Displaying 1 - 68 of 68 No filters currently applied.

Candidate Physical Ability Test (CPAT) - Full Session 98FIREJ

  • 0.00 credits
  • Fire Technology

    • The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS005 Fall
    Open
    08/08/2025 –
    10/03/2025
    		In-Person Public Safety Center of Excellence
    Aug 8 – Oct 3
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS006 Fall
    Open
    08/22/2025 –
    10/17/2025
    		In-Person Public Safety Center of Excellence
    Aug 22 – Oct 17
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS007 Fall
    Open
    09/05/2025 –
    10/31/2025
    		In-Person Public Safety Center of Excellence
    Sep 5 – Oct 31
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS008 Fall
    Open
    09/19/2025 –
    11/14/2025
    		In-Person Public Safety Center of Excellence
    Sep 19 – Nov 14
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS009 Fall
    Open
    10/03/2025 –
    12/05/2025
    		In-Person Public Safety Center of Excellence
    Oct 3 – Nov 14
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Dec 5
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS010 Fall
    Open
    10/17/2025 –
    12/19/2025
    		In-Person Public Safety Center of Excellence
    Oct 17 – Nov 14
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Dec 5 – Dec 19
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates

    Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

  • 0.00 credits
  • Fire Technology
  • $160.00

    • The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

    10 Course Sections
    10 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS005 Fall
    Open
    08/08/2025
    		In-Person Public Safety Center of Excellence
    Aug 8
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS006 Fall
    Open
    08/22/2025
    		In-Person Public Safety Center of Excellence
    Aug 22
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS007 Fall
    Open
    09/05/2025
    		In-Person Public Safety Center of Excellence
    Sep 5
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS008 Fall
    Open
    09/19/2025
    		In-Person Public Safety Center of Excellence
    Sep 19
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS009 Fall
    Open
    10/03/2025
    		In-Person Public Safety Center of Excellence
    Oct 3
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS010 Fall
    Open
    10/17/2025
    		In-Person Public Safety Center of Excellence
    Oct 17
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS011 Fall
    Open
    10/31/2025
    		In-Person Public Safety Center of Excellence
    Oct 31
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS012 Fall
    Open
    11/14/2025
    		In-Person Public Safety Center of Excellence
    Nov 14
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS013 Fall
    Open
    12/05/2025
    		In-Person Public Safety Center of Excellence
    Dec 5
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS014 Fall
    Open
    12/19/2025
    		In-Person Public Safety Center of Excellence
    Dec 19
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00

    Fire Fighting Principles 10503142

  • 4.00 credits
  • Fire Technology

    • Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence
    Aug 25 – Nov 10
    Monday, Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #02 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence
    Aug 25 – Nov 10
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates

    Computer Applications & Analysis For Engineers 10606109

  • 1.00 credits
  • Mechanical Technology

    • Explores use of computer software, especially spreadsheets, to perform engineering and design calculations learned in the prerequisite courses. The learner will use software applications currently being used in the engineering field and explore the interaction between various calculation and spreadsheet software and CAD applications.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Fall
    Open
    08/25/2025 –
    10/13/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 25 – Oct 13
    Monday
    01:00 PM - 03:50 PM
    F206 - Computer Lab - F Building
    Brad Schinker
    		View Rates

    Tooling & Production 10606116

  • 2.00 credits
  • Mechanical Technology

    • Develops an in-depth understanding of production systems control and planning. The learner will acquire the skills necessary for the design and creation of engineering drawings of production tools and workholder devices such as jigs and fixtures.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates

    Machine Design 2 10606117

  • 3.00 credits
  • Mechanical Technology

    • Incorporates the concepts learned in Statics and applies them to 3-dimensional applications. The learner will master the basic concepts of fatigue strength, the use of stress concentration factors, de-rating factors and factors of safety in order to compare design loads to material properties of objects in their actual working environment. The learner will understand all aspects of shaft design and will be able to properly account for all considerations when designing these common machine components.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates

    Principles Of Emerg Svcs Safety & Survival 10503192

  • 3.00 credits
  • Fire Technology

    • Introduces the basic principles and history related to the national firefighter life safety initiatives, focusing on the need for cultural and behavior change throughout the emergency services.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Kyle Lech
    		View Rates

