Course Search | Northcentral Technical College

Machine Control 1: Ladder Logic Fundamentals 10620151

1.00 credits

Electromechanical Technology

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Benjamin Knospe	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Machine Control 2: Motor And Actuator Control 10620152

1.00 credits

Electromechanical Technology

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Benjamin Knospe	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Machine Control 3: Sensors And Machine Safety 10620153

1.00 credits

Electromechanical Technology

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Benjamin Knospe	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Industrial Applications 10664103

1.00 credits

Automation Systems Technology

Explores two main topic areas: PLC and HMI machine applications. The learner will demonstrate the ability to learn to program a PLC they have not worked with before as well as an HMI they have not worked with before. The learner will integrate the study of curriculum, technical manuals, help files and previous knowledge to demonstrate their ability to learn new technology. Learner will develop several PLC applications and several HMI applications integrated with the PLC.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Matt Jacobson	View Rates

Mechanical Systems 1: Basic Machine Components 10620157

1.00 credits

Electromechanical Technology

Introduces how machines work and basic mechanical power transmission system components.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Bryan Schroder	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Mechanical Systems 2: Power Transmission Systems 10620158

1.00 credits

Electromechanical Technology

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Bryan Schroder	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Motors 1: Electric Motors 10620159

1.00 credits

Electromechanical Technology

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Benjamin Knospe	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

1.00 credits

Electromechanical Technology

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Matt Jacobson	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Shielded Metal Arc Welding 1: E7018 10442192

1.00 credits

Welding

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Shielded Metal Arc Welding 2: E6010, E7018 10442193

1.00 credits

Welding

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

1.00 credits

Welding

Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

1.00 credits

Welding

Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

1.00 credits

Welding

Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

1.00 credits

Welding

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

1.00 credits

Welding

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

1.00 credits

Welding

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Gas Tungsten Arc Welding 4: Aluminum 10442200

1.00 credits

Welding

Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

1.00 credits

Welding

Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 6: Sheet Metal 10442205

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Introduction To Welding 10442101

1.00 credits

Welding

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Weld Inspection & Testing 10442163

1.00 credits

Welding

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Welding Safety 10442172

1.00 credits

Welding

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Thermal Cutting 10442173

1.00 credits

Welding

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Weld Print Reading 1: Basic Views And Dimensions 10442181

1.00 credits

Welding

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Weld Print Reading 2: Other Views And Symbols 10442182

1.00 credits

Welding

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - H127 - Computer Lab - H Building Robert Leafblad Aug 25 – Dec 17 - H136 - Welding Lab - H Building Robert Leafblad	View Rates
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Industry 4.0 Fundamentals 10664112

1.00 credits

Automation Systems Technology

Introduces the concepts of Industry 4.0 and the key aspects that workers will need to be prepared for in the intelligent factory setting. Robotic automation, smart manufacturing, and Artificial Intelligence (AI) concepts will be explored.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#80 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Benjamin Knospe	View Rates

Gas Metal Arc Welding 3: Spray Transfer 10442185

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

1.00 credits

Electromechanical Technology

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates

PLC 2: Timers, Counters And Program Control 10620165

1.00 credits

Electromechanical Technology

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

1.00 credits

Electromechanical Technology

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates

Industry Workplace Safety 10620172

1.00 credits

Electromechanical Technology

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#01 Fall	Open	08/26/2025 – 09/18/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Sep 18 Thursday, Tuesday 01:00 PM - 03:50 PM I104B - AME Lab - I Building Bryan Schroder Aug 26 – Sep 18 Thursday, Tuesday 01:00 PM - 03:50 PM I110 - Classroom - I Building Bryan Schroder	View Rates

Electrical Fabrication 10660118

1.00 credits

Electronics Foundation

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Intro To Microcontrollers 10660121

1.00 credits

Electronics Foundation

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

1.00 credits

Electronics Foundation

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

1.00 credits

Electronics Foundation

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

3 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#90 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Bryan Schroder	View Rates
#91 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

