Industry Workplace Safety 10620172

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

Machine Control 3: Sensors And Machine Safety 10620153

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

Mechanical Systems 2: Power Transmission Systems 10620158

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

PLC 2: Timers, Counters And Program Control 10620165

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

Electromechanical Troubleshooting 10620173

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

Industrial Motors 1: Electric Motors 10620159

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

Machine Control 2: Motor And Actuator Control 10620152

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

Mechanical Systems 1: Basic Machine Components 10620157

Introduces how machines work and basic mechanical power transmission system components.

Machine Control 1: Ladder Logic Fundamentals 10620151

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

Gas Metal Arc Welding 3: Spray Transfer 10442185

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Weld Inspection & Testing 10442163

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

Weld Print Reading 1: Basic Views And Dimensions 10442181

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

Shielded Metal Arc Welding 1: E7018 10442192

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Shielded Metal Arc Welding 2: E6010, E7018 10442193

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

Gas Metal Arc Welding 6: Sheet Metal 10442205

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

Introduction To Welding 10442101

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

Welding Safety 10442172

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

Thermal Cutting 10442173

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

Weld Print Reading 2: Other Views And Symbols 10442182

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

Industrial Electronics Technology 4 - Electrical Systems 10660126

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

Intro To Microcontrollers 10660121

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

Electrical Fabrication 10660118

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

Fluid Power Systems 1: Fundamentals 10612120

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

Welding Fabrication Techniques 3: Production Welding 10442191

Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

Welding Fabrication Techniques 1: International Weld Symbols 10442189

This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

Gas Tungsten Arc Welding 4: Aluminum 10442200

Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

Proficient Salon Services 31502109

Provide services to guests at Studio Max, under supervision of an instructor. A full menu of services will be provided. Analyze time management on service timing and manage efficient salon flow. Safety and infection control will be practiced throughout this course.

Metallurgy 32420119

Develop knowledge in science of metals and alloys. The crystalline structure and microstructure of metals and their effect on the properties of metals are studied. Prime consideration is given to heat treatment operations dealing with ferrous metals. Explore non-destructive testing of different metals along with destructive testing methods.

Solidworks 1 10606133

Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

Design & Presentation Techniques 1 10614119

Explores the theory of design and its application in the world of architecture. Focuses learners’ skills of creating and thinking within the architectural field. Examines critical elements of design theory, sketching application, and space planning. Develops skills in visualization, modeling, presentation drawings, floor plans and exterior compositions. Prepares learners to be able to discuss projects in architectural terms with appropriate professional vocabulary.

Transition To Trainer: Your Role As A Journey Worker 47455455

In this workshop you will be introduced to a new set of basic tools - the tools of a job site trainer. You will explore the skills that are necessary to be an effective trainer, discover how to deliver hands-on training, and examine the process for giving useful feedback.

Press Systems 10204182

Analyzes offset, digital, flexographic and large format printing as learners work on projects within an individual and team environment. Four-color process and the PMS color system along with other printing concepts will be explained. Learners should take Introduction to Printing (10-204-112) before this course, or have prior knowledge of the printing industry.

Understanding Substance Use 10550201

Explore the bio-psych social dynamics of substance use. Examine treatment approaches, models, and screening criteria. Examine substances of abuse, history of SUDs, and their impact on the individual and society.

Respiratory Clinical 5 10515183

Focuses on the completion of respiratory therapy competencies and transition to employment. Emphasis is placed on promotion of evidence-based practice using established clinical practice guidelines and published research for its relevance to patient care.   

Group Facilitation 10550204

An introduction to theory and practice of group dynamics and processes. Includes ethical considerations, effective group leadership, and stages of group development. Also includes demonstration of group facilitation skills, clinical documentation, co-facilitation strategies, reflective practitioner techniques, and group formation.

Layout & Welding Fabrication 2 10442143

Expands on skills developed in Layout & Welding Fabrication 1. Learners design, plan, layout, and fabricate functional capstone projects. Integration of computer aided drafting, laser cutting, metal forming and robotic welding is emphasized. Learners conduct peer evaluation of cost, design and mechanical function.

Automotive Service Experience 1 10602208

Demonstrate shop practices. Learners will practice vehicle maintenance on live customers vehicles. Emphasis on quality control of repairs, time management, techniques of customer communication (verbal and written), estimate planning, and meeting deadlines. Focus will be on first semester content.

Mine Safety 47449412

This course is provided by MSHA approved instructors and covers 8 complete hours of Mine Health and Safety topics including first aid, current MSHA changes, miners' rights and other relevant topics. Attendees will come from the mining industry, suppliers, vendors and contractors to the mining industry, logistics companies that do truck driving at mine sites, gravel pits, quarries, and companies that do excavation at mine sites for aggregate.

BLS (Basic Life Support) Skills Lab 47531509

This course has 2 components: an online portion and an instructor-led classroom portion. You must complete the online portion first. This course covers adult, child and infant CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years.

SDS & Adhesives And Sealants For MMMP Trade (C-14) 50423723

Course compares adhesives and sealant types and applications. Then apprentice skills will be developed related to applying adhesives and sealants to repair applications, interpreting MSDS information, and handling hazardous materials.

Babysitting Certification 47531506

This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

Menu Planning, Management And Design 10316112

Plan and prepare menus for a variety of food operations and budgets. Projects will include designing, pricing and menu analysis.

Digital Manufacturing & Design 10465194

CNC Router 2 10465189

Couplings & Alignment For The MMMP Trade (M-2) 50423731

Course compares different coupling types and examines common misalignment problems. Apprentices will develop skills related to inspecting, troubleshooting, and preparing couplings for removal and installation, and also aligning and lubricating couplings.

Nursing Assistant 30543300

Prepares learners to perform basic nursing skills under the supervision of a nurse for job entry as a nursing assistant or a home health aide (HHA) in health care agencies. Face-to-face and hybrid classroom, campus lab and clinical instruction are offered at various nursing homes and hospitals throughout the district. Students need to submit an application and complete background check.

Group Dynamics 42818415

Group Dynamics is an alcohol/drug education course for those persons convicted of operation while intoxicated (OWI) and who are identified as irresponsible users of alcohol and/or drugs by an assessment agency. The main goal of this course is to develop an individualized plan to modify or eliminate inappropriate behaviors and attitudes related to drinking and driving. This course is open only to those who have had a court-ordered assessment from an approved assessment agency.

Gears, Gearboxes, Gear Assemblies For The MMMP Trades (M-5) 50423734

Course compares gear types and applications. Apprentices will develop skills inspecting gear assemblies, troubleshooting gear problems, removing gears and components, and reassembling gear drive systems.

Equipment Installation For The MMMP Trades (m-8) 50423737

Apprentices will layout equipment installations, plan for moving equipment, and set and level equipment.

Heartsaver First Aid/CPR/AED 47531475

Heartsaver 1st Aid, CPR/AED training which includes adult, child and infant. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

Medical Assistant Practicum 31509310

Requires medical assistant students to integrate and apply knowledge and skills from all previous medical assistant courses in actual ambulatory health care settings. Learners perform medical assistant administrative, clinical, and laboratory duties under the supervision of trained mentors to effectively transition to the role of a medical assistant. This is a supervised, unpaid, clinical experience.