Displaying 1 - 15 of 15 No filters currently applied.

Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/26/2026 –
    02/03/2026
    		In-Person Wausau Main Campus
    Jan 26 – Feb 3
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Jan 26 – Feb 3
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/09/2026 –
    02/16/2026
    		In-Person Wausau Main Campus
    Feb 9 – Feb 16
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Feb 9 – Feb 16
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Gas Metal Arc Welding 6: Sheet Metal 10442205

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    12/01/2025 –
    12/17/2025
    		In-Person Wausau Main Campus
    Dec 1 – Dec 17
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Dec 1 – Dec 17
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		$241.29

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding
  • $241.29

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/16/2026 –
    03/18/2026
    		In-Person Wausau Main Campus
    Mar 16 – Mar 18
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 16 – Mar 18
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    04/08/2026
    		In-Person Wausau Main Campus
    Mar 23 – Apr 8
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 23 – Apr 8
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/13/2026 –
    04/22/2026
    		In-Person Wausau Main Campus
    Apr 13 – Apr 22
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Apr 13 – Apr 22
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/27/2026 –
    05/06/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 6
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Apr 27 – May 6
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding
  • $241.29

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/11/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    May 11 – May 20
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    May 11 – May 20
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding
  • $241.29

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/17/2026 –
    02/25/2026
    		In-Person Wausau Main Campus
    Feb 17 – Feb 25
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Feb 17 – Feb 25
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/02/2026 –
    03/11/2026
    		In-Person Wausau Main Campus
    Mar 2 – Mar 11
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 2 – Mar 11
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Welding Fabrication Techniques 1: International Weld Symbols 10442189

  • 1.00 credits
  • Welding
  • $241.29

    • This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    01/26/2026 –
    02/17/2026
    		In-Person Wausau Main Campus
    Jan 26 – Feb 17
    Monday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Jan 26 – Feb 17
    Tuesday
    07:00 AM - 09:50 AM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

  • 1.00 credits
  • Welding
  • $241.29

    • This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/24/2026 –
    03/17/2026
    		In-Person Wausau Main Campus
    Feb 24 – Mar 17
    Monday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Feb 24 – Mar 17
    Tuesday
    07:00 AM - 09:50 AM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Welding Fabrication Techniques 3: Production Welding 10442191

  • 1.00 credits
  • Welding
  • $241.29

    • Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 23 – May 19
    Monday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 23 – May 19
    Tuesday
    07:00 AM - 09:50 AM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Welding For Apprentices 47442443

  • 1.00 credits
  • Welding
  • $209.95

    • This course highlights the similarities in equipment and technique between the major arc welding processes. Students complete introductory level competencies in the GMAW, SMAW, FCAW, and GTAW processes. Material preparation skills include shearing, sawing, grinding, and thermal cutting. This course is 40 hours for apprenticeship programs.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD003 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Wausau Main Campus
    Aug 25 – Dec 17
    Monday, Tuesday, Wednesday
    12:00 PM - 08:00 PM
    Wausau Main Campus
    Robert Leafblad
    Aug 28 – Dec 11
    Thursday
    12:00 PM - 05:00 PM
    Wausau Main Campus
    Robert Leafblad
    		$209.95
    #PD004 Spring
    Open
    01/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Jan 26 – May 21
    Monday, Tuesday, Wednesday, Thursday
    12:00 PM - 08:00 PM
    Wausau Main Campus
    Robert Leafblad
    		$209.95