1.00 credits

Electronics Foundation

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#01 Fall	Open	08/26/2025 – 09/18/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Sep 18 Thursday, Tuesday 10:00 AM - 12:50 PM I110 - Classroom - I Building Bryan Schroder Aug 26 – Sep 18 Thursday, Tuesday 10:00 AM - 12:50 PM I104B - AME Lab - I Building Bryan Schroder	View Rates

Industrial Electronics Technology 4 - Electrical Systems 10660126

1.00 credits

Electronics Foundation

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Fluid Power Systems 1: Fundamentals 10612120

1.00 credits

Fluid Power Technology

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

1.00 credits

Fluid Power Technology

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Electromechanical Troubleshooting 10620173

1.00 credits

Electromechanical Technology

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Welding For Apprentices 47442443

1.00 credits

Welding

$209.95

This course highlights the similarities in equipment and technique between the major arc welding processes. Students complete introductory level competencies in the GMAW, SMAW, FCAW, and GTAW processes. Material preparation skills include shearing, sawing, grinding, and thermal cutting. This course is 40 hours for apprenticeship programs.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD003 Fall	Open	08/25/2025 – 12/17/2025	12/10/2025	In-Person	Wausau Main Campus	Aug 25 – Dec 17 Monday, Tuesday, Wednesday, Thursday 12:00 PM - 08:00 PM Wausau Main Campus Robert Leafblad	$209.95

ACLS - Advanced Cardiac Life Support 47531440

0.40 credits

Emergency Medical Services

$149.00

Medical professionals who respond to cardiovascular emergencies in and out of the hospital enhance their treatment knowledge and skills through the AHA’s ACLS training courses.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD009 Fall	Open	08/25/2025 – 08/26/2025	08/25/2025	In-Person	Wausau Main Campus	Aug 25 – Aug 26 Monday, Tuesday 08:00 AM - 04:00 PM A162 - CPR Classroom - A Building Joseph Redding Aug 25 – Aug 26 Monday, Tuesday 08:00 AM - 04:00 PM A165 - WTPD Innovation Classroom A - A Building Joseph Redding	$149.00

Building Trade Statics 10614184

3.00 credits

Architectural Technology

Explores the methods of calculating building loads and subsequent analysis of their effect on structural members. Examines topics including: the design of floor joists, headers, basement beams, tall walls and columns in residential and light commercial construction. Conventional lumber, manufactured lumber and steel beams and columns will be sized by standard calculations and manufacture/third party computer software.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 01:30 PM - 03:50 PM F212 - Classroom/Computer Lab - F Building Travis Severson Aug 26 – Dec 16 Thursday 01:00 PM - 03:30 PM F212 - Classroom/Computer Lab - F Building Travis Severson	View Rates

Construction Technology 1 10614121

3.00 credits

Architectural Technology

Introduces the learner to the fundamental materials and methods of residential construction. Explores foundations, framing, roofing, interior and exterior wall coverings, trim, stairs and insulation. Explores innovative design techniques, energy efficient construction practices, energy conservation methods and alternative energy systems through classroom discussion and lab activities. Analyzes code and application pertaining to methods and materials.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Thursday, Tuesday 10:00 AM - 12:30 PM F211 - Classroom - F Building Michael Block	View Rates

Advanced Civil 3D 10607110

3.00 credits

Civil Engineering Technology

Utilizes the knowledge gained in previous semesters to build more complex design models, add new features, and analyze their designs even further, with functions like vehicle tracking, quantity take Off tools, and storm & sanitary analysis. Provides a deeper development of complex corridor targeting in roadway design and advanced grading tools for site designs, all while adding additional underground utilities to our design models and plan sets. These tools will then again be used to create accurate construction models and plans sets ready for practical use.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person Zoom Available	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 10:00 AM - 12:50 PM H104 - Computer Lab - H Building Michael Kowal Aug 26 – Dec 16 Thursday 10:00 AM - 11:50 AM H104 - Computer Lab - H Building Michael Kowal	View Rates

