Displaying 1 - 100 of 152 No filters currently applied.

Mechanical Hardware & Hand Tools For The Machine Trades Apprentices 50420715

  • 1.00 credits
  • Machine Shop

    • This course provides instruction for the apprentice in recognition, selection, and operation of mechanical hardware and hand tools. Apprentices are taught to use outside sources to select correct component or tool sizes, characteristics, and operating parameters. Apprentices will sharpen drills and single point cutting tools.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/19/2025 –
    12/09/2025
    		In-Person Wausau Main Campus
    Aug 19
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 2
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 16
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 30
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 14
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 28
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 11
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 25
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 9
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    		View Rates

    Metallurgy & Materials For Machine Trades Apprenticeship 50420721

  • 1.00 credits
  • Machine Shop

    • This course provides the opportunity for the apprentice to develop the knowledge, skills, process, and understanding of hardness testing, carbons and low alloy steel, tool steels, stainless steels, cast iron, aluminum and aluminum alloys, die cast alloys, copper and copper alloys, plastics, heat treating and nondestructive testing.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/19/2025 –
    12/09/2025
    		In-Person Wausau Main Campus
    Aug 19
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 2
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 16
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 30
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 14
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 28
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 11
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 25
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 9
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    		View Rates

    CNC Turning Machine Fundamentals 3 32420113

  • 2.00 credits
  • Machine Shop

    • Operate CNC turning Machines to cut outside and inside diameters using modern machining processes. Learners will also learn how to set-up, program, and run live tooling multi-axis turning centers utilizing axial and radial tooling.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/25/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 25 – Oct 16
    Thursday, Tuesday, Wednesday
    12:00 PM - 01:50 PM
    H102 - Classroom - H Building
    Jeff Block
    Aug 25 – Oct 16
    Monday, Tuesday, Wednesday, Thursday
    12:00 PM - 01:50 PM
    H110 - Machine Tool Lab - H Building
    Jeff Block
    Aug 25 – Oct 16
    Monday
    12:00 PM - 01:50 PM
    H122 - Trades Classroom - H Building
    Jeff Block
    		View Rates

    CNC Milling Machine Fundamentals 3 32420112

  • 3.00 credits
  • Machine Shop

    • Operate CNC Milling Machines in a production setting along with programming and setting up multi-axis milling machining centers. Learners will obtain knowledge on proper set-up of multiple vises in a production situation. Learners will also learn how to set-up, program, and run multi axis milling machines.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/25/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 25 – Oct 16
    Thursday, Tuesday, Wednesday
    09:00 AM - 11:50 AM
    H102 - Classroom - H Building
    Jeff Block
    Aug 25 – Oct 16
    Monday, Tuesday, Wednesday, Thursday
    09:00 AM - 11:50 AM
    H110 - Machine Tool Lab - H Building
    Jeff Block
    Aug 25 – Oct 16
    Monday
    09:00 AM - 11:50 AM
    H122 - Trades Classroom - H Building
    Jeff Block
    		View Rates

    Introduction To CAD/CAM 32420655

  • 1.00 credits
  • Machine Shop

    • Develop basic skills creating 2D and 3D geometry part models using Computer-Aided Design (CAD). Learners will then learn how to create CNC tool paths using Computer-Aided Machining (CAM). Learners will also learn file management by saving, converting, and working with different file types.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/25/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Aug 25 – Oct 15
    Monday, Wednesday
    07:00 AM - 08:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		View Rates

    Welding Safety 10442172

  • 1.00 credits
  • Welding

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/25/2025 –
    09/03/2025
    		In-Person Wausau Main Campus
    Aug 25 – Sep 3
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H136 - Welding Lab - H Building
    Veronica Hope
    Aug 25 – Sep 3
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		View Rates
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #02 Fall
    Open
    08/26/2025 –
    09/03/2025
    		In-Person Wausau Main Campus
    Aug 26 – Sep 3
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    Aug 26 – Sep 3
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H137 - Welding Lab - H Building
    Daniel Grabko
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/25/2025 –
    10/13/2025
    		In-Person Wausau Main Campus
    Aug 25 – Oct 13
    Monday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Aug 25 – Oct 13
    Monday
    01:00 PM - 03:50 PM
    H136 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #02 Fall
    Open
    08/28/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 28 – Oct 16
    Thursday
    07:00 AM - 09:50 AM
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 28 – Oct 16
    Thursday
    07:00 AM - 09:50 AM
    H122 - Trades Classroom - H Building
    Robert Leafblad
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

