Displaying 701 - 785 of 785 No filters currently applied.

Machine Control 1: Ladder Logic Fundamentals 10620151

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$188.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$188.79

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Introduction To Safety PLC Programming 10664110

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Introduces the concept of setting up and programming various safety devices including GuardMaster Smart sensors, Programmable safety relays and safety PLC’s, The course will focus on how to setup, program and integrate safety components into your automation project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Scada Systems 1 10664106

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Organize and develop FactoryTalk View Site Edition (SE) applications. This course provides opportunities for learners to organize and develop FactoryTalk View SE applications. During class, learners will have the opportunity to practice the skills used to create/build graphic displays. Learners will learn how to configure alarms and security, trend data, and test their application using FactoryTalk View SE Client. Learners will also work with RSLinx Enterprise communications software

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Scada Systems 2 10664111

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Continuation of SCADA Systems 1, learners will organize and develop FactoryTalk View Site Edition (SE) network/server-based application. Learners will have the opportunity to practice the skills needed to create/build detailed graphic displays, trend charts and data logs. Learners will learn how to configure alarms and set up system security, build data logs, and test their application using FactoryTalk View SE Network Distributed Application.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Advanced Drive Applications 10664108

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Program drive parameters for a drive application. This course will teach students how to create a custom parameter group based upon drive applications. Throughout this course, the instructor will cover a range of topics from establishing communications with a PowerFlex 525 drive via a USB connection and Ethernet/IP network to test parameters of a PowerFlex 525 drive and control a drive in STUDIO 5000.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$200.04

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Industry Workplace Safety 10620172

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79

    PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    12:00 PM - 02:50 PM
    I104A - AME Lab - I Building
    Benjamin Effa
    Apr 27 – May 20
    Monday, Wednesday
    12:00 PM - 02:50 PM
    I110 - Classroom - I Building
    Benjamin Effa
    		$188.79

    Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$171.29

    Machine Control 3: Sensors And Machine Safety 10620153

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Mechanical Systems 2: Power Transmission Systems 10620158

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79
    #01 Spring
    Open
    04/28/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Apr 28 – May 21
    Thursday, Tuesday
    09:00 AM - 11:50 AM
    I110 - Classroom - I Building
    Bryan Schroder
    		$188.79

    PLC 2: Timers, Counters And Program Control 10620165

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    08:00 AM - 10:50 AM
    H129 - Classroom - H Building
    Matt Jacobson
    		$188.79

    Industrial Motors 1: Electric Motors 10620159

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I110 - Classroom - I Building
    Benjamin Knospe
    Apr 27 – May 20
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$188.79

    Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$188.79

    Mechanical Systems 1: Basic Machine Components 10620157

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces how machines work and basic mechanical power transmission system components.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    09:00 AM - 11:50 AM
    I110 - Classroom - I Building
    Bryan Schroder
    		$188.79

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$173.79

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$173.79
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I104A - AME Lab - I Building
    Bryan Schroder
    Apr 27 – May 20
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I110 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$171.29

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    Mar 24 – Apr 23
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79

    Solidworks 1 10606133

  • 1.00 credits
  • Mechanical Technology
  • $171.29

    • Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 19
    Tuesday
    01:00 PM - 03:50 PM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$171.29

    Transition To Trainer: Your Role As A Journey Worker 47455455

  • 0.20 credits
  • Supervision Management
  • $99.00

    • In this workshop you will be introduced to a new set of basic tools - the tools of a job site trainer. You will explore the skills that are necessary to be an effective trainer, discover how to deliver hands-on training, and examine the process for giving useful feedback.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD005 Spring
    Open
    03/24/2026
    		In-Person Wausau Main Campus
    Mar 24
    Tuesday
    08:00 AM - 04:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Joseph Dziedzic
    		$99.00

    Press Systems 10204182

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Analyzes offset, digital, flexographic and large format printing as learners work on projects within an individual and team environment. Four-color process and the PMS color system along with other printing concepts will be explained. Learners should take Introduction to Printing (10-204-112) before this course, or have prior knowledge of the printing industry.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/25/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H109 - Mac Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Andrew Somers
    		$555.12

    Understanding Substance Use 10550201

  • 3.00 credits
  • Substance Use Disorder Counseling
  • $503.87

    • Explore the bio-psych social dynamics of substance use. Examine treatment approaches, models, and screening criteria. Examine substances of abuse, history of SUDs, and their impact on the individual and society.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/25/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    01:00 PM - 04:50 PM
    A239 - Classroom - A Building
    Christina Lucas
    		$503.87

    Respiratory Clinical 5 10515183

  • 3.00 credits
  • Respiratory Therapy
  • $532.62

    • Focuses on the completion of respiratory therapy competencies and transition to employment. Emphasis is placed on promotion of evidence-based practice using established clinical practice guidelines and published research for its relevance to patient care.   

