Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.
The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.
The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.
This 40 hour course prepares the participant to perform fire fighting supervisor/manager functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Officer 1 JPRs of NFPA 1021, Standard for Fire Fighter Professional Qualifications, Chapter 4, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer II Level. This course is designed to provide the Fire Officer II candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 5.
This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.
Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.
This 40-hour course prepares the participant to perform fire instruction duties at a minimum nationally recognized level. (This course was formerly known as Fire Instructor I). This course is designed to provide the Emergency Services Instructor I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1041, Standard for Fire Service Instructor Professional Qualifications, Chapter 4.
Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.
This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition.
Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)
Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications
Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1010, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1010, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.
Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.
Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.
Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.
Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.
Apply advanced concepts involving digital electronics and electronic devices. Operational characteristics of advanced digital circuits will be explored and analyzed. Project based labs will allow learners to demonstrate an understanding of digital integrated circuits including combinational logic, counter circuits and storage circuits. IET 6 expands on IET 3 and IET 5.
Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.