  • 1.00 credits
  • Welding

    • Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #82 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Oct 20 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Gas Metal Arc Welding 6: Sheet Metal 10442205

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Weld Print Reading 1: Basic Views And Dimensions 10442181

  • 1.00 credits
  • Welding

    • Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

    4 Course Sections
    4 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #01 Fall
    Open
    08/27/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Aug 27 – Oct 15
    Wednesday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Jesse Richardson
    		View Rates
    #02 Fall
    Open
    08/27/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Aug 27 – Oct 15
    Wednesday
    07:00 AM - 09:50 AM
    H122 - Trades Classroom - H Building
    Robert Leafblad
    		View Rates

    Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

  • 1.00 credits
  • Welding

    • Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #01 Fall
    Open
    09/17/2025 –
    09/29/2025
    		In-Person Wausau Main Campus
    Sep 17 – Sep 29
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Sep 17 – Sep 29
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #02 Fall
    Open
    09/17/2025 –
    09/25/2025
    		In-Person Wausau Main Campus
    Sep 17 – Sep 25
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H136 - Welding Lab - H Building
    Daniel Grabko
    Sep 17 – Sep 25
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

  • 1.00 credits
  • Welding

    • Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Metal Arc Welding 3: Spray Transfer 10442185

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    5 Course Sections
    5 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #01 Fall
    Open
    10/14/2025 –
    10/27/2025
    		In-Person Wausau Main Campus
    Oct 14 – Oct 27
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Oct 14 – Oct 27
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #02 Fall
    Open
    10/14/2025 –
    10/23/2025
    		In-Person Wausau Main Campus
    Oct 14 – Oct 23
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H136 - Welding Lab - H Building
    Daniel Grabko
    Oct 14 – Oct 23
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    5 Course Sections
    5 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #01 Fall
    Open
    09/30/2025 –
    10/13/2025
    		In-Person Wausau Main Campus
    Sep 30 – Oct 13
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Sep 30 – Oct 13
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #02 Fall
    Open
    09/30/2025 –
    10/09/2025
    		In-Person Wausau Main Campus
    Sep 30 – Oct 9
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H136 - Welding Lab - H Building
    Daniel Grabko
    Sep 30 – Oct 9
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Weld Print Reading 2: Other Views And Symbols 10442182

  • 1.00 credits
  • Welding

    • Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #90 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Oct 20 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #80 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Wausau Main Campus
    Aug 25 – Dec 17
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Aug 25 – Dec 17
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		View Rates
    #81 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Antigo Campus
    Aug 25 – Dec 17
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #03 Fall
    Open
    08/26/2025 –
    09/23/2025
    		In-Person Wausau Main Campus
    Aug 26 – Sep 23
    Tuesday, Wednesday
    07:00 AM - 08:50 AM
    H127 - Computer Lab - H Building
    Daniel Grabko
    Aug 26 – Sep 23
    Thursday
    07:00 AM - 08:50 AM
    H124 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates
    #02 Fall
    Open
    09/04/2025 –
    09/16/2025
    		In-Person Wausau Main Campus
    Sep 4 – Sep 16
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H137 - Welding Lab - H Building
    Daniel Grabko
    Sep 4 – Sep 16
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates
    #01 Fall
    Open
    09/08/2025 –
    09/16/2025
    		In-Person Wausau Main Campus
    Sep 8 – Sep 16
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Sep 8 – Sep 16
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H136 - Welding Lab - H Building
    Veronica Hope
    		View Rates

    Welding Fabrication Techniques 1: International Weld Symbols 10442189

  • 1.00 credits
  • Welding

    • This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

  • 1.00 credits
  • Welding

    • This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Fabrication Techniques 3: Production Welding 10442191

  • 1.00 credits
  • Welding

    • Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #82 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Open Labs Phillips Campus
    Aug 25 – Dec 17
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding For Apprentices 47442443

  • 1.00 credits
  • Welding
  • $209.95

    • This course highlights the similarities in equipment and technique between the major arc welding processes. Students complete introductory level competencies in the GMAW, SMAW, FCAW, and GTAW processes. Material preparation skills include shearing, sawing, grinding, and thermal cutting. This course is 40 hours for apprenticeship programs.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD003 Fall
    Open
    08/25/2025 –
    12/17/2025
    		In-Person Wausau Main Campus
    Aug 25 – Dec 17
    Monday, Tuesday, Wednesday
    12:00 PM - 08:00 PM
    Wausau Main Campus
    Robert Leafblad
    Aug 28 – Dec 11
    Thursday
    12:00 PM - 05:00 PM
    Wausau Main Campus
    Robert Leafblad
    		$209.95

    Print Reading For The Machine Trades 3 32420656

  • 1.00 credits
  • Machine Shop

    • Develop advanced proficiency in reading and interpreting working industrial drawings, including assembly prints and detail prints. Specialized part prints are covered including gears, fastener, springs, cams, plastic components and sheet metal type drawings.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/26/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 26 – Oct 16
    Thursday, Tuesday
    07:00 AM - 08:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		View Rates

    Welding Career Exploration 10442203

  • 1.00 credits
  • Welding

    • Develops awareness of career opportunities and career preparedness in the welding field. Employer presentations and plant tours clarify technical and success skill expectations in the trade. Learners assess their own passions and motivations to develop a career and plan. Digital portfolio development is introduced, along with professional media presence. Learners explore NTC career services, including resume development, job searches and mock interviews.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/26/2025 –
    10/14/2025
    		In-Person Wausau Main Campus
    Aug 26 – Oct 14
    Tuesday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Jesse Richardson
    		View Rates
    #02 Fall
    Open
    08/26/2025 –
    10/14/2025
    		In-Person Wausau Main Campus
    Aug 26 – Oct 14
    Tuesday
    07:00 AM - 09:50 AM
    H122 - Trades Classroom - H Building
    Robert Leafblad
    		View Rates

    Geometric Design And Tolerancing For Machine Trades Apprentice 50420727

  • 0.50 credits
  • Machine Shop

    • This course will acquaint the apprentice with the skills to interpret the geometric dimensions and tolerances found on engineering drawings and in other industrial documents. Instruction concentrates on interpreting symbols, identifying tolerance zones and determining ways to check parts for conformity to the specified geometric controls. Reference is made to ASME Y14.5M - 1994.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/26/2025 –
    10/07/2025
    		In-Person Wausau Main Campus
    Aug 26
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 9
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 23
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 7
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    		View Rates

    Basic CAD/CAM For Machine Trades Apprentice 50420725

  • 1.00 credits
  • Machine Shop

    • This course is designed to provide the apprentice with the concepts and techniques used in computer-aided design (CAD) and computer-aided manufacturing (CAM) as part of their related instruction.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/26/2025 –
    12/16/2025
    		In-Person Wausau Main Campus
    Aug 26
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 9
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 23
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 7
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 21
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 4
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 18
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 2
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 16
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    		View Rates

    Engineering Drawings For The Machine Trades Apprenticeships 50420714

  • 1.00 credits
  • Machine Shop

    • This course will acquaint the apprentice with the interpretation of engineering prints and other technical and manufacturing documentation. The primary focus of the course will be on that part of manufacturing most closely related to machining and tools. Background information is provided relative to the process used to create and finish the product or piece part on the prints being studied. This course was formerly module 4 in related instruction.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/27/2025 –
    12/17/2025
    		In-Person Wausau Main Campus
    Aug 27
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 10
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 24
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 8
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 22
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 5
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 19
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 3
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 17
    Wednesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    		View Rates

    Precision Measurement For The Machine Trades Apprentices 50420713

  • 1.00 credits
  • Machine Shop

    • This course is designed to acquaint the apprentice with the measurement systems and tools most frequently used in layout and machining processes. Learning outcomes relate to semi-precision through super-precision measuring tools and equipment combined with opportunities to investigate new technologies.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/27/2025 –
    12/17/2025
    		In-Person Wausau Main Campus
    Aug 27
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 10
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Sep 24
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 8
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Oct 22
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 5
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Nov 19
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 3
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Dec 17
    Wednesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    		View Rates

    Print Reading For The Machine Trades 1 32420122

  • 1.00 credits
  • Machine Shop

    • Develop basic proficiency in reading and interpreting machine tool prints. Learners will learn the communication process between designer and machinist.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/28/2025 –
    12/11/2025
    		In-Person Wausau Main Campus
    Aug 28 – Dec 11
    Thursday
    12:00 PM - 01:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Duane Yorde
    		View Rates

    Welding Laser Programming 10442142

  • 1.00 credits
  • Welding

    • Develops abilities in industrial laser programming. Learners will set up software defaults, customize menus, create geometry files, assign cut parameters, optimize processing and finally create part nests. Laser use in local fabrication shops will be explored.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/28/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 28 – Oct 16
    Thursday
    02:30 PM - 04:30 PM
    H127 - Computer Lab - H Building
    Veronica Hope
    		View Rates