Advanced Page Layout 10204130

2.00 credits

Graphic Communication Tech

Applies techniques and skills learned in previous computer courses to advanced page layout projects. Learners will revisit the principles of design, prioritize work, prepare jobs for production, create output ready documents, examine the job planning process and apply advanced techniques for print, web and mobile presentation.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/14/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Oct 14 Tuesday 09:00 AM - 11:50 AM H123 - Computer Lab - H Building Andrew Somers Aug 26 – Oct 14 Tuesday 01:00 PM - 02:50 PM H123 - Computer Lab - H Building Andrew Somers	View Rates

Construction Technology 2 10614122

3.00 credits

Architectural Technology

Introduces the learner to the application of principles of mechanical systems, which includes: electrical, plumbing, heating, ventilation and air conditioning. Heat loss calculations will be completed in both long-hand and computer based. A systems approach to environmentally responsible and sustainable homes will be addressed and studied.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/17/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 17 Tuesday 08:00 AM - 09:50 AM F212 - Classroom/Computer Lab - F Building Michael Block Aug 26 – Dec 17 Wednesday 10:00 AM - 12:50 PM F211 - Classroom - F Building Michael Block	View Rates

Basic Engineering Statics 10607112

1.00 credits

Civil Engineering Technology

Provides an introduction to Statics related to Engineering including the following topics; general static principals; force vectors; force system resultants; structural analysis (including simple trusses, zero-force members, and method of sections); characteristics of friction (including dry friction, wedges, and rolling resistance); center of gravity; and moments of inertia.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person Zoom Available	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 01:00 PM - 01:50 PM H104 - Computer Lab - H Building Michael Kowal	View Rates

Architectural Design 3 10614155

3.00 credits

Architectural Technology

Provides instruction in the design and preparation of working drawings for a tri-level residence on a city lot to meet local and state codes. Learners will prepare drawings for bidding as produced in an architectural or custom design office. Coursework will include the preparation of site plans, floor plans, foundation plans, elevations, sections, framing plans and finish schedules. Special emphasis is placed on utilizing high efficiency approaches to building construction.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 10:00 AM - 12:30 PM F212 - Classroom/Computer Lab - F Building Travis Severson Aug 26 – Dec 16 Thursday 09:00 AM - 11:50 AM F212 - Classroom/Computer Lab - F Building Travis Severson	View Rates

Servo Systems 1: Fundamentals Of Industrial Control Systems 10620161

1.00 credits

Electromechanical Technology

Applies the principles of industrial control systems. Students learn the fundamentals of operating various industrial control systems including open/closed loop servo-hydraulics and PID control systems.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 09/18/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Sep 18 Thursday, Tuesday 10:00 AM - 12:50 PM I104B - AME Lab - I Building Matt Jacobson Aug 26 – Sep 18 Thursday, Tuesday 10:00 AM - 12:50 PM H129 - Classroom - H Building Matt Jacobson	View Rates

Advanced Drive Applications 10664108

1.00 credits

Automation Systems Technology

Program drive parameters for a drive application. This course will teach students how to create a custom parameter group based upon drive applications. Throughout this course, the instructor will cover a range of topics from establishing communications with a PowerFlex 525 drive via a USB connection and Ethernet/IP network to test parameters of a PowerFlex 525 drive and control a drive in STUDIO 5000.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 09/18/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Sep 18 Thursday, Tuesday 12:30 PM - 03:20 PM H129 - Classroom - H Building Dustin Van De Weerd Aug 26 – Sep 18 Thursday, Tuesday 12:30 PM - 03:20 PM I104B - AME Lab - I Building Dustin Van De Weerd	View Rates