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/26/2026 –
    05/22/2026
    		In-Person Wausau Off Campus
    Mar 26 – May 22
    Thursday, Friday
    06:00 AM - 06:00 PM
    Wausau Off Campus
    Ben Olson
    		$532.62

    Group Facilitation 10550204

  • 3.00 credits
  • Substance Use Disorder Counseling
  • $503.87

    • An introduction to theory and practice of group dynamics and processes. Includes ethical considerations, effective group leadership, and stages of group development. Also includes demonstration of group facilitation skills, clinical documentation, co-facilitation strategies, reflective practitioner techniques, and group formation.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 26 – May 21
    Thursday
    01:00 PM - 04:50 PM
    A239 - Classroom - A Building
    Christina Lucas
    Mar 26 – May 21
    Thursday
    01:00 PM - 04:50 PM
    A241 - Helping Skills Lab - A Building
    Christina Lucas
    		$503.87

    Microeconomics 10809143

  • 3.00 credits
  • Social Science
  • $503.87

    • Examines the behavior of individual decision makers, primarily consumers and firms. Topics include choices of how much to consume and to produce, the functioning of perfectly and imperfectly competitive markets, the conditions under which markets may fail, and arguments for and against government intervention. The student applies the fundamental tools of economics to real world problems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 26 – May 21
    Thursday
    09:00 AM - 11:50 AM
    A216 - Classroom - A Building
    		$503.87

    Nursing Assistant 30543300

  • 3.00 credits
  • Nursing
  • $532.62

    • Prepares learners to perform basic nursing skills under the supervision of a nurse for job entry as a nursing assistant or a home health aide (HHA) in health care agencies. Face-to-face and hybrid classroom, campus lab and clinical instruction are offered at various nursing homes and hospitals throughout the district. Students need to submit an application and complete background check.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #16 Spring
    Open
    03/26/2026 –
    04/30/2026
    		In-Person Wausau Main Campus Wausau Off Campus
    Mar 26 – Apr 24
    Thursday, Friday
    09:00 AM - 02:00 PM
    2054 - CNA Lab - Center for Health Sciences (CHS)
    Ashley Glodowski
    Apr 16 – Apr 24
    Thursday, Friday
    07:00 AM - 03:00 PM
    Wausau Off Campus
    Ashley Glodowski
    Apr 30
    Thursday
    09:00 AM - 02:00 PM
    2054 - CNA Lab - Center for Health Sciences (CHS)
    Ashley Glodowski
    		$532.62
    #20 Spring
    Open
    04/06/2026 –
    05/21/2026
    		In-Person Wausau Main Campus Wausau Off Campus
    Apr 6 – Apr 29
    Monday, Wednesday
    03:00 PM - 08:00 PM
    2024 - CNA Lab - Center for Health Sciences (CHS)
    May 4 – May 20
    Monday, Wednesday
    03:00 PM - 08:30 PM
    Wausau Off Campus
    May 21
    Thursday
    03:00 PM - 08:00 PM
    2024 - CNA Lab - Center for Health Sciences (CHS)
    		View Rates
    #17 Spring
    Open
    04/07/2026 –
    05/07/2026
    		In-Person Spencer Campus Spencer Off Campus
    Apr 7 – Apr 22
    Thursday, Tuesday, Wednesday
    04:00 PM - 09:00 PM
    S114 - CNA Lab - Spencer Campus
    Jessica Thomsen
    Apr 23 – May 6
    Thursday, Tuesday, Wednesday
    04:00 PM - 09:30 PM
    Spencer Off Campus
    Jessica Thomsen
    May 7
    Thursday
    04:00 PM - 09:00 PM
    S114 - CNA Lab - Spencer Campus
    Jessica Thomsen
    		$532.62

    Mine Safety 47449412

  • 0.20 credits
  • Industrial Safety
  • $89.00

    • This course is provided by MSHA approved instructors and covers 8 complete hours of Mine Health and Safety topics including first aid, current MSHA changes, miners' rights and other relevant topics. Attendees will come from the mining industry, suppliers, vendors and contractors to the mining industry, logistics companies that do truck driving at mine sites, gravel pits, quarries, and companies that do excavation at mine sites for aggregate.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Spring
    Open
    03/26/2026
    		In-Person Wausau Main Campus
    Mar 26
    Thursday
    08:00 AM - 04:00 PM
    A165 - WTPD Innovation Classroom A - A Building
    WTPD Contracts
    		$89.00

    Menu Planning, Management And Design 10316112

  • 1.00 credits
  • Culinary Arts
  • $171.29

    • Plan and prepare menus for a variety of food operations and budgets. Projects will include designing, pricing and menu analysis.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/06/2026 –
    04/30/2026
    		In-Person Wausau Main Campus
    Apr 6 – Apr 23
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 08:30 AM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    Apr 27 – Apr 30
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 11:00 AM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    		$171.29

    Medical Assistant Practicum 31509310

  • 3.00 credits
  • Medical Assistant
  • $503.87

    • Requires medical assistant students to integrate and apply knowledge and skills from all previous medical assistant courses in actual ambulatory health care settings. Learners perform medical assistant administrative, clinical, and laboratory duties under the supervision of trained mentors to effectively transition to the role of a medical assistant. This is a supervised, unpaid, clinical experience.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/13/2026 –
    05/22/2026
    		In-Person Wausau Main Campus Wausau Off Campus
    Apr 13 – May 21
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 04:30 PM
    Wausau Off Campus
    Nicole Roberts
    Apr 24
    Friday
    09:00 AM - 12:00 PM
    2045 - Classroom - MA - Center for Health Sciences (CHS)
    Nicole Roberts
    May 8
    Friday
    09:00 AM - 12:00 PM
    2045 - Classroom - MA - Center for Health Sciences (CHS)
    Nicole Roberts
    May 22
    Friday
    09:00 AM - 12:00 PM
    2045 - Classroom - MA - Center for Health Sciences (CHS)
    Nicole Roberts
    		$503.87

    Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

  • 0.00 credits
  • Fire Technology
  • $160.00

    • The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

    4 Course Sections
    4 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS021 Spring
    Open
    04/17/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 17
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS022 Spring
    Open
    05/01/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 1
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS023 Spring
    Open
    05/15/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 15
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00
    #PS024 Spring
    Open
    05/29/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 29
    Friday
    09:00 AM - 03:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$160.00

    Clinical Experience 3 10513153

  • 2.00 credits
  • Clinical Laboratory Technician
  • $337.58

    • Practice the principles and procedures of laboratory medicine as an entry level Medical Laboratory Technician (MLT) in a clinical laboratory setting. Working alongside laboratory professionals, you will collect and process specimens, operate laboratory analyzers and instruments and report results in a Laboratory Information Systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/20/2026 –
    05/22/2026
    		In-Person Wausau Off Campus
    Apr 20 – May 22
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 04:30 PM
    Wausau Off Campus
    Cory Sullivan
    		$337.58

    Servo Systems 3: Advanced Position Control And Integration 10620163

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Advanced servo integration is accomplished using industrial servo drives and programmable logic controllers. Servo gearing and camming is studied through hands-on activities. Learners solve real world servo related problems using advanced PLC and Servo programming.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    02:00 PM - 04:50 PM
    I104A - AME Lab - I Building
    Matt Jacobson
    Apr 27 – May 20
    Monday, Wednesday
    02:00 PM - 04:50 PM
    I110 - Classroom - I Building
    Matt Jacobson
    		$188.79

    Hazardous Materials Operations 10503203

  • 1.00 credits
  • Fire Technology
  • $185.04

    • Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    08:00 AM - 12:00 PM
    Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$185.04
    #02 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    06:00 PM - 10:00 PM
    Merrill Public Safety Center of Excellen
    Bryson Cruise
    		$185.04

