Displaying 1 - 75 of 75 No filters currently applied.

BLS (Basic Life Support) CPR Refresher 47531438

  • 0.10 credits
  • Emergency Medical Services
  • $35.00

    • This American Heart Association approved course is a refresher for those already meeting requirements for CPR as a Healthcare Provider. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD031 Summer
    Open
    07/17/2025
    		In-Person Phillips Campus
    Jul 17
    Thursday
    06:00 PM - 09:00 PM
    P162 - Classroom - Phillips Campus
    Kristie Hughes
    		$35.00
    #PD039 Fall
    Open
    09/25/2025
    		In-Person Phillips Campus
    Sep 25
    Thursday
    06:00 PM - 09:00 PM
    P162 - Classroom - Phillips Campus
    Kristie Hughes
    		$35.00

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		View Rates

    PLC 2: Timers, Counters And Program Control 10620165

  • 1.00 credits
  • Electromechanical Technology

    • Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		View Rates

    PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

  • 1.00 credits
  • Electromechanical Technology

    • Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		View Rates

    Industry Workplace Safety 10620172

  • 1.00 credits
  • Electromechanical Technology

    • Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		View Rates

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates

    Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

  • 1.00 credits
  • Fluid Power Technology

    • Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates

    Machine Control 1: Ladder Logic Fundamentals 10620151

  • 1.00 credits
  • Electromechanical Technology

    • Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates

    Machine Control 3: Sensors And Machine Safety 10620153

  • 1.00 credits
  • Electromechanical Technology

    • Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		View Rates

    Mechanical Systems 1: Basic Machine Components 10620157

  • 1.00 credits
  • Electromechanical Technology

    • Introduces how machines work and basic mechanical power transmission system components.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Mechanical Systems 2: Power Transmission Systems 10620158

  • 1.00 credits
  • Electromechanical Technology

    • Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		View Rates

    Industrial Motors 1: Electric Motors 10620159

  • 1.00 credits
  • Electromechanical Technology

    • Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		View Rates

    Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

  • 1.00 credits
  • Electromechanical Technology

    • Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		View Rates

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Safety 10442172

  • 1.00 credits
  • Welding

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Fabrication Techniques 1: International Weld Symbols 10442189

  • 1.00 credits
  • Welding

    • This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

  • 1.00 credits
  • Welding

    • This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Fabrication Techniques 3: Production Welding 10442191

  • 1.00 credits
  • Welding

    • Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    BLS (Basic Life Support) CPR 47531437

  • 0.10 credits
  • Emergency Medical Services
  • $40.00

    • This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD062 Fall
    Open
    09/18/2025
    		In-Person Phillips Campus
    Sep 18
    Thursday
    05:30 PM - 09:30 PM
    P162 - Classroom - Phillips Campus
    Andrea Lerch
    		$40.00
    #PD069 Fall
    Open
    11/13/2025
    		In-Person Phillips Campus
    Nov 13
    Thursday
    05:30 PM - 09:30 PM
    P162 - Classroom - Phillips Campus
    Kristie Hughes
    		$40.00

    Food Safety & Sanitation Certification 47303476

  • 0.30 credits
  • Foods
  • $109.00

    • This state approved course prepares you for the National Restaurant Association Certification examination from the Department of Health and Social Services by providing managers and employees in the food-service industry the knowledge of food-safety procedures. By taking this state approved course and passing the certification examination, you will be eligible to apply for your Certified Food Manager License from the Department of Health and Social Services. The National Restaurant Association certification examination is the third night of the course. Textbook required from the NTC Bookstore.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD005 Fall
    Open
    10/06/2025 –
    10/20/2025
    		In-Person Phillips Campus
    Oct 6 – Oct 20
    Monday
    08:30 AM - 12:30 PM
    P131 - Classroom - Phillips Campus
    Rich Neumann
    		$109.00

    Heartsaver First Aid/CPR/AED 47531475

  • 0.15 credits
  • Emergency Medical Services
  • $61.00

    • Heartsaver 1st Aid, CPR/AED training which includes adult, child and infant. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD028 Fall
    Open
    10/13/2025
    		In-Person Phillips Campus
    Oct 13
    Monday
    04:30 PM - 09:30 PM
    P162 - Classroom - Phillips Campus
    Andrea Lerch
    		$61.00

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Food Safety Recertification Refresher 47303477

  • 0.10 credits
  • Foods
  • $99.00

    • This course prepares students to successfully complete the ServSafe Manager exam with 2 hours of instructor led exam prep and completion of the standardized exam. The course will cover key concepts, regulations, and certification requirements. Note: Due to frequent changes in food safety regulations that are included on the exam, it is strongly recommended that students take the full certification course to ensure successful completion of the exam and license renewal.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD005 Fall
    Open
    10/20/2025
    		In-Person Phillips Campus
    Oct 20
    Monday
    08:30 AM - 12:30 PM
    P131 - Classroom - Phillips Campus
    Rich Neumann
    		$99.00

    Babysitting Certification 47531506

  • 0.20 credits
  • Emergency Medical Services
  • $71.00

    • This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD029 Fall
    Open
    10/25/2025
    		In-Person Phillips Campus
    Oct 25
    Saturday
    08:00 AM - 03:00 PM
    P162 - Classroom - Phillips Campus
    Andrea Lerch
    		$71.00