Fasteners For MMMP Trades (C-3) 50423712

Course provides apprentices with a chance to compare fasteners and their uses, analyze fastener failures, and install mechanical fasteners.

Finish Mill 10465191

Fire Apparatus Driver Operator - Aerial 47503747

This 36-hour course prepares the participant to be able to perform aerial fire apparatus driving, positioning, operating and testing functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the Fire Apparatus Driver/Operator- Pumper course. This course is designed to provide the Driver/Operator-Aerial candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1002, Standard for Fire Apparatus Driver/Operator Professional Qualifications, Chapters 4 and 6.

Fire Fighter 1 Practical Exam 98FIREA

Practical skills testing for Fire Fighter 1 state certification.

Fire Fighter II Practical Exam 98FIREB

Practical skills testing for Fire Fighter II state certification.

Fire Fighting Principles 10503142

Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

Fire Officer 1 Practical Exam 98FIRED

Practical skills testing for Fire Officer 1 state certification.

Firefighter II Certification 47503730

This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition. Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)

Fluid Power Systems 1: Fundamentals 10612120

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

Food Safety & Sanitation Certification 47303476

This state approved course prepares you for the National Restaurant Association Certification examination from the Department of Health and Social Services by providing managers and employees in the food-service industry the knowledge of food-safety procedures. By taking this state approved course and passing the certification examination, you will be eligible to apply for your Certified Food Manager License from the Department of Health and Social Services. The National Restaurant Association certification examination is the third night of the course. Textbook required from the NTC Bookstore.

Food Safety Recertification Refresher 47303477

This course prepares students to successfully complete the ServSafe Manager exam with 2 hours of instructor led exam prep and completion of the standardized exam. The course will cover key concepts, regulations, and certification requirements. Note: Due to frequent changes in food safety regulations that are included on the exam, it is strongly recommended that students take the full certification course to ensure successful completion of the exam and license renewal.

Foundations Of Case Management 10550202

Introduction to case management techniques and processes. Incorporates intake assessment techniques, service planning techniques, referral processes, coordination of care, and discharge processes determined by a multidisciplinary team approach. Includes client self-determination and autonomy. Incorporates clinical documentation requirements and processes.

Fundamentals Of Central Service 10512150

Introduces the learner to the knowledge and skills required of an entry level central service technician. Cleaning, decontamination, packaging, sterilization of instrumentation and equipment, as well as methods of process monitoring will be emphasized. Learners will also review medical terminology, anatomy, physiology and microbiology as it applies to Central Service. This course includes both lecture and lab experiences.

Fundamentals Of Electricity 10602209

Develop skills needed to understand todays automotive electrical and electronic systems. Learners will develop the principles of basic electrical units and circuits, apply ohm’s law while interpreting wiring diagrams, and be introduced to the use electrical test equipment. Focusing on basic circuit concepts they will analyze customers concerns, diagnose basic lighting electrical circuits, research repair information, and verify completed repairs.

Garde-Manger / Decorative Foods 10316108

Experience in sanitation, quality standards and methods of food storage. Learners will advance their knife skills as they cut, chop, carve and dice. Additionally, learners will be preparing and presenting cold foods such as soups, meats, cheeses and produce.

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 3: Spray Transfer 10442185

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

Gas Metal Arc Welding 6: Sheet Metal 10442205

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

Gas Tungsten Arc Welding 4: Aluminum 10442200

Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.