    Welding Metal Forming 1 10442175

  • 1.00 credits
  • Welding

    • Applies principles of bending in metal fabrication. Learners select tools, calculate blank lengths, develop bend corrections and sequence bends. Learners perform bends in the manual mode and with software assist.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/28/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 28 – Oct 16
    Thursday
    11:30 AM - 02:30 PM
    H127 - Computer Lab - H Building
    Veronica Hope
    		View Rates

    Welding Laser Operations 10442145

  • 1.00 credits
  • Welding

    • Develops abilities in industrial laser operation. Learners will develop start-up procedures, perform pre-operation diagnostics, preserve safety in the laser work area and manage job files. Cut quality will be emphasized in relation to cut parameters, and assessed in accordance with common acceptance criteria.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    08/28/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Aug 28 – Oct 16
    Thursday
    07:00 AM - 11:30 AM
    H127 - Computer Lab - H Building
    Veronica Hope
    		View Rates

    Robotic Welding Applications 1 10442141

  • 2.00 credits
  • Welding

    • Develops fundamental skill in GMAW robotic programming. Learners create linear, circular, weaving and circular weaving programs and weld sequences in various joint types and positions. Weld parameters and quality, as well as repeatability will be emphasized.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    08/29/2025 –
    12/12/2025
    		In-Person Wausau Main Campus
    Aug 29 – Dec 12
    Friday
    07:00 AM - 11:30 AM
    H127 - Computer Lab - H Building
    Daniel Grabko
    Aug 29 – Dec 12
    Friday
    07:00 AM - 11:30 AM
    H136 - Welding Lab - H Building
    Daniel Grabko
    		View Rates

    Introduction To Machine Shop 10420131

  • 2.00 credits
  • Machine Shop

    • Apply and learn operation of mills, lathes, drilling, grinding and general metal fabrication. This course is designed to give the learner the theory and hands-on training leading to the ability to work safely in a shop. Individual part fabricating and precision measurement are covered.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03 Fall
    Open
    08/29/2025 –
    12/12/2025
    		In-Person Wausau Main Campus
    Aug 29 – Dec 12
    Friday
    12:00 PM - 03:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Joseph Bonke
    Aug 29 – Dec 12
    Friday
    12:00 PM - 03:50 PM
    H108 - Machine Tool Lab - H Building
    Joseph Bonke
    		View Rates

    Welding Pipe Fitting 1 31442303

  • 1.00 credits
  • Welding

    • Develops skills in Oxy-fuel cutting (OAC), Gas Metal Arc Welding (GMAW) and Shielded Metal Arc Welding (SMAW). Learners use OAC process to cut steel and the GMAW and SMAW process in 1F, 1G, 2F, 2G, 3F and 3G position on steel. Required welds include fillet and groove welds. Weld quality is assessed per AWS D1.1 Structural Steel Code. Preparing learners to weld Pipe in any position.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/24/2025 –
    10/29/2025
    		In-Person Wausau Main Campus
    Sep 24 – Oct 29
    Tuesday, Wednesday
    07:00 AM - 08:50 AM
    H127 - Computer Lab - H Building
    Daniel Grabko
    Sep 24 – Oct 29
    Thursday
    07:00 AM - 08:50 AM
    H124 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Machine Tool Processes 4 32420110

  • 2.00 credits
  • Machine Shop

    • Produce parts using intermediate applications of trade calculations and formulas. Emphasis will be placed on refined tolerances and using parts in assemblies.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/20/2025 –
    11/05/2025
    		In-Person Wausau Main Campus
    Oct 20 – Nov 5
    Thursday, Tuesday, Wednesday
    09:00 AM - 01:50 PM
    H102 - Classroom - H Building
    Jeff Block
    Oct 20 – Nov 5
    Monday, Tuesday, Wednesday, Thursday
    09:00 AM - 01:50 PM
    H110 - Machine Tool Lab - H Building
    Jeff Block
    Oct 20 – Nov 5
    Monday
    09:00 AM - 01:50 PM
    H122 - Trades Classroom - H Building
    Jeff Block
    		View Rates

    Machine Tool Cam Programming 32420352

  • 1.00 credits
  • Machine Shop

    • Applies PC-based integrative computer graphics systems used to create and convert computer-generated designs into tool paths for computer-controlled machine tools. Learners will be able to load and simulate these programs.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/20/2025 –
    12/17/2025
    		In-Person Wausau Main Campus
    Oct 20 – Dec 17
    Monday, Wednesday
    07:00 AM - 08:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		View Rates