    Industrial Electronics Technology 6 - Advanced Digital Concepts 10660128

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Apply advanced concepts involving digital electronics and electronic devices. Operational characteristics of advanced digital circuits will be explored and analyzed. Project based labs will allow learners to demonstrate an understanding of digital integrated circuits including combinational logic, counter circuits and storage circuits. IET 6 expands on IET 3 and IET 5.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/28/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Apr 28 – May 21
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I104B - AME Lab - I Building
    Bryan Schroder
    Apr 28 – May 21
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Hazardous Materials Operations 47503785

  • 0.60 credits
  • Fire Technology

    • Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1001, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS010 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    08:00 AM - 12:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates
    #PS012 Spring
    Open
    04/28/2026 –
    05/14/2026
    		In-Person Merrill Public Safety Center of Excellen
    Apr 28 – May 14
    Thursday, Tuesday
    06:00 PM - 10:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates

    EFDA Prosthodontic Procedures 10508123

  • 2.00 credits
  • Dental
  • $400.08

    • Learn how to perform dental prosthodontic procedures including adjustment of dentures and other removable oral appliances, impressions, packing cord, and removal of sutures and dressings.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/01/2026 –
    05/15/2026
    		In-Person Wausau Main Campus
    May 1 – May 15
    Friday
    08:00 AM - 04:00 PM
    1002 - Dental Classroom - Center for Health Sciences (CHS)
    Susan Pernsteiner
    May 1 – May 15
    Friday
    08:00 AM - 04:00 PM
    1009 - Dental Lab - Center for Health Sciences (CHS)
    Susan Pernsteiner
    		$400.08

    Culinary Skills Project 10316128

  • 1.00 credits
  • Culinary Arts
  • $241.29

    • Assess the learner on skills learned throughout the first year of the Culinary Arts program.  The learner will complete various culinary and sanitation skills in a timed environment.  

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/04/2026 –
    05/14/2026
    		In-Person Wausau Main Campus
    May 4 – May 14
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 12:30 PM
    E110 - Culinary Lab Wausau - E Building
    Brock Decker
    		$241.29

    National Registry Skills Review -EMT 47531516

  • 0.15 credits
  • Emergency Medical Services
  • $27.43

    • Practice skills in preparation for the NREMT practical skills exam.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Spring
    Open
    05/22/2026
    		In-Person Wausau Main Campus
    May 22
    Friday
    11:00 AM - 05:00 PM
    2005 - Classroom - Center for Health Sciences (CHS)
    Paul Scheffler
    May 22
    Friday
    11:00 AM - 05:00 PM
    2014 - Classroom - Center for Health Sciences (CHS)
    Paul Scheffler
    May 22
    Friday
    11:00 AM - 05:00 PM
    2016A - Classroom - Center for Health Sciences (CHS)
    Paul Scheffler
    		$27.43

    National Registry - EMT 98NREMTA

  • 0.00 credits
  • Emergency Medical Services

    • Practical skills testing for Emergency Medical Technician licensing.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Spring
    Open
    05/23/2026
    		In-Person Wausau Main Campus
    May 23
    Saturday
    07:00 AM - 05:00 PM
    2005 - Classroom - Center for Health Sciences (CHS)
    Paul Scheffler
    May 23
    Saturday
    07:00 AM - 05:00 PM
    2014 - Classroom - Center for Health Sciences (CHS)
    Paul Scheffler
    May 23
    Saturday
    07:00 AM - 05:00 PM
    2016A - Classroom - Center for Health Sciences (CHS)
    Paul Scheffler
    		View Rates

    Fire Fighter II Practical Exam 98FIREB

  • 0.00 credits
  • Fire Technology

    • Practical skills testing for Fire Fighter II state certification.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS002 Spring
    Open
    05/30/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 30
    Saturday
    12:00 PM - 04:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates

    Fire Fighter 1 Practical Exam 98FIREA

  • 0.00 credits
  • Fire Technology

    • Practical skills testing for Fire Fighter 1 state certification.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS003 Spring
    Open
    05/30/2026
    		In-Person Merrill Public Safety Center of Excellen
    May 30
    Saturday
    08:00 AM - 12:00 PM
    PS111 - Command Center Classroom - Merrill Public Safety Center of Excellen
    Bryson Cruise
    		View Rates