Print Reading For The Machine Trades 3 32420656

1.00 credits

Machine Shop

Develop advanced proficiency in reading and interpreting working industrial drawings, including assembly prints and detail prints. Specialized part prints are covered including gears, fastener, springs, cams, plastic components and sheet metal type drawings.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Oct 16 Thursday, Tuesday 07:00 AM - 08:50 AM H115 - Machine Tool Lab/Classroom - H Building Jeff Block	View Rates

Machine Tool Programming 1 32420339

1.00 credits

Machine Shop

Provides fundamentals of computer-controlled machine tools to include conversational language and basic G & M code programming. Emphasis on increasing productivity, setup procedures, reliability, repeatability and flexibility. Basic G & M codes work coordinates machine axis information associated with CNC machining will be taught.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Waitlist	08/26/2025 – 10/15/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Oct 15 Tuesday, Wednesday 12:00 PM - 01:50 PM H115 - Machine Tool Lab/Classroom - H Building Joseph Bonke	View Rates

Capstone CELL Integration 10664107

4.00 credits

Automation Systems Technology

Focuses on integration of a complete automated manufacturing cell. Typical components include programmable controllers, robot, sensors, drives, conveyors, pneumatics, hard automation, control wiring and vision systems. Students plan, wire, program, troubleshoot and develop an automated manufacturing process based on the “product” chosen by the group. All required programming and documentation for the entire automation system is required

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 08:00 AM - 09:50 AM I104A - AME Lab - I Building Benjamin Knospe Aug 26 – Dec 16 Tuesday 10:00 AM - 12:20 PM I105 - Smart Project Factory Lab - I Building Benjamin Knospe Aug 26 – Dec 16 Thursday 08:00 AM - 08:50 AM I104A - AME Lab - I Building Benjamin Knospe Aug 26 – Dec 16 Thursday 09:00 AM - 12:20 PM I105 - Smart Project Factory Lab - I Building Benjamin Knospe	View Rates

Welding Career Exploration 10442203

1.00 credits

Welding

Develops awareness of career opportunities and career preparedness in the welding field. Employer presentations and plant tours clarify technical and success skill expectations in the trade. Learners assess their own passions and motivations to develop a career and plan. Digital portfolio development is introduced, along with professional media presence. Learners explore NTC career services, including resume development, job searches and mock interviews.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/14/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Oct 14 Tuesday 01:00 PM - 03:50 PM H124 - Trades Classroom - H Building Jesse Richardson	View Rates

Intro To Surgical Technology 10512125

4.00 credits

Surgical Technician

Provides the foundational knowledge of the occupational environment. Principles of sterilization and disinfection are learned. Surgical instruments are introduced. Preoperative patient care concepts are simulated. Lab practice is included.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Thursday, Tuesday 10:00 AM - 12:00 PM 3049 - Open Surgical Suite - Center for Health Sciences (CHS) Tyler Mann Aug 26 – Dec 16 Thursday, Tuesday 09:00 AM - 10:00 AM 3045 - Mock Surgical Classroom - Center for Health Sciences (CHS) Tyler Mann	View Rates

Surgical Tech Fundamentals 1 10512126

4.00 credits

Surgical Technician

Focuses on preparing the patient and operating room for surgery. Principles of sterile technique are emphasized as the student moves into the scrub role. Lab practice is included.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Thursday, Tuesday 02:00 PM - 04:00 PM 3049 - Open Surgical Suite - Center for Health Sciences (CHS) Tyler Mann Aug 26 – Dec 16 Thursday, Tuesday 01:00 PM - 02:00 PM 3045 - Mock Surgical Classroom - Center for Health Sciences (CHS) Tyler Mann	View Rates

Restaurant Operations 10316114

4.00 credits

Culinary Arts

Prepare foods in a lab setting while participating in various stations that are typically found in a restaurant. Learners will establish skills in serving, cooking, and customer service.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 11/06/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Nov 6 Thursday, Tuesday, Wednesday 08:00 AM - 02:00 PM E112 - Culinary Lab Wausau - E Building Jonathan Reinke Oct 3 Friday 04:00 PM - 10:00 PM E112 - Culinary Lab Wausau - E Building Jonathan Reinke Nov 3 Monday 08:00 AM - 02:00 PM E112 - Culinary Lab Wausau - E Building Jonathan Reinke	View Rates

