Displaying 101 - 147 of 147 No filters currently applied.

Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

  • 0.00 credits
  • Fire Technology
  • $160.00

    • The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

    5 Course Sections
    5 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS020 Spring
    Open
    03/20/2026
    		In-Person Merrill Public Safety Center of Excellen
    Mar 20
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS021 Spring
    Open
    04/17/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 17
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS022 Spring
    Open
    05/01/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 1
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS023 Spring
    Open
    05/15/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 15
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS024 Spring
    Open
    05/29/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 29
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00

    Industry Workplace Safety 10620172

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79

    PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79

    Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29

    Machine Control 3: Sensors And Machine Safety 10620153

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79

    Mechanical Systems 2: Power Transmission Systems 10620158

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79

    PLC 2: Timers, Counters And Program Control 10620165

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79

    Industrial Motors 1: Electric Motors 10620159

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79

    Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79

    Mechanical Systems 1: Basic Machine Components 10620157

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces how machines work and basic mechanical power transmission system components.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79

    Machine Control 1: Ladder Logic Fundamentals 10620151

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Gas Metal Arc Welding 3: Spray Transfer 10442185

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding
  • $241.29

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Weld Print Reading 1: Basic Views And Dimensions 10442181

  • 1.00 credits
  • Welding
  • $241.29

    • Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding
  • $241.29

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 6: Sheet Metal 10442205

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding
  • $241.29

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Welding Safety 10442172

  • 1.00 credits
  • Welding
  • $241.29

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Weld Print Reading 2: Other Views And Symbols 10442182

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Hazardous Materials Operations 10503203

  • 1.00 credits
  • Fire Technology
  • $185.04

    • Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    08:00 AM - 12:00 PM
    Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$185.04
    #02 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    06:00 PM - 10:00 PM
    Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$185.04

    Hazardous Materials Operations 47503785

  • 0.60 credits
  • Fire Technology
  • $103.00

    • Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1001, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.

    4 Course Sections
    4 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS009 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    08:00 AM - 12:00 PM
    Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$103.00
    #PS010 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    08:00 AM - 12:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates
    #PS011 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    06:00 PM - 10:00 PM
    Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$103.00
    #PS012 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates

    Fire Fighter II Practical Exam 98FIREB

  • 0.00 credits
  • Fire Technology

    • Practical skills testing for Fire Fighter II state certification.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS002 Spring
    Open
    05/30/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 30
    Saturday
    12:00 PM - 04:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates

    Fire Fighter 1 Practical Exam 98FIREA

  • 0.00 credits
  • Fire Technology

    • Practical skills testing for Fire Fighter 1 state certification.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Spring
    Open
    05/30/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 30
    Saturday
    08:00 AM - 12:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates