Fluid Power Systems 1: Fundamentals 10612120

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

Industrial Electronics Technology 4 - Electrical Systems 10660126

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Weld Print Reading 2: Other Views And Symbols 10442182

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

Weld Print Reading 1: Basic Views And Dimensions 10442181

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

Thermal Cutting 10442173

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

Welding Safety 10442172

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

Weld Inspection & Testing 10442163

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

Introduction To Welding 10442101

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

Gas Metal Arc Welding 6: Sheet Metal 10442205

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

Shielded Metal Arc Welding 2: E6010, E7018 10442193

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Shielded Metal Arc Welding 1: E7018 10442192

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Gas Metal Arc Welding 3: Spray Transfer 10442185

Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

Industry Workplace Safety 10620172

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

Machine Control 3: Sensors And Machine Safety 10620153

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

Mechanical Systems 2: Power Transmission Systems 10620158

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

PLC 2: Timers, Counters And Program Control 10620165

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

Electromechanical Troubleshooting 10620173

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

Industrial Motors 1: Electric Motors 10620159

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

Machine Control 2: Motor And Actuator Control 10620152

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

Machine Control 1: Ladder Logic Fundamentals 10620151

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

Mechanical Systems 1: Basic Machine Components 10620157

Introduces how machines work and basic mechanical power transmission system components.

Intro To Microcontrollers 10660121

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

Electrical Fabrication 10660118

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

Welding Fabrication Techniques 3: Production Welding 10442191

Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

Welding Fabrication Techniques 1: International Weld Symbols 10442189

This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

Certified Fire Inspector 47503750

Critical Care Paramedic Refresher 47531500

Provides the continuing education required for renewing the Critical Care endorsement for the Wisconsin Department of Health Services (DHS). Provides the necessary training for awareness of critical care equipment and assessment tools needed to care for a patient during the mobile transition from ground care to an acute care setting. Reviews the basic principles of critical care transport including pharmacology, monitoring, lab values, and ventilation.

NREMT AEMT Refresher 47531502

Provides the State of Wisconsin Advanced Emergency Medical Technician (AEMT) the continuing education required for renewing the provider's license at Wisconsin Department of Health Services (DHS) and renewing the National Registry certification. This program follows the AEMT National Continued Competency Program (NCCP) curriculum. The NCCP is provided by the National Registry of Emergency Medical Technicians.

NREMT EMT Refresher 47531503

Provides the State of Wisconsin Emergency Medical Technician (EMT) thecontinuing education required for renewing the provider's license at Wisconsin Department of Health Services (DHS) and renewing the National Registry certification. This program follows the EMT National Continued Competency Program (NCCP) curriculum. The NCCP is provided by the National Registry ofEmergency Medical Technicians.

NREMT EMR Refresher (16hr) 47531513

Upon successful completion of the EMR (Emergency Medical Responder) Refresher course, the learner will be eligible to renew their WI State License and renew their National Registry Certification.

NREMT Paramedic Refresher 47531501

Provides the State of Wisconsin Paramedic the continuing education required for renewing the provider's license at Wisconsin Department of Health Services(DHS} and renewing the National Registry certification. This program follows the Paramedic National Continued Competency Program (NCCP) curriculum. The NCCP is provided by the National Registry of Emergency Medical Technicians.

Intermediate Algebra W/Apps 10804118

This course offers algebra content with applications and an introduction to functions and complex numbers. Content builds upon the arithmetic of real numbers by using variable equations to solve problems. Topics include graphing and finding algebraic solutions for linear equations and inequalities, quadratic, exponential, polynomial, radical, and rational equations.

General Chemistry 10806134

Introduces the fundamentals of chemistry. Topics include the metric system, problem-solving, periodic relationships, chemical reactions, chemical equilibrium, properties of water; acids, bases and salts; and gas laws. Keywords: Chem, Chemistry

Servo Systems 1: Fundamentals Of Industrial Control Systems 10620161

Applies the principles of industrial control systems. Students learn the fundamentals of operating various industrial control systems including open/closed loop servo-hydraulics and PID control systems.

Nursing Advanced Skills 10543112

This course focuses on the development of advanced clinical skills across the lifespan. Content includes advanced intravenous skills, blood product administration, chest tube systems, basic electrocardiogram interpretation and nasogastric/feeding tube insertion.

Gourmet Foods 10316118

Utilizing the culinary skills learned throughout the program, learners will create high-end foods utilizing a variety of cooking techniques. Emphasis will be on presentation, flavors, cooking skills and time management as learners work in a production environment.

Radiography Clinical 2 10526192

This second level clinical course continues to prepare radiography students to perform radiologic procedures on patients with considerable direct and limited indirect supervision. Students apply radiation protection and standard precautions in the production of radiographic images in a health care setting while adhering to legal and ethical guidelines. An emphasis of the course is the development of communication and critical thinking skills appropriate to the clinical setting.

