Displaying 801 - 900 of 981 No filters currently applied.

Machine Control 3: Sensors And Machine Safety 10620153

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Mechanical Systems 2: Power Transmission Systems 10620158

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79

    PLC 2: Timers, Counters And Program Control 10620165

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79

    Industrial Motors 1: Electric Motors 10620159

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79

    Machine Control 1: Ladder Logic Fundamentals 10620151

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79

    Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79

    Mechanical Systems 1: Basic Machine Components 10620157

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces how machines work and basic mechanical power transmission system components.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79

    Collaborative Robots And Vision 10664115

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Focuses on the concept of programming and using vision guided robotic systems. Both remote hard mounted vision systems and robot mounted vision systems will be introduced. Learners will learn how to create vision programs and configure the robot to work with the camera system to allow storage and bin picking applications. Both 2D and 3D camera systems will be introduced.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79

    Industrial Applications 10664103

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Explores two main topic areas: PLC and HMI machine applications. The learner will demonstrate the ability to learn to program a PLC they have not worked with before as well as an HMI they have not worked with before. The learner will integrate the study of curriculum, technical manuals, help files and previous knowledge to demonstrate their ability to learn new technology. Learner will develop several PLC applications and several HMI applications integrated with the PLC.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Ethernet IP 10664100

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Explore the design and troubleshooting of Ethernet/IP networks. Topics introduce students to integrating Ethernet networking communications, architectures, protocols, and security. Students will learn through hands-on lab activities covering setting up communication systems, networking configurations, and troubleshooting techniques.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Human Machine Interfacing 10664102

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Explores the fundamentals of Human Machine Interface (HMI) software and hardware. Students will learn about configuring communication with programmable controllers and project settings. Students will create and edit displays, browse tags and/or global objects and connections. Additional topics include trending, data logging, alarms, and animations.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Needs Analysis 10664104

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Introduces the concept of looking at a current outdated automation process or future automation process and understanding how to correctly specify the hardware components that will be used to update the machine or process with today’s automation technology. The concept of creating and writing a project proposal will also be covered.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$171.29
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29

    Remote Io For PLC Applications 10664109

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Learn what remote IO is and how to implement a POINT I/O system. The course will cover determining the quantity and type of I/O needed to test your system. This course will also show students how to calculate power requirements and decide whether an expansion power supply will be needed. Students will also add and configure an Ethernet adapter and I/O modules in a Studio 5000 Logix Designer project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Introduction To Safety PLC Programming 10664110

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Introduces the concept of setting up and programming various safety devices including GuardMaster Smart sensors, Programmable safety relays and safety PLC’s, The course will focus on how to setup, program and integrate safety components into your automation project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Scada Systems 1 10664106

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Organize and develop FactoryTalk View Site Edition (SE) applications. This course provides opportunities for learners to organize and develop FactoryTalk View SE applications. During class, learners will have the opportunity to practice the skills used to create/build graphic displays. Learners will learn how to configure alarms and security, trend data, and test their application using FactoryTalk View SE Client. Learners will also work with RSLinx Enterprise communications software

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Scada Systems 2 10664111

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Continuation of SCADA Systems 1, learners will organize and develop FactoryTalk View Site Edition (SE) network/server-based application. Learners will have the opportunity to practice the skills needed to create/build detailed graphic displays, trend charts and data logs. Learners will learn how to configure alarms and set up system security, build data logs, and test their application using FactoryTalk View SE Network Distributed Application.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Advanced Drive Applications 10664108

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Program drive parameters for a drive application. This course will teach students how to create a custom parameter group based upon drive applications. Throughout this course, the instructor will cover a range of topics from establishing communications with a PowerFlex 525 drive via a USB connection and Ethernet/IP network to test parameters of a PowerFlex 525 drive and control a drive in STUDIO 5000.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$200.04

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79

    Brakes 2 10602207

  • 2.00 credits
  • Autotec
  • $362.58

    • Explain design, construction and service of vehicle braking systems. Emphasis is placed on drum applications, power brake units, the machining of brake drum, the parking brake system.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$362.58

    Cooling System Maintenance 10602204

  • 1.00 credits
  • Autotec
  • $181.29

    • Introduces learners to cooling system preventative maintenance practices and procedures. Focusing on basic component identification, coolant leak detection procedures, coolant quality testing, and coolant exchange procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Underhood Maintenance 10602202

  • 1.00 credits
  • Autotec
  • $181.29

    • Perform vehicle preventative maintenance, and drivetrain maintenance procedures. Learners will focus on air filter, wiper blade, serpentine belt, headlamp, battery maintenance and repair.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Brakes 1 10602206

  • 2.00 credits
  • Autotec
  • $362.58

    • Explain design, construction and service of vehicle braking systems. Emphasis is placed on disc applications, the machining of brake rotors, hydraulic systems and components along with system maintenance. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$362.58

    Drivetrain Service 10602205

  • 2.00 credits
  • Autotec
  • $362.58

    • Introduction to drivetrain maintenance procedures. Learners will perform fluid exchange services for transmission, transfer case, and differential sytems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$362.58

    Tire Service 10602203

  • 1.00 credits
  • Autotec
  • $181.29

    • Prepares learners for fundamental tire repair procedures. Emphasis on mounting and balancing tires, service and repair of tire pressure monitoring systems (TPMS), basic tire leak detection methods and repairs, and basic suspension inspection procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Basic Vehicle Maintenance 10602201

  • 2.00 credits
  • Autotec
  • $362.58

    • Perform vehicle maintenance and repair. Focus will be on thread repair, oil change, tire rotations, and TPMS (Tire Pressure Monitor System) relearn procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$362.58

    Automotive Service Safety 10602200

  • 1.00 credits
  • Autotec
  • $181.29

    • Describe the automotive service facility. Safety, the use of basic hand and power tools, and hoist training helps the prospective automobile technician work safely and efficiently.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Weld Print Reading 1: Basic Views And Dimensions 10442181

  • 1.00 credits
  • Welding
  • $241.29

    • Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Weld Print Reading 2: Other Views And Symbols 10442182

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 3: Spray Transfer 10442185

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding
  • $241.29

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

  • 1.00 credits
  • Welding
  • $241.29

    • Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 6: Sheet Metal 10442205

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding
  • $241.29

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Mar 23 – May 21
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding
  • $241.29

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Welding Safety 10442172

  • 1.00 credits
  • Welding
  • $241.29

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding
  • $241.29

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding
  • $241.29

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		$241.29

    Industry Workplace Safety 10620172

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79

    PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$171.29