Interviews/Interrogations 10504142

3.00 credits

Criminal Justice

Develops skills in interviewing crime victims, witnesses and suspects. Provides role play experience in interviewing and interrogation techniques for a variety of offenses, including sexual assault, robbery, theft, battery and other types of criminal offenses.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 08:00 AM - 10:50 AM A216 - Classroom - A Building Eric Soberg Aug 26 – Dec 16 Tuesday 08:00 AM - 10:50 AM A241 - Helping Skills Lab - A Building Eric Soberg	View Rates

Report Documentation 10504178

3.00 credits

Criminal Justice

Develops a variety of law enforcement reports, utilizing field notes to accurately and fairly convey necessary information for use by investigators, prosecutors and the public.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 09:00 AM - 11:50 AM D128 - CJ Classroom - D Building Koua Thao	View Rates

Traffic Investigation 10504181

3.00 credits

Criminal Justice

Investigates traffic crashes to determine cause. Learners utilize traffic incident management and investigative principles to complete investigations and necessary follow up to determine appropriate level of enforcement. Learners prepare documentation including Wisconsin Motor Vehicle Accident Report, Uniform Traffic Citation, photographs and drawings. Learners administer field sobriety tests and interpret indicators of impaired driving.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 09:00 AM - 11:50 AM A236 - Computer Lab - A Building Matthew Kecker	View Rates

Professional Fitness 10504152

1.00 credits

Criminal Justice

Prepares learners for meeting LESB entry requirements for fitness. Learners will focus on nutrition and mental and physical wellness.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/17/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 17 Wednesday 11:00 AM - 12:00 PM D150 - DAAT Room Wausau - D Building Eric Soberg Aug 26 – Dec 17 Tuesday 11:00 AM - 12:00 PM D150 - DAAT Room Wausau - D Building Eric Soberg	View Rates

Understanding Substance Use 10550201

3.00 credits

Substance Use Disorder Counseling

Explore the bio-psych social dynamics of substance use. Examine treatment approaches, models, and screening criteria. Examine substances of abuse, history of SUDs, and their impact on the individual and society.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/14/2025	08/30/2025	In-Person Zoom Available	Wausau Main Campus	Aug 26 – Oct 14 Tuesday 08:30 AM - 12:30 PM A229 - Classroom - A Building Christina Lucas	View Rates

Respiratory Airway Management 10515112

2.00 credits

Respiratory Therapy

Provides a comprehensive exploration of airway management concepts and skills. Emphasis is placed on promotion of evidence-based practice using established clinical practice guidelines and published research for its relevance to patient care.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/12/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 12 Friday 02:30 PM - 04:30 PM 2019 - Respiratory Therapy Classroom - Center for Health Sciences (CHS) Eric Nelson Aug 26 – Dec 12 Tuesday 01:30 PM - 04:00 PM 2019 - Respiratory Therapy Classroom - Center for Health Sciences (CHS) Eric Nelson	View Rates

Microbiology 10806197

4.00 credits

Science

Investigates historical perspectives of microbiology, microscopy, characteristics of procaryotic and eucaryotic microorganisms, control of microbial growth, microbial genetics, and classification of microorganisms, principles of disease, epidemiology, immunology and pathogenic microbiology. Keywords: Micro, Microbio

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 09:00 AM - 11:50 AM 3016 - Classroom - Center for Health Sciences (CHS) Sara Peterson Aug 26 – Dec 16 Tuesday 01:00 PM - 02:50 PM 3023 - Microbiology Lab - Center for Health Sciences (CHS) Sara Peterson	View Rates

