Post Secondary

Gas Metal Arc Welding 3: Spray Transfer 10442185

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

1.00 credits

Electromechanical Technology

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates

Post Secondary

PLC 2: Timers, Counters And Program Control 10620165

1.00 credits

Electromechanical Technology

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

1 Course Section

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates

Post Secondary

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

1.00 credits

Electromechanical Technology

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates

Post Secondary

Industry Workplace Safety 10620172

1.00 credits

Electromechanical Technology

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Post Secondary

Machine Control 1: Ladder Logic Fundamentals 10620151

1.00 credits

Electromechanical Technology

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Post Secondary

Mechanical Systems 1: Basic Machine Components 10620157

1.00 credits

Electromechanical Technology

Introduces how machines work and basic mechanical power transmission system components.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Post Secondary

Industrial Motors 1: Electric Motors 10620159

1.00 credits

Electromechanical Technology

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Post Secondary

Electromechanical Troubleshooting 10620173

1.00 credits

Electromechanical Technology

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Post Secondary

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

1.00 credits

Electromechanical Technology

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Post Secondary

Shielded Metal Arc Welding 1: E7018 10442192

1.00 credits

Welding

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Shielded Metal Arc Welding 2: E6010, E7018 10442193

1.00 credits

Welding

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Gas Metal Arc Welding 6: Sheet Metal 10442205

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Introduction To Welding 10442101

1.00 credits

Welding

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Weld Inspection & Testing 10442163

1.00 credits

Welding

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Welding Safety 10442172

1.00 credits

Welding

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Thermal Cutting 10442173

1.00 credits

Welding

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Weld Print Reading 1: Basic Views And Dimensions 10442181

1.00 credits

Welding

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Weld Print Reading 2: Other Views And Symbols 10442182

1.00 credits

Welding

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Post Secondary

Machine Control 2: Motor And Actuator Control 10620152

1.00 credits

Electromechanical Technology

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Post Secondary

Machine Control 3: Sensors And Machine Safety 10620153

1.00 credits

Electromechanical Technology

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Post Secondary

Mechanical Systems 2: Power Transmission Systems 10620158

1.00 credits

Electromechanical Technology

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

2 Course Sections

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#91 Fall	Open	10/20/2025 – 12/17/2025	10/25/2025	In-Person Open Labs	Antigo Campus	Oct 20 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates