Displaying 1 - 29 of 29 No filters currently applied.

Electrical Control Systems And Troubleshooting 50413519

  • 4.00 credits
  • Electricity
  • $686.40

    • Leads learner through the fundamentals of electric motor control. Learner will learn to recognize and draw the symbols and language of motor control, and how to apply these symbols into current industrial format. Learner will also learn to draw and read ladder and wiring diagrams. Learner will be introduced to the logic used in motor control and be required to apply this logic in order to correctly interpret, troubleshoot, design, and wire control circuits.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/05/2026 –
    05/18/2026
    		In-Person Wausau Main Campus
    Jan 5 – Jan 12
    Monday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Jan 5 – Jan 12
    Monday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    Jan 26 – Feb 16
    Monday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Jan 26 – Feb 16
    Monday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    Mar 2 – May 18
    Monday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Mar 2 – May 18
    Monday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		$686.40

    Basics Of Gas Appliances 31413110

  • 2.00 credits
  • Electricity
  • $370.08

    • Investigates installation and maintenance of gas appliances. Covers reading wiring diagrams, component functions and operation, different ignition types, equipment testing, troubleshooting, proper venting codes, and industry safe practices.  Covers leak detection for both gas and carbon monoxide, and make safe procedures. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/05/2026 –
    01/14/2026
    		In-Person Agriculture Center of Excellence
    Jan 5 – Jan 14
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 04:30 PM
    AG402 - Gas Utilities Classroom - Agriculture Center of Excellence
    		$370.08

    Programmable Logic Controllers 1 50413512

  • 2.00 credits
  • Electricity
  • $343.20

    • Introduces the fundamentals of the programmable logic controller and its programming software. Learners identify terminology and components, explore functions, analyze logic instructions, interpret ladder logic, and develop basic programming and troubleshooting skills.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    01/06/2026 –
    03/03/2026
    		In-Person Wausau Main Campus
    Jan 6 – Mar 3
    Tuesday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    Marc Martindale
    Jan 6 – Mar 3
    Tuesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    		$343.20
    #01 Spring
    Open
    01/08/2026 –
    03/12/2026
    		In-Person Wausau Main Campus
    Jan 8 – Jan 15
    Thursday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    Marc Martindale
    Jan 8 – Jan 15
    Thursday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    Jan 29 – Mar 12
    Thursday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    Marc Martindale
    Jan 29 – Mar 12
    Thursday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    		$343.20

    Basic Electrical Control Systems 50413523

  • 2.00 credits
  • Electricity
  • $343.20

    • Leads learner through the basic fundamentals of electric motor control. Learner will learn to recognize and draw the basic symbols and language of motor control, and how to apply these symbols into current industrial format. Learner will also learn to read ladder and wiring diagrams. Learner will be introduced to the logic used in motor control and be required to apply this logic in order to correctly interpret and troubleshoot control circuits.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/09/2026 –
    03/06/2026
    		In-Person Wausau Main Campus
    Jan 9 – Mar 6
    Friday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Jan 9 – Mar 6
    Friday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		$343.20

    Line Electrician Field Training 3 31413107

  • 5.00 credits
  • Electricity
  • $925.20

    • Introduces learners to pole guying, wire pulling, overhead secondary and service connections.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/26/2026 –
    03/05/2026
    		In-Person Agriculture Center of Excellence
    Jan 26 – Mar 5
    Tuesday
    08:00 AM - 09:00 AM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    Jan 26 – Mar 5
    Thursday, Monday, Wednesday
    08:00 AM - 03:30 PM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    Jan 26 – Mar 5
    Tuesday
    10:00 AM - 03:30 PM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    		$925.20

    Computer Illustration 10204122

  • 2.00 credits
  • Graphic Communication Tech
  • $370.08

    • Introduces learners to the concepts and applications of computer illustration in the field of graphic communications. Learners will use Adobe Illustrator in the creation and manipulation of vector graphics for use in print, web and motion graphics.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/26/2026 –
    03/16/2026
    		In-Person Wausau Main Campus
    Jan 26 – Mar 16
    Monday
    01:00 PM - 02:50 PM
    H123 - Computer Lab - H Building
    Daniel Seanor
    Jan 26 – Mar 16
    Monday
    09:00 AM - 11:50 AM
    H123 - Computer Lab - H Building
    Daniel Seanor
    		$370.08
    #01VC Spring
    Open
    01/26/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Jan 26 – May 20
    -
    Online
    Andrew Somers
    		$370.08
    #02VC Spring
    Open
    03/23/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Mar 23 – May 20
    -
    Online
    Andrew Somers
    		$370.08

