Displaying 801 - 900 of 946 No filters currently applied.

Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

  • 1.00 credits
  • Welding

    • Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

  • 1.00 credits
  • Welding

    • Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Metal Arc Welding 6: Sheet Metal 10442205

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Mar 23 – May 21
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Safety 10442172

  • 1.00 credits
  • Welding

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

  • 1.00 credits
  • Welding

    • Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #02 Spring
    Open
    03/25/2026 –
    04/09/2026
    		In-Person Wausau Main Campus
    Mar 25 – Apr 9
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		View Rates
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Industry Workplace Safety 10620172

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79

    PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$171.29

    Machine Control 3: Sensors And Machine Safety 10620153

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Mechanical Systems 2: Power Transmission Systems 10620158

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79

    PLC 2: Timers, Counters And Program Control 10620165

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    08:00 AM - 10:50 AM
    H129 - Classroom - H Building
    Matt Jacobson
    		$188.79

    Industrial Motors 1: Electric Motors 10620159

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79

    Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$188.79

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$188.79

    Mechanical Systems 1: Basic Machine Components 10620157

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces how machines work and basic mechanical power transmission system components.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$188.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    09:00 AM - 11:50 AM
    I110 - Classroom - I Building
    Bryan Schroder
    		$188.79

    Machine Control 1: Ladder Logic Fundamentals 10620151

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$188.79

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Effa
    		$188.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Effa
    		$188.79

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$173.79

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Matt Jacobson
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Matt Jacobson
    		$173.79

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Benjamin Knospe
    		$171.29
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Benjamin Knospe
    		$171.29

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    Mar 24 – Apr 23
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 22
    -
    T112 - IEM Lab - Antigo Campus
    Bryan Schroder
    		$173.79
    #92 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 22
    -
    P101B - IEMT Lab - Phillips Campus
    Bryan Schroder
    		$173.79

    Gas Metal Arc Welding 3: Spray Transfer 10442185

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Weld Print Reading 1: Basic Views And Dimensions 10442181

  • 1.00 credits
  • Welding

    • Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Weld Print Reading 2: Other Views And Symbols 10442182

  • 1.00 credits
  • Welding

    • Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #91 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Antigo Campus
    Mar 23 – May 20
    -
    T110 - Welding Shop/Lab - Antigo Campus
    Jesse Richardson
    		View Rates

    Welding Fabrication Techniques 3: Production Welding 10442191

  • 1.00 credits
  • Welding

    • Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates
    #02 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		View Rates

    Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

  • 1.00 credits
  • Welding

    • This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Welding Fabrication Techniques 1: International Weld Symbols 10442189

  • 1.00 credits
  • Welding

    • This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #92 Spring
    Open
    03/23/2026 –
    05/20/2026
    		In-Person Open Labs Phillips Campus
    Mar 23 – May 20
    -
    P101 - Welding Lab - Phillips Campus
    Adam Zogata
    		View Rates

    Critical Care Paramedic Refresher 47531500

  • 0.60 credits
  • Emergency Medical Services
  • $100.00

    • Provides the continuing education required for renewing the Critical Care endorsement for the Wisconsin Department of Health Services (DHS). Provides the necessary training for awareness of critical care equipment and assessment tools needed to care for a patient during the mobile transition from ground care to an acute care setting. Reviews the basic principles of critical care transport including pharmacology, monitoring, lab values, and ventilation.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PS002 Spring
    Open
    03/23/2026 –
    05/22/2026
    		Online Online
    Mar 23 – May 22
    -
    Online
    William Isham
    		$100.00

    Solidworks 1 10606133

  • 1.00 credits
  • Mechanical Technology
  • $171.29

    • Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 19
    Tuesday
    01:00 PM - 03:50 PM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$171.29

    Metallurgy 32420119

  • 1.00 credits
  • Machine Shop

    • Develop knowledge in science of metals and alloys. The crystalline structure and microstructure of metals and their effect on the properties of metals are studied. Prime consideration is given to heat treatment operations dealing with ferrous metals. Explore non-destructive testing of different metals along with destructive testing methods.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    07:00 AM - 08:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		View Rates

