Hazardous Materials Operations 10503203

Prepares the participant to perform the minimum hazardous material incident operations associated with firefighting functions. Meets operational level competencies referenced in the JPRs in NFPA 1001 - Standard for Fire Fighter Professional Qualifications

Hazardous Materials Operations 47503780

Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1001, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.

Candidate Physical Ability Test (CPAT) - Test Out 98FIREH

The Candidate Physical Ability Test (CPAT) - Test Out is for a ONE-TIME try to challenge the CPAT course. Acknowledgment and waiver of CPAT orientation and/or conditioning period and/or timed practice runs will need to submitted.

Electrical Fabrication 10660118

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

Industrial Electronics Technology 6 - Advanced Digital Concepts 10660128

Apply advanced concepts involving digital electronics and electronic devices. Operational characteristics of advanced digital circuits will be explored and analyzed. Project based labs will allow learners to demonstrate an understanding of digital integrated circuits including combinational logic, counter circuits and storage circuits. IET 6 expands on IET 3 and IET 5.

Fire Fighter 1 Practical Exam 98FIREA

Practical skills testing for Fire Fighter 1 state certification.

Candidate Physical Ability Test (CPAT) - Full Session 98FIREJ

The Candidate Physical Ability Test (CPAT) - Full Session includes the orientation, two (2) timed course practices and a CPAT test. During the orientation session, we will explain the testing process and how the equipment works. You will have the chance to ask questions and try the testing equipment. The pass rate of those who attend the orientations is higher than for those who do not, so it is highly recommended that you attend at least one of these orientations. The two practice tests are the same and we attempt to run the practice test under actual testing conditions. If the test is run under actual testing conditions and you successfully complete the test this is considered a PASS and you will not need to attend any further testing.

Fire Fighter II Practical Exam 98FIREB

Practical skills testing for Fire Fighter II state certification.

Intro To Microcontrollers 10660121

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

Industrial Electronics Technology 5 - Advanced Electrical Characteristics 10660127

Analyze advanced concepts of direct and alternating current (DC & AC) and expand the knowledge of electrical circuitry. Various equipment will be studied that converts AC to DC and also that inverts DC to AC. The effects of varying frequency on AC filter circuits will be explored through labs. The usage of various voltage regulators will be also be covered. IET 5 expands on concepts learned in IET 1, IET 2, and IET 3 and will continue to be expanded upon in IET 6.

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

Principles Of Emerg Svcs Safety & Survival 10503192

Introduces the basic principles and history related to the national firefighter life safety initiatives, focusing on the need for cultural and behavior change throughout the emergency services.

Building Construction For Fire Protection 10503143

Provides the components of building construction related to firefighter and life safety. The elements of construction and design of structures are shown to be key factors when inspecting buildings, preplanning fire operations, and operating at emergencies.

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

Industrial Electronics Technology 4 - Electrical Systems 10660126

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

Certified Fire Inspector 47503750

Fire Fighting Principles 10503142

Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

Certified Fire Fighter 1 47503720

This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.

Fire Apparatus Driver Operator - Aerial 47503747

This 36-hour course prepares the participant to be able to perform aerial fire apparatus driving, positioning, operating and testing functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the Fire Apparatus Driver/Operator- Pumper course. This course is designed to provide the Driver/Operator-Aerial candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1002, Standard for Fire Apparatus Driver/Operator Professional Qualifications, Chapters 4 and 6.

Driver/Operator - Aerial Practical Exam 98FIREG

Practical skills testing for Driver/Operator-Aerial state certification.

Driver/Operation - Pumper Practical Exam 98FIREF

Practical skills testing for Driver/Operator-Pumper state certification.

Certified Fire Officer I 47503763

This 40 hour course prepares the participant to perform fire fighting supervisor functions at a minimum nationally recognized level. The targeted audience is individuals who have completed the training required to meet the Fire Fighter II JPRs of NFPA 1001, Standard for Fire Fighter Professional Qualification, Chapter 6, and desire, or are required to increase their knowledge and skills to progress to the Fire Officer I Level. Completion of the 40 hour Emergency Services Instructor I course is also required in order to become certified as Fire Officer I. This course is designed to provide the Fire Officer I candidate with the information needed to meet the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1021, Standard for Fire Officer Professional Qualifications, Chapter 4. Curriculum for the course is based on the Jones & Bartlett, Fire Officer Principles and Practice, 4th Edition (ISBN: 978-1284172393). A written and practical skills certification exam is available to participants who successfully complete this course.

Advanced Firefighter Concepts 10503160

Builds upon the foundation laid in Fire Fighting Principles as well as adds new concepts such as vehicle extrication, flammable liquids fire, technical rescue and incident command. This course will meet the requirements of NFPA 1001 for Firefighter 2 level.

Firefighter II Certification 47503730

This 42-hour course prepares the participant to perform firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1001, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the job performance requirements (JPRs) in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition. Prerequisite Courses: 47503720 (Cert FF1) and 47503780 (Haz Mat Operations)

Hazardous Materials Operations 47503785

Prepares the participant to be able to perform the minimum hazardous material incident operations associated with firefighting functions at an advanced nationally recognized level under general supervision. The targeted audience is individuals who have completed the training required to meet the Fire Fighter I JPRs in NFPA 1010, and desire to increase their knowledge and skills base to the next level. This course is designed to provide the Fire Fighter II candidate with the information needed to meet the operational level competencies for the hazardous material first responder as referenced in the job performance requirements (JPRs) in National Fire Protection Association (NFPA) 1010, Standard for Fire Fighter Professional Qualifications, Chapter 4, 4-1.1. It is based on the National Fire Academy (NFA) Initial Response to Hazardous Materials Incidents: Basic Concepts and Initial Response to Hazardous Materials Incidents: Concepts Implementation curriculums.