    Industry Applications 10204186

  • 4.00 credits
  • Graphic Communication Tech
  • $740.16

    • Applies skills learned in Press Systems and Advanced Press Operations and puts them into practice in a commercial printing environment. Learners will handle and produce actual printing orders using the procedures followed in the commercial printing plant. Learners will be responsible for identifying production requirements, establishing standards, learning customer relation skills and producing actual jobs from pre-press through press work, finishing and delivery of the job.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/26/2026 –
    05/18/2026
    		In-Person Wausau Main Campus
    Jan 26 – May 18
    Monday
    01:00 PM - 02:50 PM
    H109 - Mac Lab - H Building
    Andrew Somers
    Jan 26 – May 18
    Monday
    08:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Andrew Somers
    		$740.16

    Introduction To Graphics Software And Design 10204121

  • 2.00 credits
  • Graphic Communication Tech
  • $370.08

    • Introduces the concepts and techniques involved in typography and design. Learners explore the principles of design to create layouts that are organized, attract the intended audience and work in producing the intended results. The learners will do this while also learning about various graphic design software programs.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Spring
    Open
    01/26/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Jan 26 – May 20
    -
    Online
    Andrew Somers
    		$370.08
    #02VC Spring
    Open
    03/23/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Mar 23 – May 20
    -
    Online
    Andrew Somers
    		$370.08

    Photoshop/Image Manipulation 10204126

  • 2.00 credits
  • Graphic Communication Tech
  • $370.08

    • Explores Adobe Photoshop as a tool to create, adjust and manipulate images for print and web. Special attention is given to image manipulation techniques, color/tonal correction, resolution and output issues. Familiarity with Macintosh operating system suggested.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Spring
    Open
    01/26/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Jan 26 – May 20
    -
    Online
    Daniel Seanor
    		$370.08
    #02VC Spring
    Open
    03/23/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Mar 23 – May 20
    -
    Online
    Daniel Seanor
    		$370.08

    Graphics For Web Design 10204116

  • 2.00 credits
  • Graphic Communication Tech
  • $370.08

    • Introduces learners to basic web page design for graphics professionals. Learners will be introduced to the fundamentals of the web and web page design. Learners will utilize software to create website projects that are organized, attract the intended audience and work in producing the intended results.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Spring
    Open
    01/26/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Jan 26 – May 20
    -
    Online
    Daniel Seanor
    		$370.08
    #02VC Spring
    Open
    03/23/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Mar 23 – May 20
    -
    Online
    Daniel Seanor
    		$370.08

    Digital Photography 10204135

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Explores digital photography. This course will cover digital camera features, digital image basics, using digital cameras, composition, photographic techniques and basic digital image editing.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01VC Spring
    Open
    01/26/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Jan 26 – May 20
    -
    Online
    Daniel Seanor
    		$555.12
    #02VC Spring
    Open
    03/23/2026 –
    05/20/2026
    		Online Flexible Due Dates Online
    Mar 23 – May 20
    -
    Online
    Daniel Seanor
    		$555.12

    Line Electrician Safety 3 31413108

  • 1.00 credits
  • Electricity
  • $171.29

    • Establishes safety procedures in pole top rescue techniques, and protective grounding, low voltage construction, and tree trimming methods and tools. Prepares learners to identify and establish a safe traffic work zone.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/27/2026 –
    03/06/2026
    		Online Required Due Dates Online
    Jan 27 – Mar 6
    -
    Online
    Marc Cegielski
    		$171.29

    Distribution Construction Standards 31413105

  • 1.00 credits
  • Electricity
  • $171.29

    • Analyzes distribution construction standards for overhead, underground, primary, secondary, clearances, code requirements, map/diagram reading and safe work practices.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/27/2026 –
    04/21/2026
    		In-Person Agriculture Center of Excellence
    Jan 27 – Apr 21
    Tuesday
    09:00 AM - 10:00 AM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    		$171.29

    Portfolio Preparation 10204129

  • 2.00 credits
  • Graphic Communication Tech
  • $370.08

    • Develops a professional portfolio of work for use in job search and acquisition. Learners create physical and digital portfolios for professional marketing and job search. Learners examine job search processes, produce a resume, develop interview skills, investigate industry work ethics and standards and participate in mock interviews.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/27/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Jan 27 – May 19
    Tuesday
    08:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Andrew Somers
    		$370.08

    Cross Media Personalization 10204183

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Explore the software, systems and processes used in planning and producing personalized and integrated cross-media projects. Learners will work with databases, layout issues, dynamic content, and variable data digital printing and personalization techniques.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/28/2026 –
    03/18/2026
    		In-Person Wausau Main Campus
    Jan 28 – Mar 18
    Wednesday
    01:00 PM - 02:50 PM
    H123 - Computer Lab - H Building
    Andrew Somers
    Jan 28 – Mar 18
    Wednesday
    09:00 AM - 11:50 AM
    H123 - Computer Lab - H Building
    Andrew Somers
    		$555.12

