Displaying 101 - 120 of 120 No filters currently applied.

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding
  • $241.29

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Welding Safety 10442172

  • 1.00 credits
  • Welding
  • $241.29

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding
  • $241.29

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding
  • $241.29

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding
  • $241.29

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		$241.29

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$173.79

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$173.79

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$171.29

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Babysitting Certification 47531506

  • 0.20 credits
  • Emergency Medical Services
  • $71.00

    • This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD037 Spring
    Open
    05/02/2026
    		In-Person Phillips Campus
    May 2
    Saturday
    08:00 AM - 03:00 PM
    P162 - Classroom - Phillips Campus
    Andrea Lerch
    		$71.00

    Heartsaver First Aid/CPR/AED 47531475

  • 0.15 credits
  • Emergency Medical Services
  • $61.00

    • Heartsaver 1st Aid, CPR/AED training which includes adult, child and infant. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD041 Spring
    Open
    05/09/2026
    		In-Person Phillips Campus
    May 9
    Saturday
    08:00 AM - 01:00 PM
    P162 - Classroom - Phillips Campus
    		$61.00

    BLS (Basic Life Support) CPR 47531437

  • 0.10 credits
  • Emergency Medical Services
  • $40.00

    • This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD094 Spring
    Open
    05/27/2026
    		In-Person Phillips Campus
    May 27
    Wednesday
    05:30 PM - 09:30 PM
    P162 - Classroom - Phillips Campus
    		$40.00