    Building Construction For Fire Protection 10503143

  • 3.00 credits
  • Fire Technology

    • Provides the components of building construction related to firefighter and life safety. The elements of construction and design of structures are shown to be key factors when inspecting buildings, preplanning fire operations, and operating at emergencies.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Kyle Lech
    		View Rates

    Design For Manufacturing 10606107

  • 4.00 credits
  • Mechanical Technology

    • Introduction to best practices for the efficient and cost-effective design, development and production of products utilizing CAD systems. The course introduces current industry standards in key design processes including project management, team building and collaboration, creativity and innovation, and re-engineering. The learner will utilize industry methods of product design and incorporate design considerations for specific manufacturing processes to complete multiple product design projects, culminating in a final project.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Brad Schinker
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Brad Schinker
    		View Rates

    Geometric Dimensioning & Tolerancing Fundamentals 10606108

  • 1.00 credits
  • Mechanical Technology

    • Explores the fundamentals of geometric dimensioning and tolerancing (GD &T) using the ASME Y14.5-2009 standard. Dimensioning and tolerancing terms, symbols, definitions, and concepts are covered. The course provides the understanding required to apply GD & T to mechanical drawings and designs and incorporates this foundation into part inspection.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    		View Rates

    Solidworks 1 10606133

  • 1.00 credits
  • Mechanical Technology

    • Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    #03 Fall
    Open
    08/25/2025 –
    10/13/2025
    		In-Person Wausau Main Campus
    Aug 25 – Oct 13
    Monday
    11:00 AM - 01:50 PM
    F208 - Computer Lab - F Building
    Bryan LaVigne
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates

    Solidworks 2 10606134

  • 1.00 credits
  • Mechanical Technology

    • Introduces the learner to intermediate SolidWorks commands to produce 3- dimensional parts, assemblies and engineering drawings. The learner will utilize and practice their existing beginner level commands and skills while mastering intermediate level skills with an emphasis on mechanical engineering drafting and design. Upon completion the Learner will have an opportunity to take the SolidWorks Certified Associate Exam (CSWA) to obtain a highly recognized credential known worldwide.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates

    Technical Drafting/CAD 10606105

  • 2.00 credits
  • Mechanical Technology

    • Introduces basic knowledge and skill development of technical drawing with emphases on freehand sketching and introductory CAD drawing.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Brad Schinker
    		View Rates
    #03AYW Fall
    Open
    08/25/2025 –
    10/16/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 25 – Oct 16
    Thursday, Monday, Tuesday
    10:00 AM - 11:50 AM
    F206 - Computer Lab - F Building
    Brad Schinker
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Brad Schinker
    		View Rates

    Manufacturing Processes - Fabrication 10606162

  • 2.00 credits
  • Mechanical Technology

    • Introduces the student to the fundamentals of manufacturing processes used in the manufacture and design of products. Metal casting, powder metallurgy, bulk forming (forging, extrusion), sheet metal forming (rolling, drawing, bending), and joining processes are introduced. The course focuses on the materials, properties, capabilities, equipment, and design considerations for each process.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    		View Rates

    Applied Mechanics For Technicians 10606111

  • 3.00 credits
  • Mechanical Technology

    • Develop a thorough understanding of the statics and mechanics principles that are of paramount importance for learners in the engineering and technical programs. Mechanics is the branch of physical science that deals with state of rest or motion under the action of forces. Mechanics is the foundation for most engineering sciences and an indispensable prerequisite to most engineering or technical courses. In this course, you will develop a thorough understanding of the statics and mechanics principles that are of paramount importance for students in the engineering and technical programs. You will then apply these mechanics principles in various assignments and projects.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Fall
    Open
    08/25/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Aug 25 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates
    #02VC Fall
    Open
    10/20/2025 –
    12/15/2025
    		Online Flexible Due Dates Online
    Oct 20 – Dec 15
    -
    Online
    Bryan LaVigne
    		View Rates

    Certified Fire Fighter 1 47503720

  • 2.40 credits
  • Fire Technology

    • This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.

