Displaying 701 - 800 of 1047 No filters currently applied.

Introduction To Welding 10442101

  • 1.00 credits
  • Welding

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/08/2025 –
    09/16/2025
    		In-Person Wausau Main Campus
    Sep 8 – Sep 16
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Sep 8 – Sep 16
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H136 - Welding Lab - H Building
    Veronica Hope
    		View Rates

    Engine Diagnostics - Mechanical 10602218

  • 1.00 credits
  • Autotec

    • Perform engine mechanical diagnosis. Students will be performing compression testing, cyl leakage testing, and engine vacuum tests.  Students will also perform engine oil pressure tests and, test variable valve timing systems

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/08/2025 –
    09/15/2025
    		In-Person Wausau Main Campus
    Sep 8 – Sep 15
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		View Rates

    Basic Vehicle Maintenance 10602201

  • 2.00 credits
  • Autotec

    • Perform vehicle maintenance and repair. Focus will be on thread repair, oil change, tire rotations, and TPMS (Tire Pressure Monitor System) relearn procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/08/2025 –
    09/19/2025
    		In-Person Wausau Main Campus
    Sep 8 – Sep 19
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    		View Rates

    Nursing Assistant 30543300

  • 3.00 credits
  • Nursing

    • Prepares learners to perform basic nursing skills under the supervision of a nurse for job entry as a certified nursing assistant (CNA) or a home health aide (HHA) in health care agencies. Face-to-face and hybrid classroom, campus lab and clinical instruction are offered at various nursing homes and hospitals throughout the district. Students need to submit an application and complete background check.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #17 Fall
    Open
    09/09/2025 –
    11/14/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 9 – Sep 17
    Tuesday, Wednesday
    04:00 PM - 10:00 PM
    2024 - CNA Lab - Center for Health Sciences (CHS)
    Kelly Sinkler
    Sep 26 – Oct 3
    Friday
    04:00 PM - 10:00 PM
    2024 - CNA Lab - Center for Health Sciences (CHS)
    Kelly Sinkler
    Oct 7 – Oct 8
    Tuesday, Wednesday
    04:00 PM - 10:00 PM
    2024 - CNA Lab - Center for Health Sciences (CHS)
    Kelly Sinkler
    Oct 17 – Nov 7
    Friday, Tuesday, Wednesday
    04:00 PM - 09:30 PM
    Wausau Off Campus
    Kelly Sinkler
    Nov 14
    Friday
    04:00 PM - 10:00 PM
    2024 - CNA Lab - Center for Health Sciences (CHS)
    Kelly Sinkler
    		View Rates
    #10 Fall
    Open
    09/22/2025 –
    11/03/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 22 – Oct 16
    Thursday, Monday
    09:00 AM - 03:00 PM
    2046 - CNA Lab - Center for Health Sciences (CHS)
    Candace Hinz
    Oct 20 – Oct 30
    Thursday, Monday
    07:00 AM - 03:00 PM
    Wausau Off Campus
    Candace Hinz
    Nov 3
    Monday
    09:00 AM - 03:00 PM
    2046 - CNA Lab - Center for Health Sciences (CHS)
    Candace Hinz
    		View Rates
    #15 Fall
    Open
    09/26/2025 –
    12/12/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 26 – Nov 14
    Friday
    09:00 AM - 03:00 PM
    2046 - CNA Lab - Center for Health Sciences (CHS)
    Ashley Glodowski
    Nov 21 – Dec 5
    Friday, Monday
    07:00 AM - 03:00 PM
    Wausau Off Campus
    Ashley Glodowski
    Dec 12
    Friday
    09:00 AM - 03:00 PM
    2046 - CNA Lab - Center for Health Sciences (CHS)
    Ashley Glodowski
    		View Rates
    #18 Fall
    Open
    09/30/2025 –
    11/18/2025
    		In-Person Antigo Off Campus Antigo Campus
    Sep 30 – Oct 23
    Thursday, Tuesday
    04:00 PM - 10:00 PM
    T102 - CNA Lab/Classroom - Antigo Campus
    Darlaen Jansen
    Oct 28 – Nov 13
    Thursday, Tuesday
    04:00 PM - 09:30 PM
    Antigo Off Campus
    Darlaen Jansen
    Nov 18
    Tuesday
    04:00 PM - 10:00 PM
    T102 - CNA Lab/Classroom - Antigo Campus
    Darlaen Jansen
    		View Rates
    #11 Fall
    Open
    10/07/2025 –
    12/02/2025
    		In-Person Medford Off Campus Medford Campus
    Oct 7 – Nov 4
    Thursday, Tuesday
    04:00 PM - 10:00 PM
    M135 - Nursing Lab - Medford Campus
    Karen Simington
    Nov 6 – Nov 25
    Thursday, Tuesday
    04:00 PM - 09:30 PM
    Medford Off Campus
    Karen Simington
    Dec 2
    Tuesday
    04:00 PM - 10:00 PM
    M135 - Nursing Lab - Medford Campus
    Karen Simington
    		View Rates
    #12 Fall
    Open
    10/07/2025 –
    12/02/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Oct 7 – Nov 4
    Thursday, Tuesday
    04:00 PM - 10:00 PM
    2054 - CNA Lab - Center for Health Sciences (CHS)
    Ashley Glodowski
    Nov 6 – Nov 25
    Thursday, Tuesday
    04:00 PM - 09:30 PM
    Wausau Off Campus
    Ashley Glodowski
    Dec 2
    Tuesday
    04:00 PM - 10:00 PM
    2054 - CNA Lab - Center for Health Sciences (CHS)
    Ashley Glodowski
    		View Rates

    First Time Supervisor 47196569

  • 0.20 credits
  • Supervision & Leadership Dev
  • $129.00

    • This course is designed for newly promoted leaders to explore their leadership style and advance their skills. In this course participants will use a leadership assessment tool to better understand their strengths, discuss different communication styles, and evaluation dysfunctions and conflict modes.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD003 Fall
    Open
    09/09/2025
    		In-Person Antigo Campus
    Sep 9
    Tuesday
    08:00 AM - 05:00 PM
    T103 - Classroom - Antigo Campus
    Kenneth Cerney
    		$129.00

    Radiography Clinical 1 10526168

  • 2.00 credits
  • Radiologic Technology

    • This beginning level clinical course prepares radiography students to perform radiologic procedures on patients with extensive supervision and direction. Students apply radiation protection and standard precautions in the production of radiographic images while adhering to legal and ethical guidelines. An emphasis of the course is the development of communication and critical thinking skills appropriate to the clinical setting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/11/2025 –
    12/04/2025
    		In-Person Wausau Off Campus
    Sep 11 – Dec 4
    Thursday, Tuesday
    08:00 AM - 04:30 PM
    Wausau Off Campus
    Amy Stephens
    		View Rates

    BLS (Basic Life Support) CPR 47531437

  • 0.10 credits
  • Emergency Medical Services
  • $40.00

    • This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    5 Course Sections
    5 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD061 Fall
    Open
    09/11/2025
    		In-Person Wausau Main Campus
    Sep 11
    Thursday
    05:30 PM - 09:30 PM
    A162 - CPR Classroom - A Building
    Andrea Hebert
    		$40.00
    #PD062 Fall
    Open
    09/18/2025
    		In-Person Phillips Campus
    Sep 18
    Thursday
    05:30 PM - 09:30 PM
    P162 - Classroom - Phillips Campus
    Andrea Lerch
    		$40.00
    #PD063 Fall
    Open
    09/24/2025
    		In-Person Medford Campus
    Sep 24
    Wednesday
    05:30 PM - 09:30 PM
    M125B - Classroom - Medford Campus
    Michael Jankowski
    		$40.00
    #PD064 Fall
    Open
    10/06/2025
    		In-Person Antigo Campus
    Oct 6
    Monday
    05:30 PM - 09:30 PM
    T103 - Classroom - Antigo Campus
    Linda Vollmar
    		$40.00
    #PD065 Fall
    Open
    10/09/2025
    		In-Person Wausau Main Campus
    Oct 9
    Thursday
    05:30 PM - 09:30 PM
    A162 - CPR Classroom - A Building
    Kyle Borchardt
    		$40.00

    Pumps For The MMMP Trades (M-3) 50423732

  • 0.75 credits
  • Millwright

    • Course compares different pump types and their applications. Apprentices will complete a field inspection of pumps and learn how to troubleshoot, remove, overhaul, install and perform preventative maintenance on pumps.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/16/2025 –
    09/30/2025
    		In-Person Wausau Main Campus
    Sep 16
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Sep 23
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Sep 30
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		View Rates

    Engine Sensors 10602219

  • 2.00 credits
  • Autotec

    • Diagnose engine sensors that feed data to an on-board computers. You will learn how the computer processes and then uses data to make a host of real time decisions concerning ignition, fuel delivery and emission controls. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/16/2025 –
    09/30/2025
    		In-Person Wausau Main Campus
    Sep 16 – Sep 30
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		View Rates

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/17/2025 –
    09/29/2025
    		In-Person Wausau Main Campus
    Sep 17 – Sep 29
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Sep 17 – Sep 29
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #02 Fall
    Open
    09/17/2025 –
    09/25/2025
    		In-Person Wausau Main Campus
    Sep 17 – Sep 25
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H136 - Welding Lab - H Building
    Daniel Grabko
    Sep 17 – Sep 25
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Welding For MMMP Trades (C-6) 50423715

  • 0.75 credits
  • Millwright

    • Course compares common welding processes and develops apprentice skills related to welding, cutting, heating and using oxy-gas. Welding with arc, MIG and TIG is included, along with common cutting and joining techniques.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/17/2025 –
    10/01/2025
    		In-Person Wausau Main Campus
    Sep 17
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Sep 24
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Oct 1
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		View Rates

    EFDA Dental Procedures 10508121

  • 3.00 credits
  • Dental

    • Learn how to perform the placement and finishing of restorative materials after the dentist prepares a tooth for restoration. Includes the application of sealants and temporizations.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    09/18/2025 –
    11/07/2025
    		In-Person Wausau Main Campus
    Sep 18 – Nov 7
    Friday
    08:00 AM - 04:00 PM
    1002 - Dental Classroom - Center for Health Sciences (CHS)
    Susan Pernsteiner
    Sep 18 – Nov 7
    Thursday
    05:30 PM - 08:30 PM
    1002 - Dental Classroom - Center for Health Sciences (CHS)
    Susan Pernsteiner
    		View Rates

    AI 101 for Marketing Professionals 47104431

  • 0.10 credits
  • Marketing Business-to-business
  • $109.00

    • Step into the world of AI and learn how to unlock its potential for marketing in this introductory, hands-on workshop. Designed specifically for marketing professionals with little to no prior experience in AI, this course covers essential concepts including the art of prompting, content creation, and exploration of how to simplify your work. Through real-world examples and interactive sessions, you'll learn to navigate AI confidently and discover actionable ways to enhance your marketing strategies.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Fall
    Open
    09/18/2025
    		In-Person Wausau Main Campus
    Sep 18
    Thursday
    09:00 AM - 12:00 PM
    A165 - WTPD Innovation Classroom A - A Building
    Amy Gajewski
    		$109.00

    Nursing Intermediate Clinical Practice 10543111

  • 3.00 credits
  • Nursing

    • This intermediate level clinical course develops the RN role when working with clients with complex health care needs. A focus of the course is developing skills needed for managing multiple clients across the lifespan and priorities. Using the nursing process, students will gain experience in adapting nursing practice to meet the needs of clients with diverse needs and backgrounds.

    6 Course Sections
    6 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Closed
    09/19/2025 –
    12/05/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 19
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Michelle Knaup
    Sep 25 – Nov 18
    Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 03:00 PM
    Wausau Main Campus
    Michelle Knaup
    Oct 2 – Nov 7
    Thursday, Friday
    06:00 AM - 03:30 PM
    Wausau Off Campus
    Michelle Knaup
    Dec 5
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Michelle Knaup
    		View Rates
    #03 Fall
    Closed
    09/19/2025 –
    12/05/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 19
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Shana Klesmith
    Sep 24 – Nov 19
    Thursday, Friday, Wednesday
    08:00 AM - 03:00 PM
    Wausau Main Campus
    Shana Klesmith
    Oct 2 – Nov 6
    Thursday, Friday
    06:00 AM - 03:30 PM
    Wausau Off Campus
    Shana Klesmith
    Dec 5
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Shana Klesmith
    		View Rates
    #04 Fall
    Open
    09/19/2025 –
    12/05/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 19
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Valerie Palarski
    Sep 24 – Nov 25
    Thursday, Tuesday, Wednesday
    08:00 AM - 03:00 PM
    Wausau Main Campus
    Valerie Palarski
    Oct 1 – Nov 11
    Tuesday, Wednesday
    06:00 AM - 03:30 PM
    Wausau Off Campus
    Valerie Palarski
    Dec 5
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Valerie Palarski
    		View Rates
    #05 Fall
    Closed
    09/19/2025 –
    12/05/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 19
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Kate Seefeldt
    Sep 24 – Nov 25
    Thursday, Tuesday, Wednesday
    08:00 AM - 03:00 PM
    Wausau Main Campus
    Kate Seefeldt
    Oct 1 – Nov 11
    Tuesday, Wednesday
    06:00 AM - 03:30 PM
    Wausau Off Campus
    Kate Seefeldt
    Dec 5
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Kate Seefeldt
    		View Rates
    #06 Fall
    Open
    09/19/2025 –
    12/10/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 19
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Lana Jurek
    Sep 24 – Oct 31
    Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 03:00 PM
    Wausau Main Campus
    Lana Jurek
    Nov 4 – Dec 10
    Tuesday, Wednesday
    06:00 AM - 11:30 PM
    Wausau Off Campus
    Lana Jurek
    Dec 5
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Lana Jurek
    		View Rates
    #07 Fall
    Open
    09/19/2025 –
    12/10/2025
    		In-Person Wausau Main Campus Wausau Off Campus
    Sep 19
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Rebecca Haskins
    Sep 25 – Oct 31
    Thursday, Friday
    08:00 AM - 03:00 PM
    Wausau Main Campus
    Rebecca Haskins
    Nov 4 – Dec 10
    Tuesday, Wednesday
    06:00 AM - 03:30 PM
    Wausau Off Campus
    Rebecca Haskins
    Dec 5
    Friday
    08:00 AM - 04:30 PM
    Wausau Main Campus
    Rebecca Haskins
    		View Rates

    Transition To Trainer: Your Role As A Journey Worker 47455455

  • 0.20 credits
  • Supervision Management
  • $99.00

    • In this workshop you will be introduced to a new set of basic tools - the tools of a job site trainer. You will explore the skills that are necessary to be an effective trainer, discover how to deliver hands-on training, and examine the process for giving useful feedback.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Fall
    Open
    09/19/2025
    		In-Person Wausau Main Campus
    Sep 19
    Friday
    08:00 AM - 04:00 PM
    A168 - WTPD Visionary Classroom B - A Building
    Joseph Dziedzic
    		$99.00

    Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

  • 0.00 credits
  • Fire Technology
  • $160.00

    • The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS008 Fall
    Open
    09/19/2025
    		In-Person Public Safety Center of Excellence
    Sep 19
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00
    #PS009 Fall
    Open
    10/03/2025
    		In-Person Public Safety Center of Excellence
    Oct 3
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    Bryson Cruise
    		$160.00

    Candidate Physical Ability Test (CPAT) - Full Session 98FIREJ

  • 0.00 credits
  • Fire Technology

    • The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS008 Fall
    Open
    09/19/2025 –
    11/14/2025
    		In-Person Public Safety Center of Excellence
    Sep 19 – Nov 14
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates
    #PS009 Fall
    Open
    10/03/2025 –
    12/05/2025
    		In-Person Public Safety Center of Excellence
    Oct 3 – Nov 14
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    Dec 5
    Friday
    09:00 AM - 03:00 PM
    Public Safety Center of Excellence
    Bryson Cruise
    		View Rates

    Basic Rider Course 42816401

  • 0.30 credits
  • Motorcycle
  • $204.44

    • This Basic Motorcycle Rider course consists of classroom and range instruction designed for beginning riders and was developed by the Motorcycle Safety Foundation (MSF). The Basic Rider Course covers preparing to ride, turning, shifting and braking, street strategies, special situations, increasing riding skills, maintenance and insurance. Instructors are certified by the MSF and Wisconsin Department of Transportation (WisDOT). It is taught off-street, out of traffic, and motorcycles and helmets are provided. In addition there is a 5 hour ECourse that must be completed within 30 days prior to class(fees for ECourse are included in the overall class price). 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD010 Fall
    Open
    09/20/2025 –
    09/21/2025
    		In-Person Wausau Main Campus
    Sep 20 – Sep 21
    Sunday, Saturday
    08:00 AM - 02:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Robert Milton
    Sep 20 – Sep 21
    Sunday, Saturday
    08:00 AM - 02:30 PM
    Lot A - Wausau Main Campus
    Robert Milton
    		$204.44

    Heartsaver First Aid/CPR/AED 47531475

  • 0.15 credits
  • Emergency Medical Services
  • $61.00

    • Heartsaver 1st Aid, CPR/AED training which includes adult, child and infant. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    4 Course Sections
    4 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD025 Fall
    Open
    09/20/2025
    		In-Person Antigo Campus
    Sep 20
    Saturday
    08:00 AM - 01:00 PM
    T103 - Classroom - Antigo Campus
    Diane McKinney
    		$61.00
    #PD026 Fall
    Open
    09/27/2025
    		In-Person Wausau Main Campus
    Sep 27
    Saturday
    08:00 AM - 01:00 PM
    A162 - CPR Classroom - A Building
    Kyle Borchardt
    		$61.00
    #PD027 Fall
    Open
    10/11/2025
    		In-Person Medford Campus
    Oct 11
    Saturday
    08:00 AM - 01:00 PM
    M125B - Classroom - Medford Campus
    Jody Geiger
    		$61.00
    #PD028 Fall
    Open
    10/13/2025
    		In-Person Phillips Campus
    Oct 13
    Monday
    04:30 PM - 09:30 PM
    P162 - Classroom - Phillips Campus
    Andrea Lerch
    		$61.00

    Babysitting Certification 47531506

  • 0.20 credits
  • Emergency Medical Services
  • $71.00

    • This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD026 Fall
    Open
    09/20/2025
    		In-Person Public Safety Center of Excellence
    Sep 20
    Saturday
    08:00 AM - 03:00 PM
    PS110 - Command Center Classroom - Public Safety Center of Excellence
    Andrea Lerch
    		$71.00
    #PD027 Fall
    Open
    10/11/2025
    		In-Person Spencer Campus
    Oct 11
    Saturday
    08:00 AM - 03:00 PM
    S115 - Classroom - Spencer Campus
    Paige Thoune
    		$71.00

    Robotic Applications 1: Fundamentals Of Robotic Control 10620154

  • 1.00 credits
  • Electromechanical Technology

    • Introduces a basic understanding of a robot system. Topics studied include robot safety, controls and basic programming. The students will learn robotic program development.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I112 - Classroom - I Building
    Matt Jacobson
    Sep 22 – Oct 15
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I104B - AME Lab - I Building
    Matt Jacobson
    		View Rates

    PLC 5: Industrial Networking 10620168

  • 1.00 credits
  • Electromechanical Technology

    • Introduces PLC networking and data base collection. Learners will explore effective network communication schemes between PLC system components. Machine and process control systems require that programmable controllers be interconnected, so that data can be passed among them easily to accomplish the control task. Learners will explore these PLC Network communications through real world examples

