Examines proven strategies designed to help learners achieve greater personal, academic, and professional success. Learners will apply personal responsibility thinking and behaviors; self- management, awareness, and motivation strategies; as well as interdependence skills to develop a proactive life plan.

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

Presents the applications and theory of basic physics principles. This course emphasizes problem-solving, laboratory investigation and applications. Topics include unit conversion and analysis, vectors, translational and rotational kinematics, translational and rotational dynamics, heat and temperature and harmonic motion and waves. Keywords: Gen Phys, Physics

Introduces fundamentals with NFPA Standards the student will learn how to use many of the powerful electrical drawing creation tools in the AutoCAD Electrical software. Activities include create schematic drawings (ladder logic and point to point), panel drawings, and PLC-I/O circuits using automated commands for symbol insertion, component tagging, wire numbering, and drawing modification. In addition, they are introduced to methods of customizing AutoCAD Electrical symbols, circuits, and databases.

This course offers algebra content with applications and an introduction to functions and complex numbers. Content builds upon the arithmetic of real numbers by using variable equations to solve problems. Topics include graphing and finding algebraic solutions for linear equations and inequalities, quadratic, exponential, polynomial, radical, and rational equations.

This course covers skills needed for success in Calculus and many application areas at the baccalaureate level. Topics include the real and complex number systems, polynomials, exponents, radicals, solving equations and inequalities, relations and functions, systems of equations and inequalities, graphing, and conic sections.

Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

Introduces how machines work and basic mechanical power transmission system components.

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

Presents the applications and theory of basic physics principles. This course emphasizes problem solving, laboratory investigation and applications. Topics include periodic motion, wave motion, optics, magnetism, static electricity, DC electricity, AC electricity and electromagnetism. Keywords: Physics 2

Develops writing skills which include prewriting, drafting, revising and editing. A variety of writing assignments are designed to help the learner analyze audience and purpose, research and organize ideas and format and design documents based on subject matter and content. Also develops critical reading and thinking skills through the analysis of a variety of written documents. Keywords: Written Comm, Comm, Writing

Learners develop and apply skills in all aspects of the writing process. Through a variety of learning activities and written documents, learners employ rhetorical strategies, plan, organize and revise content, apply critical reading strategies, locate and evaluate information, integrate and document sources, and apply standardized English language conventions.Keywords:English Comp, Comp 1, E Com, English 1, English

Apply and learn operation of mills, lathes, drilling, grinding and general metal fabrication. This course is designed to give the learner the theory and hands-on training leading to the ability to work safely in a shop. Individual part fabricating and precision measurement are covered.

Introduces a basic understanding of a robot system. Topics studied include robot safety, controls and basic programming. The students will learn robotic program development.

Develop a strong understanding of the robot control system. Topics studied include creating and editing robot frames, branching and system IO and program control.

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

Applies the principles of industrial control systems. Students learn the fundamentals of operating various industrial control systems including open/closed loop servo-hydraulics and PID control systems.

Introduces the principles of motion control. Multi-axis CNC machines are operated using G-Code programming and CAM software. Servo motors, stepper motors and feedback devices are studied using hands on lab activities.

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

Analyze advanced concepts of direct and alternating current (DC & AC) and expand the knowledge of electrical circuitry. Various equipment will be studied that converts AC to DC and also that inverts DC to AC. The effects of varying frequency on AC filter circuits will be explored through labs. The usage of various voltage regulators will be also be covered. IET 5 expands on concepts learned in IET 1, IET 2, and IET 3 and will continue to be expanded upon in IET 6.

Apply advanced concepts involving digital electronics and electronic devices. Operational characteristics of advanced digital circuits will be explored and analyzed. Project based labs will allow learners to demonstrate an understanding of digital integrated circuits including combinational logic, counter circuits and storage circuits. IET 6 expands on IET 3 and IET 5.

Focuses on developing effective listening techniques and verbal and nonverbal communication skills through oral presentation, group activity, and other projects. The study of self, conflict, and cultural contexts will be explored, as well as their impact on communication.  Keywords: Oral, Oral Comm, Comm, Speech

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.