    5 Course Sections
    5 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence
    Aug 25 – Aug 27
    Monday, Wednesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Sep 3 – Nov 10
    Monday, Wednesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS004 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence
    Aug 25 – Aug 27
    Monday, Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Sep 3 – Nov 10
    Monday, Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		$413.00
    #PS005 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence
    Aug 25 – Aug 27
    Monday, Wednesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Sep 3 – Nov 10
    Monday, Wednesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS006 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence
    Aug 25 – Aug 27
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Sep 3 – Nov 10
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		$413.00
    #PS010 Fall
    Open
    08/25/2025 –
    11/10/2025
    		In-Person Public Safety Center of Excellence Spencer Off Campus
    Aug 25 – Nov 10
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Central Fire and EMS District - Spencer Off Campus
    Kyle Lech
    Oct 25
    Saturday
    08:00 AM - 04:00 PM
    Public Safety Center of Excellence
    Kyle Lech
    		View Rates

    Strength Of Materials 10606163

  • 3.00 credits
  • Mechanical Technology

    • Examines how forces affect machine members and structural elements. The learner will calculate stress and strain, analyze connections and evaluate beams and columns. The learner will use these calculations to determine if a given design will perform or fail.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Fall
    Open
    08/26/2025 –
    12/16/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 26 – Dec 16
    Thursday, Tuesday
    08:00 AM - 09:50 AM
    F210 - Classroom - F Building
    Brad Schinker
    		View Rates

    Mechanisms 10606180

  • 3.00 credits
  • Mechanical Technology

    • Introduces the techniques used in the design and analysis of mechanisms with application to machine design. Graphical and analytical methods are presented to study the motion characteristics (displacement, velocity and acceleration) of four-bar linkages, slider-cranks, cams, gears and other special mechanisms. The use of CAD and spreadsheets is emphasized.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Fall
    Open
    08/26/2025 –
    12/16/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 26 – Dec 16
    Thursday, Tuesday
    01:00 PM - 02:50 PM
    F208 - Computer Lab - F Building
    Brad Schinker
    		View Rates

    Machine Design 1 10606115

  • 2.00 credits
  • Mechanical Technology

    • Introduces the fundamentals of machine design and power transmission. The different types and capabilities of power transmission components (chain and belt drives, coupling, clutches, brakes, gear reducers, bearings, and electric motors) are introduced. The student will be  capable of proper selection of commercially available power transmission components into systems using the principles of power, torque, and speed.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Fall
    Open
    08/26/2025 –
    12/16/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 26 – Dec 16
    Thursday, Tuesday
    10:00 AM - 11:50 AM
    F208 - Computer Lab - F Building
    Bryan LaVigne
    		View Rates

    Manufacturing Processes - Machining 10606160

  • 2.00 credits
  • Mechanical Technology

    • Examines precision measurement tools and explores material removal processes, testing techniques and finishing methods as well as rapid prototyping and 3D printing. The learner will consider how these processes influence design decisions and influence part and product design.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Fall
    Open
    08/27/2025 –
    12/17/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 27 – Dec 17
    Wednesday
    01:00 PM - 03:50 PM
    F208 - Computer Lab - F Building
    Brad Schinker
    		View Rates

    Autodesk Inventor 3D CAD Software 10606130

  • 2.00 credits
  • Mechanical Technology

    • Introduces the 3-dimensional modeling software Inventor to create solid part models, sheet metal and assemblies. The learner will create parts and assemblies as well as related 2D working drawings, bills of materials and animations. Learners will practice their skills on a variety of projects with various levels of difficulty.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Fall
    Open
    08/27/2025 –
    12/17/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 27 – Dec 17
    Wednesday
    09:00 AM - 11:50 AM
    F208 - Computer Lab - F Building
    Brad Schinker
    		View Rates

    Materials Of Industry 10606132

  • 2.00 credits
  • Mechanical Technology

    • In this course, you will be involved in the in-depth examination of manufacturing materials related to the ultimate design decision involved in part and product design. You will learn the principles and theory of the methodology of material selection, the properties of materials, the structure of materials and specific materials and their function in product application.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03AYW Fall
    Open
    08/27/2025 –
    12/17/2025
    		Attend Your Way Online Available Wausau Main Campus
    Aug 27 – Dec 17
    Wednesday
    10:00 AM - 11:50 AM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		View Rates

    Fire Apparatus Driver Operator - Aerial 47503747

  • 0.90 credits
  • Fire Technology

    • This 36-hour course prepares the participant to be able to perform aerial fire apparatus driving, positioning, operating and testing functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the Fire Apparatus Driver/Operator- Pumper course. This course is designed to provide the Driver/Operator-Aerial candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1002, Standard for Fire Apparatus Driver/Operator Professional Qualifications, Chapters 4 and 6.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Fall
    Open
    09/09/2025 –
    11/04/2025
    		In-Person Antigo Campus
    Sep 9 – Nov 4
    Tuesday
    06:00 PM - 10:00 PM
    T131 - Classroom - Antigo Campus
    Bryson Cruise
    		View Rates