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    02:00 PM - 04:50 PM
    I110 - Classroom - I Building
    Dustin Van De Weerd
    Sep 22 – Oct 15
    Monday, Wednesday
    02:00 PM - 04:50 PM
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		View Rates

    Diesel Emission Systems 10412113

  • 2.00 credits
  • Combustion Engines

    • Instructs learners on the latest technologies employed in heavy diesel emission reduction systems. Covers diesel emission regulations, emission reduction theory, diesel emission contributions to air quality and ethics pertaining to diesel emission system repairs. Learners will troubleshoot and repair exhaust gas recirculation systems, diesel particulate containment systems and Tier 4 exhaust aftertreatment technologies.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/10/2025
    		In-Person Agriculture Center of Excellence
    Sep 22 – Oct 10
    Monday, Tuesday, Wednesday, Friday
    07:30 AM - 12:00 PM
    DESL100 - Diesel Classroom - Agriculture Center of Excellence
    Andrew Borski
    		View Rates

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    12:00 PM - 02:50 PM
    I110 - Classroom - I Building
    Benjamin Effa
    Sep 22 – Oct 15
    Monday, Wednesday
    12:00 PM - 02:50 PM
    I104B - AME Lab - I Building
    Benjamin Effa
    		View Rates

    Tire Service 10602203

  • 1.00 credits
  • Autotec

    • Prepares learners for fundamental tire repair procedures. Emphasis on mounting and balancing tires, service and repair of tire pressure monitoring systems (TPMS), basic tire leak detection methods and repairs, and basic suspension inspection procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    09/30/2025
    		In-Person Wausau Main Campus
    Sep 22 – Sep 30
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    		View Rates

    Remote Io For PLC Applications 10664109

  • 1.00 credits
  • Automation Systems Technology

    • Learn what remote IO is and how to implement a POINT I/O system. The course will cover determining the quantity and type of I/O needed to test your system. This course will also show students how to calculate power requirements and decide whether an expansion power supply will be needed. Students will also add and configure an Ethernet adapter and I/O modules in a Studio 5000 Logix Designer project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    11:00 AM - 01:50 PM
    H129 - Classroom - H Building
    Matt Jacobson
    Sep 22 – Oct 15
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I104B - AME Lab - I Building
    Matt Jacobson
    		View Rates

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    11:00 AM - 01:50 PM
    H146B - Mechatronics Project Lab - H Building
    Benjamin Knospe
    Sep 22 – Oct 15
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I112 - Classroom - I Building
    Benjamin Knospe
    		View Rates

    Heavy Duty Suspension & Steering 1 10412126

  • 1.00 credits
  • Combustion Engines

    • Introduces fastener identification and torque as it relates to equipment repairs. In the lab setting, proper torque techniques and concerns are discussed and practiced.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    09/26/2025
    		In-Person Agriculture Center of Excellence
    Sep 22 – Sep 26
    Monday, Tuesday, Wednesday, Thursday, Friday
    12:30 PM - 05:00 PM
    DESL100 - Diesel Classroom - Agriculture Center of Excellence
    James Eckardt
    		View Rates

    Mental Health & Community Concepts 10543110

  • 2.00 credits
  • Nursing

    • This course will cover topics related to the delivery of community and mental health care. Specific health needs of individuals, families, and groups will be addressed across the lifespan. Attention will be given to diverse and at-risk populations. Mental health concepts will concentrate on adaptive/maladaptive behaviors and specific mental health disorders. Community resources will be examined in relation to specific types of support offered to racial, ethnic, economically diverse individuals and groups.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    12/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Dec 15
    Monday
    02:00 PM - 05:00 PM
    3016 - Classroom - Center for Health Sciences (CHS)
    Michelle Knaup
    		View Rates

    Simulation And Ai 10664117

  • 1.00 credits
  • Automation Systems Technology

    • Explores the Artificial Intelligence available in the world today and discusses how it has helped. We will look at modern A.I. (cell phones, televisions, internet companies, automotive applications and others) to see how it is already a part of everyday life. Autonomous robots will be controlled and reviewed to discover their capabilities. We will then utilize Oculus technology to review training options (fire extinguisher training, Lockout/tagout training). Microsoft Halolens units will be used to create mixed reality scenarios for class work and possible workplace training integration. 3D modeling will be used to develop simulations that will allow students to experience work that might not be conducive to our lab or too dangerous for us to do in the lab setting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    12:00 PM - 02:50 PM
    Wausau Main Campus
    Bryan Schroder
    		View Rates

    Intro To Interviewing & Counseling Skills 10550206

  • 3.00 credits
  • Substance Use Disorder Counseling

    • Analyze foundational skills in the counseling relationship. Analyze the stages of the helping processes and the roles professionals play in the processes. Analyze the importance of establishing therapeutic relationships. Apply basic counseling techniques. Apply interviewing and counseling skills through mock counseling sessions and personal experience reflections. Examine issues of boundaries and ethics.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/22/2025 –
    12/16/2025
    		In-Person Zoom Available Wausau Main Campus
    Sep 22 – Dec 16
    Tuesday
    08:00 AM - 12:30 PM
    A224 - Classroom - A Building
    Tracy Vaughan
    Sep 22 – Dec 16
    Tuesday
    08:00 AM - 12:30 PM
    A227 - Classroom - A Building
    Tracy Vaughan
    		View Rates

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03 Fall
    Open
    09/22/2025 –
    10/15/2025
    		In-Person Wausau Main Campus
    Sep 22 – Oct 15
    Monday, Wednesday
    08:00 AM - 10:50 AM
    H147 - Pneumatic/Fluid Power lab - H Building
    Benjamin Knospe
    Sep 22 – Oct 15
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I110 - Classroom - I Building
    Benjamin Knospe
    		View Rates
    #05 Fall
    Open
    09/25/2025 –
    10/23/2025
    		In-Person Wausau Main Campus
    Sep 25 – Oct 23
    Thursday
    07:30 AM - 12:00 PM
    H147 - Pneumatic/Fluid Power lab - H Building
    Andrew Borski
    		View Rates

    Servo Systems 2: Motion Control Systems 10620162

  • 1.00 credits
  • Electromechanical Technology

    • Introduces the principles of motion control. Multi-axis CNC machines are operated using G-Code programming and CAM software. Servo motors, stepper motors and feedback devices are studied using hands on lab activities.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Sep 23 – Oct 16
    Thursday, Tuesday
    10:00 AM - 12:50 PM
    H129 - Classroom - H Building
    Matt Jacobson
    Sep 23 – Oct 16
    Thursday, Tuesday
    10:00 AM - 12:50 PM
    I104B - AME Lab - I Building
    Matt Jacobson
    		View Rates

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Sep 23 – Oct 16
    Thursday, Tuesday
    10:00 AM - 12:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    Sep 23 – Oct 16
    Thursday, Tuesday
    10:00 AM - 12:50 PM
    I104A - AME Lab - I Building
    Bryan Schroder
    		View Rates

    Industrial Internet Of Things 10664113

  • 1.00 credits
  • Automation Systems Technology

    • Focuses on the interconnected systems utilized in industrial applications that can proactively communicate improvements in productivity and efficiency. Focus on configuring and Implementing smart sensors, gather configured data from PLC controllers to provide the ability for data collections will be studied. Other topics will include, identifying the correct hardware, installation and wiring, sensor configuration and control.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Sep 23 – Oct 16
    Thursday, Tuesday
    08:30 AM - 11:20 AM
    H129 - Classroom - H Building
    Dustin Van De Weerd
    Sep 23 – Oct 16
    Thursday, Tuesday
    08:30 AM - 11:20 AM
    H146B - Mechatronics Project Lab - H Building
    Dustin Van De Weerd
    		View Rates

    Advanced Firefighter Concepts 10503160

  • 2.00 credits
  • Fire Technology

    • Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    12/02/2025
    		In-Person Public Safety Center of Excellence
    Sep 23 – Dec 2
    Tuesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    Kyle Lech
    		View Rates

    Introduction To Safety PLC Programming 10664110

  • 1.00 credits
  • Automation Systems Technology

    • Introduces the concept of setting up and programming various safety devices including GuardMaster Smart sensors, Programmable safety relays and safety PLC’s, The course will focus on how to setup, program and integrate safety components into your automation project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Sep 23 – Oct 16
    Thursday, Tuesday
    12:30 PM - 03:20 PM
    H129 - Classroom - H Building
    Dustin Van De Weerd
    Sep 23 – Oct 16
    Thursday, Tuesday
    12:30 PM - 03:20 PM
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		View Rates

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/23/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Sep 23 – Oct 16
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I104A - AME Lab - I Building
    Bryan Schroder
    Sep 23 – Oct 16
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    		View Rates

    Firefighter II Certification 47503730

  • 1.05 credits
  • Fire Technology

    • This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition. Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS001 Fall
    Open
    09/23/2025 –
    12/02/2025
    		In-Person Public Safety Center of Excellence
    Sep 23 – Dec 2
    Tuesday
    09:30 AM - 01:30 PM
    PS111 - Command Center Classroom - Public Safety Center of Excellence
    		View Rates
    #PS002 Fall
    Open
    09/23/2025 –
    12/02/2025
    		In-Person Public Safety Center of Excellence
    Sep 23 – Dec 2
    Tuesday
    09:30 AM - 01:30 PM
    Public Safety Center of Excellence
    		$184.00

    Welding Pipe Fitting 1 31442303

  • 1.00 credits
  • Welding

    • Develops skills in Oxy-fuel cutting (OAC), Gas Metal Arc Welding (GMAW) and Shielded Metal Arc Welding (SMAW). Learners use OAC process to cut steel and the GMAW and SMAW process in 1F, 1G, 2F, 2G, 3F and 3G position on steel. Required welds include fillet and groove welds. Weld quality is assessed per AWS D1.1 Structural Steel Code. Preparing learners to weld Pipe in any position.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/24/2025 –
    10/29/2025
    		In-Person Wausau Main Campus
    Sep 24 – Oct 29
    Tuesday, Wednesday
    07:00 AM - 08:50 AM
    H127 - Computer Lab - H Building
    Daniel Grabko
    Sep 24 – Oct 29
    Thursday
    07:00 AM - 08:50 AM
    H124 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Automotive Service Experience 3 10602224

  • 1.00 credits
  • Autotec

    • Demonstrate shop practices. Learners will practice vehicle diagnosis and repairs on live customers vehicles. Emphasis on quality control of repairs, time management, techniques of customer communication (verbal and written), estimate planning, and meeting deadlines. Focus will be on third semester content.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/25/2025 –
    12/12/2025
    		In-Person Open Labs Wausau Main Campus
    Sep 25 – Dec 12
    -
    H114 - Blue Auto Lab - H Building
    Ross Nevienski
    		View Rates

    Automotive Service Experience 1 10602208

  • 1.00 credits
  • Autotec

    • Demonstrate shop practices. Learners will practice vehicle maintenance on live customers vehicles. Emphasis on quality control of repairs, time management, techniques of customer communication (verbal and written), estimate planning, and meeting deadlines. Focus will be on first semester content.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/25/2025 –
    12/12/2025
    		In-Person Open Labs Wausau Main Campus
    Sep 25 – Dec 12
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		View Rates

    Gears, Gearboxes, Gear Assemblies For The MMMP Trades (M-5) 50423734

  • 0.75 credits
  • Millwright

    • Course compares gear types and applications. Apprentices will develop skills inspecting gear assemblies, troubleshooting gear problems, removing gears and components, and reassembling gear drive systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/26/2025 –
    10/24/2025
    		In-Person Wausau Main Campus
    Sep 26
    Friday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Oct 10
    Friday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Oct 24
    Friday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		View Rates

    Leveraging Generative AI in Education: Strategies for K-12 Teaching Success 47664111

  • 0.10 credits
  • Automation Systems Technology
  • $89.00

    • This seminar for K-12 educators covers the integration of Generative AI tools like ChatGPT, Microsoft Co-Pilot, and Google Gemini into teaching practices. Participants will engage in hands-on activities to create lesson plans, rubrics, and assignments using AI. The session includes demonstrations of AI applications in classrooms and discussions on ethical AI use. The goal is to enhance teaching efficiency and student learning through AI technologies.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Fall
    Open
    09/26/2025
    		In-Person Wausau Main Campus
    Sep 26
    Friday
    09:00 AM - 11:30 AM
    A165 - WTPD Innovation Classroom A - A Building
    WTPD Contracts
    		$89.00

    Wild Mushroom Foray 60090113

  • 0.10 credits
  • Young & Adult Farmers
  • $30.00

    • This course will explore the basics of safe mushroom identification for numerous spring species. There are great edible mushrooms in the spring. We will look at velvet foot, pheasant's back, wood corals, and of course morels! The second part of the class is a field trip to the woods to use the identification skills in the real world. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD004 Fall
    Open
    09/26/2025
    		In-Person Antigo Campus
    Sep 26
    Friday
    06:00 PM - 09:00 PM
    T131 - Classroom - Antigo Campus
    WTPD Contracts
    		$30.00

    Machine Tool Processes 1 32420120

  • 2.00 credits
  • Machine Shop

    • Applies shop safety guidelines and becomes familiar with common machine shop equipment. Focuses on drill press, power saw, elementary lathe and mill operations and pedestal grinding machines. Learners will gain knowledge in layout tools and procedures and the proper use of hand tools in the shop.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Waitlist
    09/29/2025 –
    10/16/2025
    		In-Person Wausau Main Campus
    Sep 29 – Oct 16
    Monday
    07:00 AM - 08:50 AM
    H122 - Trades Classroom - H Building
    Joseph Bonke
    Sep 29 – Oct 16
    Monday, Tuesday, Wednesday, Thursday
    07:00 AM - 11:50 AM
    H108 - Machine Tool Lab - H Building
    Joseph Bonke
    Sep 29 – Oct 16
    Thursday, Tuesday, Wednesday
    07:00 AM - 08:50 AM
    H102 - Classroom - H Building
    Joseph Bonke
    		View Rates

    Lumber Manufacturing: Sawing, Edging & Trimming 10465178

  • 2.00 credits
  • Wood Manufacturing Technology

    • Explores the general overview of plant layout, machine centers, and different product flow in a lumber manufacturing setting.  Learners focus on the mix of species, and how these can be utilized in various product lines, and examine the processing of lumber through sawing, edging, and trimming manufacturing operations.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/29/2025 –
    10/24/2025
    		In-Person Antigo Campus
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:30 AM - 12:00 PM
    WT108B - Antigo Wood Tech Classroom - Antigo Campus
    Logan Wells
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:30 AM - 12:00 PM
    WT124 - Antigo Wood Technology Lab - Antigo Campus
    Logan Wells
    		View Rates

    Intro To Kiln Drying 10465181

  • 1.00 credits
  • Wood Manufacturing Technology

    • Introduces participants to the fundamentals of kiln drying lumber. The basics of determining moisture content, preparing samples and operating a dry kiln will be covered as well as an overview of different types of dry kiln equipment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/29/2025 –
    10/24/2025
    		In-Person Antigo Campus
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:00 AM - 08:20 AM
    WT108B - Antigo Wood Tech Classroom - Antigo Campus
    Logan Wells
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:00 AM - 08:20 AM
    WT124 - Antigo Wood Technology Lab - Antigo Campus
    Logan Wells
    		View Rates

    Intro to Hardwood Grading 10465179

  • 1.00 credits
  • Wood Manufacturing Technology

    • Expands of the skills previously introduced through the use of more advanced standard grade classifications and methods.  Learners build additional experience in the grading of hardwood lumber and logs and enhance their merchandising knowledge and understanding with emphasis on hands-on exercises and techniques.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/29/2025 –
    10/24/2025
    		In-Person Antigo Campus
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    12:30 PM - 01:50 PM
    WT108B - Antigo Wood Tech Classroom - Antigo Campus
    Logan Wells
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    12:30 PM - 01:50 PM
    WT124 - Antigo Wood Technology Lab - Antigo Campus
    Logan Wells
    		View Rates

    Sawmill Safety & Maintenance 10465184

  • 1.00 credits
  • Wood Manufacturing Technology

    • Builds on the safety and sawmill knowledge from previous classes to provide learners with more in-depth working knowledge of sawmills and their related hazards. Examines the need for regular preventive and essential maintenance of equipment, tools, and blades, and the safety challenges related to each, including where maintenance fails. Prepares students to prevent injuries, fatalities and break-downs in a mill environment within a safe and secure dedicated learning facility.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/29/2025 –
    10/24/2025
    		In-Person Antigo Campus
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    03:30 PM - 05:15 PM
    WT108B - Antigo Wood Tech Classroom - Antigo Campus
    Logan Wells
    Sep 29 – Oct 24
    Monday, Tuesday, Wednesday, Thursday, Friday
    03:30 PM - 05:15 PM
    WT124 - Antigo Wood Technology Lab - Antigo Campus
    Logan Wells
    		View Rates

    Mill Operations Overview 10465186

  • 1.00 credits
  • Wood Manufacturing Technology

    • Explores the hierarchy of the forest products industry structure as it relates to sawmill production facilities.  Learners will examine best practices and key performance indicators and apply these concepts in a live mill environment.  Topics that learners will focus on include lumber yield, grade proficiency, optimization of production flow, and downtime mitigation. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/29/2025 –
    10/17/2025
    		In-Person Antigo Campus
    Sep 29 – Oct 17
    Monday, Tuesday, Wednesday, Thursday, Friday
    02:00 PM - 03:20 PM
    WT124 - Antigo Wood Technology Lab - Antigo Campus
    Logan Wells
    Sep 29 – Oct 17
    Monday, Tuesday, Wednesday, Thursday, Friday
    02:00 PM - 03:20 PM
    WT108B - Antigo Wood Tech Classroom - Antigo Campus
    Logan Wells
    		View Rates

    Heavy Duty Suspension & Steering 2 10412124

  • 2.00 credits
  • Combustion Engines

    • Explores the operation, maintenance and overhaul of various heavy-duty steering and suspension systems. Wheel alignment diagnosis, adjustment and repair will be examined.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/29/2025 –
    10/15/2025
    		In-Person Agriculture Center of Excellence
    Sep 29 – Oct 15
    Monday, Tuesday, Wednesday, Thursday, Friday
    12:30 PM - 05:00 PM
    DESL100 - Diesel Classroom - Agriculture Center of Excellence
    James Eckardt
    		View Rates

    BLS (Basic Life Support) Skills Lab 47531509

  • 0.05 credits
  • Emergency Medical Services
  • $30.00

    • This course has 2 components: an online portion and an instructor-led classroom portion. You must complete the online portion first. This course covers adult, child and infant CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD014 Fall
    Open
    09/29/2025
    		In-Person Wausau Main Campus
    Sep 29
    Monday
    05:00 PM - 07:00 PM
    A162 - CPR Classroom - A Building
    Andrea Hebert
    		$30.00

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    09/30/2025 –
    10/13/2025
    		In-Person Wausau Main Campus
    Sep 30 – Oct 13
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Sep 30 – Oct 13
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #02 Fall
    Open
    09/30/2025 –
    10/09/2025
    		In-Person Wausau Main Campus
    Sep 30 – Oct 9
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H136 - Welding Lab - H Building
    Daniel Grabko
    Sep 30 – Oct 9
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Ignition Systems 10602220

  • 2.00 credits
  • Autotec

    • Perform basic tune ups and beyond basic tune-ups into the world of computer controlled ignition systems. You will learn how the computer processes and then uses sensor data to make a host of real time decisions concerning ignition controls. The use of DVOMs, scan tools, oscilloscopes, and computer self-diagnostics will be covered.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/01/2025 –
    10/21/2025
    		In-Person Wausau Main Campus
    Oct 1 – Oct 21
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		View Rates

    Cooling System Maintenance 10602204

  • 1.00 credits
  • Autotec

    • Introduces learners to cooling system preventative maintenance practices and procedures. Focusing on basic component identification, coolant leak detection procedures, coolant quality testing, and coolant exchange procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/01/2025 –
    10/13/2025
    		In-Person Wausau Main Campus
    Oct 1 – Oct 13
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112A - Auto Classroom/Lab - H Building
    		View Rates

    Basic Electricity For Gas Utility 31469108

  • 1.00 credits
  • Petroleum Chemical Service

    • Introduces the fundamental principles of electrical theory for AC (Alternating Current) and DC (Direct Current) as applied to electrical circuits and devices utilized the the gas utility industry. Some examples of equipment used in these circuits are: transformers, inductors, and capacitors. The general topics covered in this course include: safety, electrical theory, basic electrical quantities and their units of measurement; electrical circuits; and general uses of electricity in the gas utility industry.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/03/2025 –
    12/12/2025
    		In-Person Agriculture Center of Excellence
    Oct 3 – Dec 12
    Friday
    08:00 AM - 09:50 AM
    AG402 - Gas Utilities Classroom - Agriculture Center of Excellence
    Brian Mero
    		View Rates

    Directional Drilling 31469107

  • 1.00 credits
  • Petroleum Chemical Service

    • Covers the theory and safe operation of directional drilling operations. Learners will explore safe machine operation, drilling fluids selection and preparation, proper pull back techniques, and work site walk through and evaluation.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/03/2025 –
    12/12/2025
    		In-Person Agriculture Center of Excellence
    Oct 3 – Dec 12
    Friday
    10:00 AM - 01:00 PM
    AG402 - Gas Utilities Classroom - Agriculture Center of Excellence
    Brian Mero
    		View Rates

    Emotional Intelligence: Practical Strategies for Leaders 47196907

  • 0.15 credits
  • Supervision & Leadership Dev
  • $129.00

    • This course on Emotional Intelligence is designed to provide participants with a comprehensive understanding of the four key components of emotional intelligence: self-awareness, self-management, social awareness, and relationship management. Through a mix of foundational insights, practical examples, and engaging group discussion, participants will learn how to interpret their emotional intelligence scores and leverage them to become effective leaders. The course also offers strategies to enhance both personal and team emotional intelligence, with specific tools and activities for each component. Participants will apply these concepts to real-world workplace scenarios, focusing on conflict management and feedback, and will develop a personalized action plan to ensure ongoing growth and accountability.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Fall
    Open
    10/03/2025
    		In-Person Wausau Main Campus
    Oct 3
    Friday
    08:00 AM - 03:00 PM
    A165 - WTPD Innovation Classroom A - A Building
    Angela Servi
    		$129.00

    Web Design 1 B 10152552

  • 1.00 credits
  • IT - Programmer/analyst

    • Introduces Hypertext Markup Language (HTML), Cascading Style Sheet (CSS) coding techniques. Learners will create/modify web pages using HTML tags and style the web pages with CSS. Additionally, learners will create and edit text content. For the final course project, learners will create a personal website portfolio. Additional topics include: text editors, FTP utilities and browser tools.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/06/2025 –
    11/05/2025
    		In-Person Zoom Only ZOOM
    Oct 6 – Nov 5
    Tuesday
    02:00 PM - 04:50 PM
    ZOOM
    Clay Hess
    		View Rates

    Data Concepts B 10152532

  • 1.00 credits
  • IT - Programmer/analyst

    • Learners describe primary keys and how to select them. Learners explain normalization and its role in the database design process. Learners apply normalization rules to evaluate and correct table structures. Learners use SQL Server and retrieve information from data tables. Learners use to SQL queries to join tables, aggregate data, and restrict data retrieval.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/06/2025 –
    11/05/2025
    		In-Person Zoom Only ZOOM
    Oct 6 – Nov 5
    Monday
    01:00 PM - 02:50 PM
    ZOOM
    J.J. Minarcin
    		View Rates

    Object-Oriented Programming B 10152505

  • 1.00 credits
  • IT - Programmer/analyst

    • Explores object-oriented programming concepts and C# .NET syntax and features, with a focus on iterative development and testing. This course uses a variety of resources including Unified Modeling Language (UML) diagrams to present design principles and concepts. Learners will create console and GUI C# .NET applications which incorporate n-tier design principles and object-oriented design principles and patterns, emphasizing the use of composition over inheritance, interfaces and polymorphism. Additional topics include: advanced event handlers and timers, recursion, sorting and searching algorithms and various data structures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/06/2025 –
    11/05/2025
    		In-Person Zoom Only ZOOM
    Oct 6 – Nov 5
    Wednesday
    02:00 PM - 03:50 PM
    ZOOM
    Zachary Thunder
    		View Rates

    Baking Fundamentals 10316102

  • 2.00 credits
  • Culinary Arts

    • Utilize baking principles and procedures for producing quick breads, yeast breads, cookies, cakes and pies. Learners will calculate product costs, weigh and measure ingredients, mix, shape, bake, garnish, package and merchandise bakery products.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/06/2025 –
    10/30/2025
    		In-Person Wausau Main Campus
    Oct 6 – Oct 20
    Monday
    10:00 AM - 01:30 PM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    Oct 7 – Oct 30
    Thursday, Tuesday, Wednesday
    08:00 AM - 01:30 PM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    		View Rates

    Jig And Fixture Design For Machine Trades Apprentice 50420726

  • 0.50 credits
  • Machine Shop

    • This course introduces the apprentice to the concepts of jig and fixture design as part of their apprenticeship related instruction. Topics include the basic elements of tool design, jig and fixture application, and the actual design of tooling.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/07/2025 –
    12/02/2025
    		In-Person Wausau Main Campus
    Oct 7
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Duane Yorde
    Oct 21
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Duane Yorde
    Nov 4
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Duane Yorde
    Nov 18
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Duane Yorde
    Dec 2
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Duane Yorde
    		View Rates

    Electrical Skill Development 50413508

  • 2.00 credits
  • Electricity

    • Introduces the apprentice to the layout and purpose of the National Electric Code. It also strives to teach the apprentice proper methodology to research a code question and correctly interpret what they are reading. Various examples in the textbook and activity sheets help guide the apprentice through this process.  Apprentices will research the structure of the National Electric Code and define the requirements of the code that are common to all electrical installations and electrical codes applicable to the trade.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/07/2025 –
    12/02/2025
    		In-Person Wausau Main Campus
    Oct 7 – Dec 2
    Tuesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		View Rates

    Metallurgy For MMMP Trades (C-7) 50423716

  • 0.25 credits
  • Millwright

    • This course develops apprentice skills regarding metallurgic concepts. Apprentices will compare various metals and their applications, apply metallurgic techniques to work processes, test metals for hardness, and examine heat treating applications.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/08/2025
    		In-Person Wausau Main Campus
    Oct 8
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		View Rates

    AC Fundamentals 50413510

  • 2.00 credits
  • Electricity

    • Introduces the industrial electrical apprentice to the basic concepts of alternating current. Emphasis is placed on circuit analysis and the problem solving skills necessary for the maintenance of modern industrial electric systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Fall
    Open
    10/08/2025 –
    12/10/2025
    		In-Person Wausau Main Campus
    Oct 8 – Nov 19
    Wednesday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Oct 8 – Nov 19
    Wednesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    Dec 3 – Dec 10
    Wednesday
    07:00 AM - 03:30 PM
    H146B - Mechatronics Project Lab - H Building
    James Buck
    Dec 3 – Dec 10
    Wednesday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Dec 3 – Dec 10
    Wednesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		View Rates

    Programmable Logic Controllers 2 50413515

  • 2.00 credits
  • Electricity

    • Expands on the subjects introduced in the Programmable Logic Controller 1 course. Learners strengthen their knowledge of programming and their troubleshooting ability. They apply the principles to installation, communication, faults, and troubleshooting programmable logic controllers and other automation equipment in an industrial environment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/10/2025 –
    12/12/2025
    		In-Person Wausau Main Campus
    Oct 10 – Nov 21
    Friday
    07:00 AM - 03:30 PM
    H146B - Mechatronics Project Lab - H Building
    Marc Martindale
    Oct 10 – Nov 21
    Friday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    Marc Martindale
    Oct 10 – Nov 21
    Friday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    Dec 5 – Dec 12
    Friday
    07:00 AM - 03:30 PM
    H146B - Mechatronics Project Lab - H Building
    Marc Martindale
    Dec 5 – Dec 12
    Friday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    Marc Martindale
    Dec 5 – Dec 12
    Friday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    		View Rates

    Diesel Electrical Systems 4 10412130

  • 3.00 credits
  • Combustion Engines

    • Expands on heavy duty electronic control modules. Analyze, in detail, the different types of vehicle data links and protocols. Strengthens understanding on how to troubleshoot data link failures and faults. Learners will also familiarize themselves with electronic troubleshooting manuals and charts. Through both lecture and lab we will explore techniques on using technology for fault code retrieval, information and repairs.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/13/2025 –
    11/11/2025
    		In-Person Agriculture Center of Excellence
    Oct 13 – Oct 24
    Monday, Tuesday, Wednesday, Friday
    07:30 AM - 12:00 PM
    DESL100 - Diesel Classroom - Agriculture Center of Excellence
    James Eckardt
    Oct 27 – Oct 31
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 12:00 PM
    DESL100 - Diesel Classroom - Agriculture Center of Excellence
    James Eckardt
    Nov 3 – Nov 11
    Monday, Tuesday, Wednesday, Friday
    07:30 AM - 12:00 PM
    DESL100 - Diesel Classroom - Agriculture Center of Excellence
    James Eckardt
    		View Rates

    Basic Instrumentation 50413517

  • 2.00 credits
  • Electricity

    • Introduces learner to industrial automated equipment and systems.  Learning outcomes will examine basic control loops, compare automated and robotic manufacturing systems,  explore distributed and central control, examine various system layouts, apply controller concepts and communications, and discuss automated control system safety   Signaling systems and redundant systems are explored as well.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/13/2025 –
    12/08/2025
    		In-Person Wausau Main Campus
    Oct 13 – Dec 8
    Monday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    Marc Martindale
    		View Rates

    Pneumatics & Compressed Air For MMMP Trades (C-9) 50423718

  • 0.75 credits
  • Millwright

    • This course was formerly the C-9 module for the MMMP apprenticeship. It provides instruction to apprentices concerning many aspects of inspecting, servicing, and troubleshooting pneumatic systems and components. Apprentices will learn safety related issues and be taught proper safety procedures for working with pneumatic systems and components.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/13/2025 –
    11/10/2025
    		In-Person Wausau Main Campus
    Oct 13
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Oct 27
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Nov 10
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		View Rates

    Gas Metal Arc Welding 3: Spray Transfer 10442185

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/14/2025 –
    10/27/2025
    		In-Person Wausau Main Campus
    Oct 14 – Oct 27
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Oct 14 – Oct 27
    Monday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H137 - Welding Lab - H Building
    Veronica Hope
    		View Rates
    #02 Fall
    Open
    10/14/2025 –
    10/23/2025
    		In-Person Wausau Main Campus
    Oct 14 – Oct 23
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H136 - Welding Lab - H Building
    Daniel Grabko
    Oct 14 – Oct 23
    Thursday, Tuesday, Wednesday
    10:00 AM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Drivetrain Service 10602205

  • 2.00 credits
  • Autotec

    • Introduction to drivetrain maintenance procedures. Learners will perform fluid exchange services for transmission, transfer case, and differential sytems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/14/2025 –
    11/04/2025
    		In-Person Wausau Main Campus
    Oct 14 – Nov 4
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    		View Rates

    Gas Utility Field Training 3 31469101

  • 5.00 credits
  • Petroleum Chemical Service

    • Learners will investigate the gas industry by examining gate and regulation stations, proper maintenance of a gas distribution system, leak detection surveying and pinpointing, while also reviewing fire control, emergency response scenarios, system uprating, mapping, leak repair, and gas line abandonment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/15/2025 –
    12/11/2025
    		In-Person Agriculture Center of Excellence
    Oct 15 – Dec 11
    Monday, Tuesday, Wednesday, Thursday
    09:30 AM - 03:30 PM
    AG402 - Gas Utilities Classroom - Agriculture Center of Excellence
    Brian Mero
    		View Rates

    Preventive And Predictive Maintenance For MMMP Trades (C-15) 50423724

  • 1.25 credits
  • Millwright

    • Course examines both preventative and predictive maintenance concepts as they apply to millwright work processes and machine maintenance. Apprentices will develop skills related to assessing machine conditions and faults based on both preventative and predictive maintenance.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Fall
    Open
    10/15/2025 –
    11/12/2025
    		In-Person Wausau Main Campus
    Oct 15
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Oct 22
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Oct 29
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Nov 5
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Nov 12
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		View Rates