    Design & Presentation Techniques 1 10614119

  • 2.00 credits
  • Architectural Technology

    • Explores the theory of design and its application in the world of architecture. Focuses learners’ skills of creating and thinking within the architectural field. Examines critical elements of design theory, sketching application, and space planning. Develops skills in visualization, modeling, presentation drawings, floor plans and exterior compositions. Prepares learners to be able to discuss projects in architectural terms with appropriate professional vocabulary.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    08:30 AM - 11:50 AM
    F212 - Classroom/Computer Lab - F Building
    Travis Severson
    		View Rates

    Applied Mechanics For Technicians 10606111

  • 3.00 credits
  • Mechanical Technology
  • $556.54

    • Develop a thorough understanding of the statics and mechanics principles that are of paramount importance for learners in the engineering and technical programs. Mechanics is the branch of physical science that deals with state of rest or motion under the action of forces. Mechanics is the foundation for most engineering sciences and an indispensable prerequisite to most engineering or technical courses. In this course, you will develop a thorough understanding of the statics and mechanics principles that are of paramount importance for students in the engineering and technical programs. You will then apply these mechanics principles in various assignments and projects.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    03/24/2026 –
    05/22/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 24 – May 22
    Tuesday, Wednesday, Thursday, Friday
    09:00 AM - 10:50 AM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$556.54

    Transition To Trainer: Your Role As A Journey Worker 47455455

  • 0.20 credits
  • Supervision Management
  • $99.00

    • In this workshop you will be introduced to a new set of basic tools - the tools of a job site trainer. You will explore the skills that are necessary to be an effective trainer, discover how to deliver hands-on training, and examine the process for giving useful feedback.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD005 Spring
    Open
    03/24/2026
    		In-Person Wausau Main Campus
    Mar 24
    Tuesday
    08:00 AM - 04:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Joseph Dziedzic
    		$99.00

    Press Systems 10204182

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Analyzes offset, digital, flexographic and large format printing as learners work on projects within an individual and team environment. Four-color process and the PMS color system along with other printing concepts will be explained. Learners should take Introduction to Printing (10-204-112) before this course, or have prior knowledge of the printing industry.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/25/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H109 - Mac Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Andrew Somers
    		$555.12

    Understanding Substance Use 10550201

  • 3.00 credits
  • Substance Use Disorder Counseling
  • $503.87

    • Explore the bio-psych social dynamics of substance use. Examine treatment approaches, models, and screening criteria. Examine substances of abuse, history of SUDs, and their impact on the individual and society.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/25/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    01:00 PM - 04:50 PM
    A239 - Classroom - A Building
    Christina Lucas
    		$503.87

    Respiratory Clinical 5 10515183

  • 3.00 credits
  • Respiratory Therapy
  • $532.62

    • Focuses on the completion of respiratory therapy competencies and transition to employment. Emphasis is placed on promotion of evidence-based practice using established clinical practice guidelines and published research for its relevance to patient care.   

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/26/2026 –
    05/22/2026
    		In-Person Wausau Off Campus
    Mar 26 – May 22
    Thursday, Friday
    06:00 AM - 06:00 PM
    Wausau Off Campus
    Ben Olson
    		$532.62

    Group Facilitation 10550204

  • 3.00 credits
  • Substance Use Disorder Counseling
  • $503.87

    • An introduction to theory and practice of group dynamics and processes. Includes ethical considerations, effective group leadership, and stages of group development. Also includes demonstration of group facilitation skills, clinical documentation, co-facilitation strategies, reflective practitioner techniques, and group formation.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 26 – May 21
    Thursday
    01:00 PM - 04:50 PM
    A239 - Classroom - A Building
    Christina Lucas
    Mar 26 – May 21
    Thursday
    01:00 PM - 04:50 PM
    A241 - Helping Skills Lab - A Building
    Christina Lucas
    		$503.87