    Advanced Firefighter Concepts 10503160

  • 2.00 credits
  • Fire Technology

    • Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    12/02/2025
    		In-Person Public Safety Center of Excellence
    Sep 23 – Dec 2
    Tuesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Kyle Lech
    		View Rates

    Firefighter II Certification 47503730

  • 1.05 credits
  • Fire Technology

    • This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition. Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS001 Fall
    Open
    09/23/2025 –
    12/02/2025
    		In-Person Public Safety Center of Excellence
    Sep 23 – Dec 2
    Tuesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    		View Rates
    #PS002 Fall
    Open
    09/23/2025 –
    12/02/2025
    		In-Person Public Safety Center of Excellence
    Sep 23 – Dec 2
    Tuesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    		$184.00

    Technical Detailing 10606128

  • 2.00 credits
  • Mechanical Technology

    • Expands basic knowledge and skill development of mechanical drawing. Emphasis is placed on fits and tolerances, geometric and positional dimensioning and tolerancing, assembly and detail drawings and parts lists.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03AYW Fall
    Open
    10/20/2025 –
    12/16/2025
    		Attend Your Way Online Available Wausau Main Campus
    Oct 20 – Dec 16
    Thursday, Monday, Tuesday
    10:00 AM - 11:50 AM
    F206 - Computer Lab - F Building
    Brad Schinker
    		View Rates

    Hazardous Materials Operations 10503203

  • 1.00 credits
  • Fire Technology

    • Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Public Safety Center of Excellence
    Nov 12 – Dec 3
    Monday, Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #02 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Public Safety Center of Excellence
    Nov 12 – Dec 3
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates

    Hazardous Materials Operations 47503785

  • 0.60 credits
  • Fire Technology

    • Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1001, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.

    5 Course Sections
    5 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Public Safety Center of Excellence
    Nov 12
    Wednesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Nov 17 – Nov 19
    Monday, Wednesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Nov 24
    Monday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Dec 1 – Dec 3
    Monday, Wednesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS004 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Public Safety Center of Excellence
    Nov 12
    Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Nov 17 – Nov 19
    Monday, Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Nov 24
    Monday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Dec 1 – Dec 3
    Monday, Wednesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		$103.00
    #PS005 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Public Safety Center of Excellence
    Nov 12
    Wednesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Nov 17 – Nov 19
    Monday, Wednesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Nov 24
    Monday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    Dec 1 – Dec 3
    Monday, Wednesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS006 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Public Safety Center of Excellence
    Nov 12
    Wednesday
    06:00 AM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Nov 17 – Nov 19
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Nov 24
    Monday
    06:00 AM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Dec 1 – Dec 3
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		$103.00
    #PS007 Fall
    Open
    11/12/2025 –
    12/03/2025
    		In-Person Spencer Off Campus
    Nov 12
    Wednesday
    06:00 PM - 10:00 PM
    Central Fire and EMS District - Spencer Off Campus
    Kyle Lech
    Nov 17 – Nov 19
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Central Fire and EMS District - Spencer Off Campus
    Kyle Lech
    Nov 24
    Monday
    06:00 PM - 10:00 PM
    Central Fire and EMS District - Spencer Off Campus
    Kyle Lech
    Dec 1 – Dec 3
    Monday, Wednesday
    06:00 PM - 10:00 PM
    Central Fire and EMS District - Spencer Off Campus
    Kyle Lech
    		View Rates

    Fire Fighter II Practical Exam 98FIREB

  • 0.00 credits
  • Fire Technology

    • Practical skills testing for Fire Fighter II state certification.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS001 Fall
    Open
    12/06/2025
    		In-Person Public Safety Center of Excellence
    Dec 6
    Saturday
    12:01 PM - 04:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		View Rates

    Fire Fighter 1 Practical Exam 98FIREA

  • 0.00 credits
  • Fire Technology

    • Practical skills testing for Fire Fighter 1 state certification.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS001 Fall
    Open
    12/06/2025
    		In-Person Public Safety Center of Excellence
    Dec 6
    Saturday
    08:00 AM - 12:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		View Rates