Respiratory Disease 10515176

Exploration of signs, symptoms, causes, progression, and treatment of diseases or disorders of the body that affect the respiratory cardiopulmonary system. Emphasis is placed on promotion of evidence-based practice using established clinical practice guidelines and published research for its relevance to patient care.

Respiratory Neo/Peds Care 10515180

Provides a comprehensive orientation to the field of neonatal and pediatric respiratory care to include fetal development, birth, neonatal physiology, pulmonary dynamics, abnormal cardiopulmonary conditions, diseases, noninvasive and invasive therapeutic interventions. Emphasis is placed on promotion of evidence-based practice using established clinical practice guidelines and published research for its relevance to patient care.

Radiographic Image Analysis 10526195

Prepares radiography students to analyze radiographic images for quality. Students apply quality control tests to determine the causes of image problems including equipment malfunctions and procedural errors.

Radiation Protection And Biology 10526197

Prepares radiography students to protect themselves and others from exposure to radioactivity. Students examine the characteristics of radiation and how radiation affects cell biology. Students apply standards and guidelines for radiation exposure.

Portfolio Preparation 10204129

Develops a professional portfolio of work for use in job search and acquisition. Learners create physical and digital portfolios for professional marketing and job search. Learners examine job search processes, produce a resume, develop interview skills, investigate industry work ethics and standards and participate in mock interviews.

Intro To Clinical Care Management 10543108

This clinical experience applies nursing concepts and therapeutic nursing interventions to groups of patients across the lifespan. It also provides an introduction to leadership, management, and team building.

Microbiology 10806197

Investigates historical perspectives of microbiology, microscopy, characteristics of procaryotic and eucaryotic microorganisms, control of microbial growth, microbial genetics, and classification of microorganisms, principles of disease, epidemiology, immunology and pathogenic microbiology. Keywords: Micro, Microbio

Portfolio Preparation For Video Production 10206159

Develops a professional portfolio of video work for use in job search and acquisition. Learners create video reels, online portfolios and content for job search, and personal and professional marketing. Learners examine job search processes, produce a CV or Resume, develop interview skills, understand avenues for project funding, navigate film festival protocol and investigate video industry work ethics and standards.

Capstone CELL Integration 10664107

Focuses on integration of a complete automated manufacturing cell. Typical components include programmable controllers, robot, sensors, drives, conveyors, pneumatics, hard automation, control wiring and vision systems. Students plan, wire, program, troubleshoot and develop an automated manufacturing process based on the “product” chosen by the group. All required programming and documentation for the entire automation system is required

Industry 4.0 Fundamentals 10664112

Introduces the concepts of Industry 4.0 and the key aspects that workers will need to be prepared for in the intelligent factory setting. Robotic automation, smart manufacturing, and Artificial Intelligence (AI) concepts will be explored.

Professional Fitness 10504152

Prepares learners for meeting LESB entry requirements for fitness. Learners will focus on nutrition and mental and physical wellness.

Report Documentation 10504178

Develops a variety of law enforcement reports, utilizing field notes to accurately and fairly convey necessary information for use by investigators, prosecutors and the public.

Careers And The Criminal Justice System 10504151

Analyzes the primary functions of federal, state and local law enforcement and corrections agencies. Learners prepare for employment in public and private sectors.

Traffic Investigation 10504181

Investigates traffic crashes to determine cause.  Learners utilize traffic incident management and investigative principles to complete investigations and necessary follow up to determine appropriate level of enforcement. Learners prepare documentation including Wisconsin Motor Vehicle Accident Report, Uniform Traffic Citation, photographs and drawings.  Learners administer field sobriety tests and interpret indicators of impaired driving.

Juvenile Justice And Jurisdiction 10504186

Utilizes Wisconsin Statutes to conduct in-depth studies in juvenile law. Areas of concentration are crimes against children, children in need of protection and services, and the juvenile justice code. Analyzes the role of law enforcement and other agencies in responding to and investigating juvenile procedures. Methods and models of prevention and rehabilitation are evaluated.

Fire Fighting Principles 10503142

Emphasizes basic fire behavior, techniques used to control structural and related fire emergencies and life safety practices. Learners perform all practical evolutions necessary to control and extinguish fires and otherwise meet all requirements for Firefighter 1 certification with the state of Wisconsin.

Producing Products In An Intelligent Factory 10664118

Builds upon the Designing a Solution in a SMART Factory course, by allowing the learner to implement their design and produce product effectively and efficiently utilizing SMART manufacturing equipment & concepts. This course will produce products in an intelligent factory lab along with providing the learners opportunities for problem solving in a live manufacturing environment.

Cemented Aggregate Mixtures 10607103

Introduces learners to cemented aggregate mixtures including important elements such as: aggregate properties; concrete mix design methods; hot mix asphalt mixes; inspection and testing concepts; field quality control and verification testing methods; safety during material sampling; material sampling procedures; and use of random sampling.