    Digital Video 10204118

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Explore digital video and much of the technology and skills used to produce digital movies. The course will cover digital video equipment, digital video formats, pre-production, video capture, audio capture, editing and rendering and outputting digital video.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/28/2026 –
    03/18/2026
    		In-Person Wausau Main Campus
    Jan 28 – Mar 18
    Wednesday
    01:00 PM - 02:50 PM
    H109 - Mac Lab - H Building
    Daniel Seanor
    Jan 28 – Mar 18
    Wednesday
    09:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Daniel Seanor
    		$555.12

    Line Electrician Field Training 4 31413109

  • 5.00 credits
  • Electricity
  • $925.20

    • Introduces learners to primary overhead work. Learners will continue to practice advanced pole climbing techniques, and operate utility trucks and equipment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/09/2026 –
    04/23/2026
    		In-Person Agriculture Center of Excellence
    Mar 9 – Apr 23
    Tuesday
    08:00 AM - 09:00 AM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    Mar 9 – Apr 23
    Thursday, Monday, Wednesday
    08:00 AM - 03:30 PM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    Mar 9 – Apr 23
    Tuesday
    10:00 AM - 03:30 PM
    AG401 - EPDP Classroom - Agriculture Center of Excellence
    Marc Cegielski
    		$925.20

    Electrical Skill Development 50413508

  • 2.00 credits
  • Electricity
  • $343.20

    • Introduces the apprentice to the layout and purpose of the National Electric Code. It also strives to teach the apprentice proper methodology to research a code question and correctly interpret what they are reading. Various examples in the textbook and activity sheets help guide the apprentice through this process.  Apprentices will research the structure of the National Electric Code and define the requirements of the code that are common to all electrical installations and electrical codes applicable to the trade.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/10/2026 –
    05/05/2026
    		In-Person Wausau Main Campus
    Mar 10 – May 5
    Tuesday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Mar 10 – May 5
    Tuesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		$343.20

    Transformers & Motors 50413518

  • 2.00 credits
  • Electricity
  • $343.20

    • Introduces the Industrial Electrician Apprentice to the basic concepts of single and three-phase transformers. The course will cover transformer theory, turns, current and voltage ratios as well as proper connections and use of various transformers. In addition, this course is designed to give the Industrial Electrician Apprentice the knowledge required by industry to maintain electric motors and generators.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/18/2026 –
    05/13/2026
    		In-Person Wausau Main Campus
    Mar 18 – May 13
    Wednesday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Mar 18 – May 13
    Wednesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		$343.20

    Process Measurement 50413505

  • 2.00 credits
  • Electricity
  • $343.20

    • Apprentices will learn to describe and explain the make-up of an automatic control loop, the function of each of the control loop elements and the terms used to describe the loop performance and characteristics, perform mathematical functions associated with offset math and apply the concepts to common signaling systems use used in process control systems. Course will examine the principles, methods and devices used to measure flows, temperatures, pressures, levels, and densities in various industrial process applications. Course will explore common methods and types of equipment used to measure chemical components of a material or stream.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/19/2026 –
    05/14/2026
    		In-Person Wausau Main Campus
    Mar 19 – May 14
    Thursday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    Marc Martindale
    Mar 19 – May 14
    Thursday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    		$343.20

    Postpress Operations 10204181

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Explore current and emerging technologies for postpress operations in bindery and finishing. Learners will perform postpress production on a variety of types of printed products. Learners will also develop skills in job planning from the postpress perspective, paper and paper calculations, quality control in post press, equipment operation and efficiency and productivity in post press.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 23 – May 19
    Monday, Tuesday
    09:00 AM - 11:50 AM
    H123 - Computer Lab - H Building
    Daniel Seanor
    Mar 23 – May 19
    Monday, Tuesday
    01:00 PM - 02:50 PM
    H123 - Computer Lab - H Building
    Daniel Seanor
    Mar 23 – May 19
    Monday, Tuesday
    01:00 PM - 02:50 PM
    H111 - Printing Lab - H Building
    Daniel Seanor
    Mar 23 – May 19
    Monday, Tuesday
    09:00 AM - 11:50 AM
    H111 - Printing Lab - H Building
    Daniel Seanor
    		$555.12

    Press Systems 10204182

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Analyzes offset, digital, flexographic and large format printing as learners work on projects within an individual and team environment. Four-color process and the PMS color system along with other printing concepts will be explained. Learners should take Introduction to Printing (10-204-112) before this course, or have prior knowledge of the printing industry.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/25/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H109 - Mac Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Andrew Somers
    		$555.12