All NTC campuses are closed and classes are cancelled March 16 due to inclement weather. To report an emergency occurring on campus or affecting the College, please contact the NTC Security Office at 715.803.1111 or 911.
Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.
Provides the components of building construction related to firefighter and life safety. The elements of construction and design of structures are shown to be key factors when inspecting buildings, preplanning fire operations, and operating at emergencies.
The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.
The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.
This 40 hour course prepares the participant to perform fire fighting supervisor/manager functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Officer 1 JPRs of NFPA 1021, Standard for Fire Fighter Professional Qualifications, Chapter 4, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer II Level. This course is designed to provide the Fire Officer II candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 5.
This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.
This 40-hour course prepares the participant to perform fire instruction duties at a minimum nationally recognized level. (This course was formerly known as Fire Instructor I). This course is designed to provide the Emergency Services Instructor I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1041, Standard for Fire Service Instructor Professional Qualifications, Chapter 4.
Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.
This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition.
Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)
Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.
Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.
Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications
Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1010, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1010, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.
Introduces the basic principles and history related to the national firefighter life safety initiatives, focusing on the need for cultural and behavior change throughout the emergency services.