Surveying 2 10607105

Builds on surveying concepts including these important skills: computations and field methods involved in traversing; area calculations; field work to collect information for survey maps and engineering designs, including control point creation and topographic surveys; and an overview of the global navigation satellite system.

Intermediate Civil 3D 10607104

Expands on learner’s knowledge of Civil 3D by providing skills in surface creation, utilizing existing survey data and break lines generated with automatic linework generation tools, developing a clear understanding on how Civil 3D surfaces are generated, as a basis for future design. Learners will then work on establishing an alignment and profile to use in a corridor model that will aid them in generating a design surface that they can utilize as a useful tool (such as cutting cross sections, determining earthwork volumes, and generating plans that could be used during construction and bidding). Learners will also get introductory exposure to feature lines, grading objects, and utility tools within the Civil 3D software.

Specifications And Commercial Project Management 10614190

Strengthens learners’ knowledge and skills necessary to effectively coordinate managerial and technical aspects of commercial construction projects through commercial print reading, permitting, construction documentation, means and methods of commercial construction, and project supervision.  Upon graduation learners will possess skills in problem solving, critical thinking, and communication, as well as technical and conceptual application of commercial project administration, contracts, scheduling, finance, and safety.

Construction Estimating 2 10614112

Strengthens the learners' understanding of the procedures employed in estimating construction materials and labor costs for new and remodeling construction systems pertaining to application, sizing, plan layout and code application. Learners analyze and interpret plans and specifications, explore the use of estimating tables, and develop material lists utilizing estimating software.

Interviews/Interrogations 10504142

Develops skills in interviewing crime victims, witnesses and suspects. Provides role play experience in interviewing and interrogation techniques for a variety of offenses, including sexual assault, robbery, theft, battery and other types of criminal offenses.

Sketchup For Architectural Design 10614129

Explores Trimble's SketchUp as a design and visualization tool. Develops learners' skills in creating realistic computer models that can be used to create full color renderings, animations, exported/imported AutoCAD files for construction drawings and Layout as a construction documentation tool.

Dental Chairside 31508302

Prepares dental assistant students to chart oral cavity structures, dental pathology and restorations and to assist a dentist with basic dental procedures including examinations, pain control, amalgam restoration and cosmetic restoration. Students will also develop the ability to educate patients about preventive dentistry, brushing and flossing techniques and dental procedures, using lay terminology.

Dental Hygiene Ethics & Profes 10508107

Helps student dental hygienists develop and apply high professional and ethical standards. Students apply the laws that govern the practice of dental hygiene to their work with patients, other members of a dental team and the community. Emphasis is placed on maintaining confidentiality and obtaining informed consent. Students enhance their ability to present a professional appearance.

Dental Hygiene Process 1 10508105

Introduces Dental Hygiene students to the basic technical/clinical skills required of practicing Dental Hygienists including use of basic dental equipment, examination of patients and procedures within the dental unit. Under the direct supervision of an instructor, students integrate hands-on skills with entry-level critical thinking and problem-solving skills. The course also reinforces the application of Dental Health Safety skills.

Dental Hygiene Process 2 10508106

This clinical course builds on and expands the technical/clinical skills student dental hygienists began developing in Dental Hygiene Process 1. Under the direct supervision of an instructor, students apply patient care assessment, planning, implementation, and evaluation skills to provide comprehensive care for calculus case type 1 and 2 patients and perio case patients.

Nutrition And Dental Health 10508110

Prepares student dental hygienists to counsel patients about diet and its impact on oral health. Students learn to distinguish between balanced and unbalanced diets and to construct diets that meet the needs of patients with compromised dental/oral health. Students also learn to counsel patients about the effect of eating disorders on dental health.

Dental Hygiene Transition Into Practice 10508130

This course prepares the learner or graduate for licensure. Simulated written and practical examinations. Individualized study plans, stress/test anxiety management strategies, and dental hygiene license obtainment are addressed. Course goal is to strengthen learner performance on written board and clinical practical examinations. No challenge test available.

Dental Hygiene Process 4 10508117

This clinical course builds on and expands the technical/clinical skills student dental hygienists developed in Dental Hygiene Process III. With feedback from the instructor, students manage all aspects of cases in the course of providing comprehensive care for calculus case type 0, 1, 2, and 3 patients and for perio case type 0 I, II, and III patients. Emphasizes maximization of clinical efficiency and effectiveness. Prepares student dental hygienists to demonstrate their clinical skills in a formal examination situation.

Intro To Ethics: Theory & App 10809166

This course provides a basic understanding of the theoretical foundations of ethical thought. Diverse ethical perspectives will be used to analyze and compare relevant issues. Students will critically evaluate individual, social and/or professional standards of behavior and apply a systematic decision-making process to these situations. Keywords: Ethics