Evoc Instructor School 47504407

Candidate Physical Ability Test (CPAT) - Test Out 47503792

The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

Fire Fighter II Practical Exam 98FIREB

Practical skills testing for Fire Fighter II state certification.

Fire Fighter 1 Practical Exam 98FIREA

Practical skills testing for Fire Fighter 1 state certification.

Emergency Medical Technician - Part 2 30531302

Provides participants with the foundational knowledge and essential skills required to effectively respond to a wide range of medical emergencies and accidents. It is specifically designed to prepare students for state certification as Emergency Medical Technicians (EMTs) in Wisconsin, including successful preparation for the National Registry of Emergency Medical Technicians (NREMT) examinations. In addition to technical expertise, the course emphasizes the cultivation of professionalism, ethical conduct, and a steadfast dedication to safety within the field of emergency medical service. Graduates emerge well-equipped to meet the rigorous standards of both state and national certification. Pre/co-requisites: Current Healthcare Provider CPR or plans to obtain Healthcare Provider CPR in 30-531-301 Emergency Medical Responder/ Emergency Medical Technician - Part 1. - AND - Completion of 30-531-301 Emergency Medical Responder/ Emergency Medical Technician - Part 1 within one year of start date, - OR - currently enrolled in 30-531-301 Emergency Medical Responder/ Emergency Medical Technician - Part 1 - OR - or current State of WI Emergency Medical Responder License.

Emergency Medical Responder (EMR)/ Emergency Medical Technician (EMT) - Part 1 30531301

Provides participants with the foundational knowledge and essential skills required to effectively respond to a wide range of medical emergencies and accidents. It is specifically designed to prepare students for state certification as Emergency Medical Technicians (EMTs) in Wisconsin, including successful preparation for the National Registry of Emergency Medical Technicians (NREMT) examinations at the EMR Level. In addition to technical expertise, the course emphasizes the cultivation of professionalism, ethical conduct, and a steadfast dedication to safety within the field of emergency medical service. Graduates emerge well-equipped to meet the rigorous standards of both state and national certification as EMRs or as EMTs.

Fire Fighting Principles 10503142

Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

Certified Fire Fighter 1 47503720

This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.

Intro to Welding Camp 47862220

Students are invited to explore NTC's welding lab in this summer camp experience. NTC welding faculty will lead students through the skills and equipment needed for welding design. Participants will learn welding basics and create a project to take home.

Babysitting Certification 47531506

This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

Candidate Physical Ability Test (CPAT) - Full Session 98FIREJ

The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.

Class B CDL 2 10458107

Prepares the learner for the Class B Commercial Driver’s License (CDL) Exam using classroom and online resources to develop knowledge of non-driving aspects of operating Class B vehicles. Some of this content includes regulations, hours-of-service rules, driver wellness/fatigue, and medical requirements. In combination with the Class B CDL 1, the content of this course meets or exceeds the minimum federal training requirements for Entry Level Driver Training of a Class B commercial vehicle.

Firearms Instructor Training 47504806

This course prepares Wisconsin Law Enforcement Standards Board (LESB) certified law enforcement officers to effectively administer and teach the handgun and rifle training program.  This course emphasizes teaching and learning techniques that promote active learning, supports learners with a variety of learning preferences and needs, and generates continuous improvements.  This is a comprehensive instructor training on the justification for the use of deadly force, and the function, disassembly, troubleshooting, cleaning, maintenance, loading, unloading, reloading, malfunction clears, transition procedures in handgun and the modern police rifle.

BLS (Basic Life Support) CPR 47531437

This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

K9 Medical Emergency Care 47531491

This specialized course is designed for the emergency rescue personnel and K9 handler that would respond to canine emergencies in the field. This course includes practical classroom style education as well as hands-on instruction, demonstrations and scenario specific training using live, Trauma Fx simulator K9 Valor, model and cadaver dogs. This course will cover topics such as: Physical Examination and handling of the healthy and injured K9, Wound Care: facial lacerations, eye & paw injuries, Immobilization/Bandaging , Triage, shock, pain, heat stroke, CPR - RECOVER BLS & ALS /scenario drills, Introduction to Hemorrhage control, Oxygen administration, Naloxone administration, Major trauma overview, Illicit drug exposure in the working K9, Toxicology , Intubation (cadaver), Hemorrhage control, IV catheters and fluid resuscitation as well as intraosseous catheter placement (cadaver), Recognizing pneumothorax, needle decompression, and chest tube placement (cadaver), Gastric dilation volvulus (bloat) management in the field including trocarization (cadaver), and Review of First Aid kits and recommendation of supplies.

Truck Driving 1 10458100

Introduces learners to the laws, regulations and various certification levels of a Commercial Driver License (CDL). Introduces learners to the basic operation of a Class A Commercial Motor Vehicle.

Truck Driving 2 10458101

Prepares learners in the operation of commercial motor vehicles. Extensive hands-on training will be implemented throughout the course on tractor-trailers, giving the learner the skills needed to test for a Class A Commercial Driver License. Limited lecture will be used to inform students of industry regulations, driver safety, inspections and communication.

Truck Driving 3 10458102

Builds on skills learned in Truck Driving 1 and 2, as students hone skills and practice to test for a Class A Commercial Driver License. This course will focus on hands-on training in advanced driving operations, backing skills, weight distribution techniques, and trip planning.

BLS (Basic Life Support) CPR Refresher 47531438

This American Heart Association approved course is a refresher for those already meeting requirements for CPR as a Healthcare Provider. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

Hazardous Materials Operations 10503203

Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 3: Spray Transfer 10442185

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

PLC 2: Timers, Counters And Program Control 10620165

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

Industry Workplace Safety 10620172

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

Electrical Fabrication 10660118

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

Intro To Microcontrollers 10660121

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

Industrial Electronics Technology 4 - Electrical Systems 10660126

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

Fluid Power Systems 1: Fundamentals 10612120

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

Machine Control 1: Ladder Logic Fundamentals 10620151

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

Machine Control 2: Motor And Actuator Control 10620152

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

Machine Control 3: Sensors And Machine Safety 10620153

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

Electromechanical Troubleshooting 10620173

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

Mechanical Systems 1: Basic Machine Components 10620157

Introduces how machines work and basic mechanical power transmission system components.

Mechanical Systems 2: Power Transmission Systems 10620158

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

Industrial Motors 1: Electric Motors 10620159

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

Shielded Metal Arc Welding 1: E7018 10442192

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Shielded Metal Arc Welding 2: E6010, E7018 10442193

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

Gas Metal Arc Welding 6: Sheet Metal 10442205

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

Introduction To Welding 10442101

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

Weld Inspection & Testing 10442163

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

Welding Safety 10442172

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

Thermal Cutting 10442173

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

Weld Print Reading 1: Basic Views And Dimensions 10442181

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

Weld Print Reading 2: Other Views And Symbols 10442182

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Advanced Firefighter Concepts 10503160

Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.

Firefighter II Certification 47503730

This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition. Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)

Heartsaver First Aid/CPR/AED 47531475

Heartsaver 1st Aid, CPR/AED training which includes adult, child and infant. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.