Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.
This course is designed to provide the apprentice with the concepts and techniques used in computer-aided design (CAD) and computer-aided manufacturing (CAM) as part of their related instruction.
This course introduces the apprentice to the basics of stamping and diemaking. Topics include the basic terminology, blanking, piercing, bending and related basic operations. In addition learners will discover the basics of the theory and background knowledge related of stamping and die making. This course was designed for related instruction for tool and die, stamping die and mold makers.
The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.
The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.
This 40 hour course prepares the participant to perform fire fighting supervisor/manager functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Officer 1 JPRs of NFPA 1021, Standard for Fire Fighter Professional Qualifications, Chapter 4, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer II Level. This course is designed to provide the Fire Officer II candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 5.
This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.
Introduces the learner to basic CNC Milling setup and operation. Learners begin the course understanding the control panel of a CNC Milling Machine, common tooling used in a CNC Milling Machine and program set-up sheets. From there, learners run existing programs and eventually make minor edits to produce parts to print specifications.
Introduces the learner to basic CNC Turning setup and operation. Learners begin the course understanding the control panel of a CNC Turning Machine, common tooling used in a CNC Turning Machine and program set-up sheets. From there, learners run existing programs and eventually make minor edits to produce parts to print specifications.
This course will acquaint the apprentice with the interpretation of engineering prints and other technical and manufacturing documentation. The primary focus of the course will be on that part of manufacturing most closely related to machining and tooling. Background information is provided relative to the process used to create and finish the product or piece part on the prints being examined.
This 40-hour course prepares the participant to perform fire instruction duties at a minimum nationally recognized level. (This course was formerly known as Fire Instructor I). This course is designed to provide the Emergency Services Instructor I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1041, Standard for Fire Service Instructor Professional Qualifications, Chapter 4.
Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.
This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition.
Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)
This course will acquaint the apprentice with the skills to interpret the geometric dimensions and tolerances found on engineering drawings and in other industrial documents. Instruction concentrates on interpreting symbols, identifying tolerance zones and determining ways to check parts for conformity to the specified geometric controls.
Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1010, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1010, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.
Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications
Introduces learners to the fundamentals of CNC milling setup and operation. The course focuses on basic familiarity with the CNC milling machine control panel, common tooling, and simple program setup sheets. Learners practice running existing programs and make very simple edits under guidance to produce parts that meet basic print specifications.
Apply and learn operation of mills, lathes, drilling, grinding and general metal fabrication. This course is designed to give the learner the theory and hands-on training leading to the ability to work safely in a shop. Individual part fabricating and precision measurement are covered.
Apply and learn the operation of mills, lathes, drilling, grinding and general machining practices. This course is designed to give the learner the theory and hands-on training leading to the ability to work in a Machine Tool Lab. Individual part fabricating and precision measurement are covered.
