Program drive parameters for a drive application. This course will teach students how to create a custom parameter group based upon drive applications. Throughout this course, the instructor will cover a range of topics from establishing communications with a PowerFlex 525 drive via a USB connection and Ethernet/IP network to test parameters of a PowerFlex 525 drive and control a drive in STUDIO 5000.
Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.
Discover how generative AI tools and techniques can be used to produce images, music, video, and more. This introductory session explores creative media generation practices that support marketing, education, storytelling, and content development. Participants will gain hands-on experience using AI to create multimedia content, along with practical guidance on prompt strategies and output evaluation across different formats.
The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.
The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.
Focuses on integration of a complete automated manufacturing cell. Typical components include programmable controllers, robot, sensors, drives, conveyors, pneumatics, hard automation, control wiring and vision systems. Students plan, wire, program, troubleshoot and develop an automated manufacturing process based on the “product” chosen by the group. All required programming and documentation for the entire automation system is required
This 40 hour course prepares the participant to perform fire fighting supervisor/manager functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Officer 1 JPRs of NFPA 1021, Standard for Fire Fighter Professional Qualifications, Chapter 4, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer II Level. This course is designed to provide the Fire Officer II candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 5.
This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.
Focuses on the concept of programming and using vision guided robotic systems. Both remote hard mounted vision systems and robot mounted vision systems will be introduced. Learners will learn how to create vision programs and configure the robot to work with the camera system to allow storage and bin picking applications. Both 2D and 3D camera systems will be introduced.
Provides the learner the skills necessary to engineer and design a product manufacturing solution using SMART manufacturing equipment, concepts & simulation.
Explore the design and troubleshooting of Ethernet/IP networks. Topics introduce students to integrating Ethernet networking communications, architectures, protocols, and security. Students will learn through hands-on lab activities covering setting up communication systems, networking configurations, and troubleshooting techniques.
This 40-hour course prepares the participant to perform fire instruction duties at a minimum nationally recognized level. (This course was formerly known as Fire Instructor I). This course is designed to provide the Emergency Services Instructor I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1041, Standard for Fire Service Instructor Professional Qualifications, Chapter 4.
Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.
This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition.
Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)
Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1010, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1010, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.
Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications
Explores the fundamentals of Human Machine Interface (HMI) software and hardware. Students will learn about configuring communication with programmable controllers and project settings. Students will create and edit displays, browse tags and/or global objects and connections. Additional topics include trending, data logging, alarms, and animations.
Explores two main topic areas: PLC and HMI machine applications. The learner will demonstrate the ability to learn to program a PLC they have not worked with before as well as an HMI they have not worked with before. The learner will integrate the study of curriculum, technical manuals, help files and previous knowledge to demonstrate their ability to learn new technology. Learner will develop several PLC applications and several HMI applications integrated with the PLC.
Focuses on the interconnected systems utilized in industrial applications that can proactively communicate improvements in productivity and efficiency. Focus on configuring and Implementing smart sensors, gather configured data from PLC controllers to provide the ability for data collections will be studied. Other topics will include, identifying the correct hardware, installation and wiring, sensor configuration and control.