American Sign Language 3 10533130

2.00 credits

Interpreter Technology

Develops advanced skills in American Sign Language including vocabulary, grammar and comprehensive communication. Emphasis will be on direct frequent contact with native ASL users. The learners explores Deaf Culture. Face to face delivery only.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/17/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 17 Tuesday, Wednesday 01:00 PM - 02:30 PM A219 - Sign Language Lab - A Building Chanel Volpel	View Rates

Nursing Advanced Skills 10543112

1.00 credits

Nursing

This course focuses on the development of advanced clinical skills across the lifespan. Content includes advanced intravenous skills, blood product administration, chest tube systems, basic electrocardiogram interpretation and nasogastric/feeding tube insertion.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 09/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Sep 16 Tuesday 08:00 AM - 01:00 PM 2022B - Nursing Lab - Center for Health Sciences (CHS) Michelle Knaup Aug 26 – Sep 16 Tuesday 08:00 AM - 01:00 PM 2022A - Nursing Lab - Center for Health Sciences (CHS) Michelle Knaup	View Rates

Adv Anatomy & Physiology 10806179

4.00 credits

Science

Examines normal human anatomy and physiology using a body systems approach with emphasis on the interrelationships between form and function at the gross and microscopic levels of organization. Cellular metabolism and the individual components of body systems will be explored. Continued examination of homeostatic mechanisms and their relationship to fluid, electrolyte, acid-base balance and blood and integration of genetics to human reproduction and development are also included in this course.Keywords:Ad. A&P, GAP 2, Adv ANP, AAP, Advanced Anatomy

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 09:00 AM - 11:50 AM 3014 - Classroom - Center for Health Sciences (CHS) Richard Wilkosz Aug 26 – Dec 16 Tuesday 03:00 PM - 04:50 PM 3030 - A&P Lab - Center for Health Sciences (CHS) Richard Wilkosz	View Rates

Medical Asst Clin Procedures 1 31509304

4.00 credits

Medical Assistant

Introduces medical assistant students to the clinical procedures performed in the medical office setting. Students perform basic examining room skills including screening, vital signs, patient history, minor surgery and patient preparation for routine and specialty exams in the ambulatory care setting. Learner explore communication principles and psychology theories related to patient care.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 01:00 PM - 05:00 PM 2045 - Classroom - MA - Center for Health Sciences (CHS) Nicole Roberts Aug 26 – Dec 16 Tuesday 09:00 AM - 12:00 PM 2045 - Classroom - MA - Center for Health Sciences (CHS) Nicole Roberts	View Rates

Imaging Modalities 10526231

2.00 credits

Radiologic Technology

Introduces radiography students to imaging modalities with an emphasis in computed tomography and cross-sectional anatomy.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/09/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 9 Tuesday 08:00 AM - 09:50 AM 3031 - Radiology Classroom - Center for Health Sciences (CHS) Amber Schuck	View Rates

Careers And The Criminal Justice System 10504151

3.00 credits

Criminal Justice

Analyzes the primary functions of federal, state and local law enforcement and corrections agencies. Learners prepare for employment in public and private sectors.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 01:00 PM - 04:00 PM D128 - CJ Classroom - D Building Koua Thao	View Rates

Introduction To Diversity Studies 10809172

3.00 credits

Social Science

This course introduces the study of diversity from a local to a global perspective using a holistic, interdisciplinary approach that encourages exploration and prepares students to work in a diverse environment. The course introduces basic diversity concepts, examines the impact of bias and power differentials among groups, explores the use of culturally responsive communication strategies, and compares forces that shape diversity in an international context.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 09:00 AM - 11:50 AM A211 - Classroom - A Building Kimberly Waltz	View Rates

College Algebra W/Apps 10804195

3.00 credits

Mathematics

This course covers skills needed for success in Calculus and many application areas at the baccalaureate level. Topics include the real and complex number systems, polynomials, exponents, radicals, solving equations and inequalities, relations and functions, systems of equations and inequalities, graphing, and conic sections.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 10:00 AM - 12:50 PM A208 - Classroom - A Building Amy Pippenger	View Rates