Welding For Apprentices 47442443

This course highlights the similarities in equipment and technique between the major arc welding processes. Students complete introductory level competencies in the GMAW, SMAW, FCAW, and GTAW processes. Material preparation skills include shearing, sawing, grinding, and thermal cutting. This course is 40 hours for apprenticeship programs.

Welding Pipefitting 2 31442304

Develops skills in Oxy-fuel cutting (OAC), and Shielded Metal Arc Welding (SMAW). Learners use the OAC process to cut steel and the SMAW process in 1F, 1G, 2F, 2G, 3F and 3G position on steel. Required welds include fillet and groove welds. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

Hazardous Materials Operations 10503203

Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

Hazardous Materials Operations 47503780

Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1001, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.

Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

Gas Metal Arc Welding 6: Sheet Metal 10442205

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

Fire Fighter 1 Practical Exam 98FIREA

Practical skills testing for Fire Fighter 1 state certification.

Candidate Physical Ability Test (CPAT) - Full Session 98FIREJ

The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.

Fire Fighter II Practical Exam 98FIREB

Practical skills testing for Fire Fighter II state certification.

Welding Fabrication Techniques 1: International Weld Symbols 10442189

This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

Principles Of Emerg Svcs Safety & Survival 10503192

Introduces the basic principles and history related to the national firefighter life safety initiatives, focusing on the need for cultural and behavior change throughout the emergency services.

Building Construction For Fire Protection 10503143

Provides the components of building construction related to firefighter and life safety. The elements of construction and design of structures are shown to be key factors when inspecting buildings, preplanning fire operations, and operating at emergencies.

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Weld Print Reading 2: Other Views And Symbols 10442182

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

Weld Print Reading 1: Basic Views And Dimensions 10442181

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

Thermal Cutting 10442173

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

Welding Safety 10442172

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

Weld Inspection & Testing 10442163

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

Introduction To Welding 10442101

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

Gas Tungsten Arc Welding 4: Aluminum 10442200

Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Shielded Metal Arc Welding 2: E6010, E7018 10442193

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Shielded Metal Arc Welding 1: E7018 10442192

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 3: Spray Transfer 10442185

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Welding Fabrication Techniques 3: Production Welding 10442191

Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

Certified Fire Inspector 47503750

Fire Fighting Principles 10503142

Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

Certified Fire Fighter 1 47503720

This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.

Welding Metallurgy 10442165

Investigates the effects of welding on the mechanical properties of metals. Learners explore hardness, strength, and weldability of various metals. Concepts are applied in various activities, including heat treating, hardness testing and tensile testing.

Intro To Welding CNC Applications 10442111

Introduces fundamental concepts of CNC programming as related to metal fabrication. Learners apply concepts by creating and running simple programs with a welding robot, thermal shape-cutting system, and a press brake.

Fire Apparatus Driver Operator - Aerial 47503747

This 36-hour course prepares the participant to be able to perform aerial fire apparatus driving, positioning, operating and testing functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the Fire Apparatus Driver/Operator- Pumper course. This course is designed to provide the Driver/Operator-Aerial candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1002, Standard for Fire Apparatus Driver/Operator Professional Qualifications, Chapters 4 and 6.

Layout & Welding Fabrication 1 10442140

Applies metal fabrication concepts in individual and small group projects. Learners design, plan, layout and fabricate functional projects. Layout tools and methods, along with fixtures, are employed to create precise, repeatable parts to industry standards.

Robotic Welding Applications 2 10442206

Applies the fundamental skills developed in Robotic Welding Applications 1 to functional parts needed for manufacturing. Learners will create and implement fixtures to optimize efficiency and repeatability. They will also utilize a programmable robotic welding positioner to replicate "real-world" production, as well as explore other systems used in our local industry. Learners will also investigate the science associated with welding as they explore techniques, variables, properties of filler metals and shielding mediums related to weld integrity.

Driver/Operator - Aerial Practical Exam 98FIREG

Practical skills testing for Driver/Operator-Aerial state certification.

Driver/Operation - Pumper Practical Exam 98FIREF

Practical skills testing for Driver/Operator-Pumper state certification.

Certified Fire Officer I 47503763

This 40 hour course prepares the participant to perform fire fighting supervisor functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Fighter II JPRs of NFPA 1001, Standard for Fire Fighter Professional Qualification, Chapter 6, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer I Level. Completion of the 40 hour Emergency Services Instructor I course is also required in order to become certified as Fire Officer I. This course is designed to provide the Fire Officer I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 4. Curriculum for the course is based on the Jones & Bartlett, Fire Officer Principles and Practice, 4th Edition (ISBN: 978-1284172393). A written and practical skills certification exam is available to participants who successfully complete this course.