Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.
Course compares different types of drive components. Apprentices will develop skills related to inspecting, troubleshooting, removing, selecting, and installing belt drive systems.
The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.
The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.
This 40 hour course prepares the participant to perform fire fighting supervisor/manager functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Officer 1 JPRs of NFPA 1021, Standard for Fire Fighter Professional Qualifications, Chapter 4, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer II Level. This course is designed to provide the Fire Officer II candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 5.
This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.
This 40-hour course prepares the participant to perform fire instruction duties at a minimum nationally recognized level. (This course was formerly known as Fire Instructor I). This course is designed to provide the Emergency Services Instructor I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1041, Standard for Fire Service Instructor Professional Qualifications, Chapter 4.
Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.
This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition.
Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)
Green Awareness for the MMMP Trades examines how green projects and sustainable manufacturing initiatives relate to energy efficiency, energy consumption, waste reduction, and changing work processes for the MMMP related trades. Priorities related to cost awareness, energy efficiency, predictive and preventative maintenance, new materials, bearing maintenance, and precision laser alignment are included in this course. Each competency can stand alone and be added to existing modules in the paid related instruction program, or the course can be delivered in its entirety as a new module in the curriculum. Estimated hours shown with each competency are intended to guide educators and employers with planning, and may be modified to meet local needs.
Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications
Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1010, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1010, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.
This course provides instruction to apprentices concerning many aspects of inspecting, servicing, and troubleshooting hydraulic systems and components. Apprentices will learn safety related issues and be taught proper safety procedures for working with hydraulic systems and components.
This course examines math and physics concepts as they relate to millwrights and machine maintenance. Apprentices will develop skills related to converting fractions to decimals; using both standard and metric systems; applying basic algebra to solving problems; computing area, volume, mass, and torque; using basic trigonometry; and using math charts, tables and references in support of common work processes.
Course examines drive transmission systems and their applications, including roller chains. Apprentices will develop skills inspecting power transmission systems and troubleshooting mechanical drive systems.
This course develops apprentice skills regarding metallurgic concepts. Apprentices will compare various metals and their applications, apply metallurgic techniques to work processes, test metals for hardness, and examine heat treating applications.
Apprentices will examine packing, seals and gaskets and compare materials and applications. Then skill in layout, cutting, inspecting, removing and installing these components will be developed.
This course was formerly the C-9 module for the MMMP apprenticeship. It provides instruction to apprentices concerning many aspects of inspecting, servicing, and troubleshooting pneumatic systems and components. Apprentices will learn safety related issues and be taught proper safety procedures for working with pneumatic systems and components.
This course develops apprentice skills in precision measurement. Types of measuring instruments will be compared and then measuring skills using tapes, steel rules, micrometers, calipers, indicators, and gauges will be developed.
Course examines both preventative and predictive maintenance concepts as they apply to millwright work processes and machine maintenance. Apprentices will develop skills related to assessing machine conditions and faults based on both preventative and predictive maintenance.
This course explores reading prints commonly used by millwrights and machine maintenance workers. Course competencies include comparing types of prints, interpreting structural drawings, identifying parts from prints, and develop apprentice sketching drawing skills.
Course compares different pump types and their applications. Apprentices will complete a field inspection of pumps and learn how to troubleshoot, remove, overhaul, install and perform preventative maintenance on pumps.
Apprentices will compare types of rigging equipment and their uses; determine safe loads, rig and crib loads, and move a load with cranes and hoists in this course.
Course introduces principles of vacuum systems and interpreting vacuum system schematics. Apprentices will then develop skills related to installing, repairing, replacing and applying troubleshooting principles to vacuum systems and components. Course examines preventative maintenance techniques commonly used on the job.
Course compares common welding processes and develops apprentice skills related to welding, cutting, heating and using oxy-gas. Welding with arc, MIG and TIG is included, along with common cutting and joining techniques.
