Candidate Physical Ability Test (CPAT) - Full Session 98FIREJ

The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.

Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

Kiln Drying 47465405

Kiln Drying includes: presentation on effective Kiln drying, 100 board run test, 40 board runs along with kiln drying techniques based on climate conditions.

Hardwood Log Scaling & Grading Workshop 47465407

In this hands-on workshop you will learn how to apply log scaling principles and grading criteria used by industry professionals to merchandise hardwood logs. Please note that this training will consist of both a classroom portion as well as instruction off-site at a local sawmill.

Fire Fighting Principles 10503142

Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

Fundamentals Of Furniture Manufacturing 10465119

This course is designed to provide the foundational knowledge and skills to manufacture furniture. Topics covered include: furniture design styles, sourcing raw material for projects, tool selection, machine operation, joinery and furniture construction.

Introduction to Forest Products 10465183

Explores the entire forest products supply-chain including sectors, current trends, career paths, and environments related to wood manufacturing. Establishes the importance of health and safety practices in the industry and introduces learners to various hazards they will encounter across industry, including sawmills, wood shops, and industrial settings. Learners will develop basic knowledge of OSHA, mills and shops in the forest products industry, and will have the opportunity to earn an NTC Forklift Operator Certificate.

Wood Species Identification 10465185

Identify wood species and develop knowledge on the applications for different woods.  Learners will explore these concepts via hands-on experience, and establish basic understanding of wood cell types, identification characteristics, and material features. 

Principles Of Emerg Svcs Safety & Survival 10503192

Introduces the basic principles and history related to the national firefighter life safety initiatives, focusing on the need for cultural and behavior change throughout the emergency services.

Building Construction For Fire Protection 10503143

Provides the components of building construction related to firefighter and life safety. The elements of construction and design of structures are shown to be key factors when inspecting buildings, preplanning fire operations, and operating at emergencies.

Certified Fire Fighter 1 47503720

This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.

Fire Apparatus Driver Operator - Aerial 47503747

This 36-hour course prepares the participant to be able to perform aerial fire apparatus driving, positioning, operating and testing functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the Fire Apparatus Driver/Operator- Pumper course. This course is designed to provide the Driver/Operator-Aerial candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1002, Standard for Fire Apparatus Driver/Operator Professional Qualifications, Chapters 4 and 6.

Advanced Firefighter Concepts 10503160

Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.

Firefighter II Certification 47503730

This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition. Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)

Intro To Kiln Drying 10465181

Introduces participants to the fundamentals of kiln drying lumber. The basics of determining moisture content, preparing samples and operating a dry kiln will be covered as well as an overview of different types of dry kiln equipment.

Sawmill Safety & Maintenance 10465184

Builds on the safety and sawmill knowledge from previous classes to provide learners with more in-depth working knowledge of sawmills and their related hazards. Examines the need for regular preventive and essential maintenance of equipment, tools, and blades, and the safety challenges related to each, including where maintenance fails. Prepares students to prevent injuries, fatalities and break-downs in a mill environment within a safe and secure dedicated learning facility.

Mill Operations Overview 10465186

Explores the hierarchy of the forest products industry structure as it relates to sawmill production facilities.  Learners will examine best practices and key performance indicators and apply these concepts in a live mill environment.  Topics that learners will focus on include lumber yield, grade proficiency, optimization of production flow, and downtime mitigation. 

Lumber Manufacturing: Sawing, Edging & Trimming 10465178

Explores the general overview of plant layout, machine centers, and different product flow in a lumber manufacturing setting.  Learners focus on the mix of species, and how these can be utilized in various product lines, and examine the processing of lumber through sawing, edging, and trimming manufacturing operations.

Intro to Hardwood Grading 10465179

Expands of the skills previously introduced through the use of more advanced standard grade classifications and methods.  Learners build additional experience in the grading of hardwood lumber and logs and enhance their merchandising knowledge and understanding with emphasis on hands-on exercises and techniques.

Rough Mill 10465187

Hardwood Lumber Grading And Merchandising 10465180

Expands of the skills previously introduced through the use of more advanced standard grade classifications and methods.  Learners build additional experience in the grading of hardwood lumber and logs and enhance their merchandising knowledge and understanding with emphasis on hands-on exercises and techniques.

CNC Router 1 10465188

Hazardous Materials Operations 10503203

Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

Hazardous Materials Operations 47503785

Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1001, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.

Fire Fighter II Practical Exam 98FIREB

Practical skills testing for Fire Fighter II state certification.

Fire Fighter 1 Practical Exam 98FIREA

Practical skills testing for Fire Fighter 1 state certification.