Displaying 601 - 700 of 721 No filters currently applied.

PLC 2: Timers, Counters And Program Control 10620165

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$188.79

    Tire Service 10602203

  • 1.00 credits
  • Autotec
  • $181.29

    • Prepares learners for fundamental tire repair procedures. Emphasis on mounting and balancing tires, service and repair of tire pressure monitoring systems (TPMS), basic tire leak detection methods and repairs, and basic suspension inspection procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Basic Vehicle Maintenance 10602201

  • 2.00 credits
  • Autotec
  • $362.58

    • Perform vehicle maintenance and repair. Focus will be on thread repair, oil change, tire rotations, and TPMS (Tire Pressure Monitor System) relearn procedures.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$362.58

    Automotive Service Safety 10602200

  • 1.00 credits
  • Autotec
  • $181.29

    • Describe the automotive service facility. Safety, the use of basic hand and power tools, and hoist training helps the prospective automobile technician work safely and efficiently.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$188.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    12:00 PM - 03:00 PM
    H129 - Classroom - H Building
    Matt Jacobson
    		$188.79

    Industrial Motors 1: Electric Motors 10620159

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$188.79
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I110 - Classroom - I Building
    Benjamin Knospe
    Apr 27 – May 20
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$188.79

    Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$188.79

    Machine Control 2: Motor And Actuator Control 10620152

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$188.79

    PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$188.79

    Mechanical Systems 1: Basic Machine Components 10620157

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces how machines work and basic mechanical power transmission system components.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$188.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    09:00 AM - 11:50 AM
    I110 - Classroom - I Building
    Bryan Schroder
    		$188.79

    Weld Print Reading 1: Basic Views And Dimensions 10442181

  • 1.00 credits
  • Welding
  • $241.29

    • Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of fabrication equipment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Weld Print Reading 2: Other Views And Symbols 10442182

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 3: Spray Transfer 10442185

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use spray transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding
  • $241.29

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

  • 1.00 credits
  • Welding
  • $241.29

    • Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 6: Sheet Metal 10442205

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Introduction To Welding 10442101

  • 1.00 credits
  • Welding
  • $241.29

    • Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    Mar 23 – May 21
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    		$241.29

    Weld Inspection & Testing 10442163

  • 1.00 credits
  • Welding
  • $241.29

    • Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H136 - Welding Lab - H Building
    Robert Leafblad
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Welding Safety 10442172

  • 1.00 credits
  • Welding
  • $241.29

    • Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Thermal Cutting 10442173

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 4: Pulsed Spray Transfer 10442186

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding
  • $241.29

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #02 Spring
    Open
    03/25/2026 –
    04/09/2026
    		In-Person Wausau Main Campus
    Mar 25 – Apr 9
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    3 Course Sections
    3 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #01 Spring
    Open
    04/13/2026 –
    04/22/2026
    		In-Person Wausau Main Campus
    Apr 13 – Apr 22
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Apr 13 – Apr 22
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    04/14/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Apr 14 – Apr 23
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29
    #01 Spring
    Open
    04/27/2026 –
    05/06/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 6
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Apr 27 – May 6
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding
  • $241.29

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

  • 1.00 credits
  • Welding
  • $241.29

    • Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/21/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 21
    -
    H127 - Computer Lab - H Building
    Robert Leafblad
    		$241.29

    Scada Systems 1 10664106

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Organize and develop FactoryTalk View Site Edition (SE) applications. This course provides opportunities for learners to organize and develop FactoryTalk View SE applications. During class, learners will have the opportunity to practice the skills used to create/build graphic displays. Learners will learn how to configure alarms and security, trend data, and test their application using FactoryTalk View SE Client. Learners will also work with RSLinx Enterprise communications software

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Scada Systems 2 10664111

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Continuation of SCADA Systems 1, learners will organize and develop FactoryTalk View Site Edition (SE) network/server-based application. Learners will have the opportunity to practice the skills needed to create/build detailed graphic displays, trend charts and data logs. Learners will learn how to configure alarms and set up system security, build data logs, and test their application using FactoryTalk View SE Network Distributed Application.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Advanced Drive Applications 10664108

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Program drive parameters for a drive application. This course will teach students how to create a custom parameter group based upon drive applications. Throughout this course, the instructor will cover a range of topics from establishing communications with a PowerFlex 525 drive via a USB connection and Ethernet/IP network to test parameters of a PowerFlex 525 drive and control a drive in STUDIO 5000.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Effa
    		$200.04

    Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 4 - Electrical Systems 10660126

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79

    Collaborative Robots And Vision 10664115

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Focuses on the concept of programming and using vision guided robotic systems. Both remote hard mounted vision systems and robot mounted vision systems will be introduced. Learners will learn how to create vision programs and configure the robot to work with the camera system to allow storage and bin picking applications. Both 2D and 3D camera systems will be introduced.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Intro To Microcontrollers 10660121

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$173.79

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$173.79
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I104A - AME Lab - I Building
    Bryan Schroder
    Apr 27 – May 20
    Monday, Wednesday
    08:00 AM - 10:50 AM
    I110 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Industrial Applications 10664103

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Explores two main topic areas: PLC and HMI machine applications. The learner will demonstrate the ability to learn to program a PLC they have not worked with before as well as an HMI they have not worked with before. The learner will integrate the study of curriculum, technical manuals, help files and previous knowledge to demonstrate their ability to learn new technology. Learner will develop several PLC applications and several HMI applications integrated with the PLC.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Ethernet IP 10664100

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Explore the design and troubleshooting of Ethernet/IP networks. Topics introduce students to integrating Ethernet networking communications, architectures, protocols, and security. Students will learn through hands-on lab activities covering setting up communication systems, networking configurations, and troubleshooting techniques.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Human Machine Interfacing 10664102

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Explores the fundamentals of Human Machine Interface (HMI) software and hardware. Students will learn about configuring communication with programmable controllers and project settings. Students will create and edit displays, browse tags and/or global objects and connections. Additional topics include trending, data logging, alarms, and animations.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Needs Analysis 10664104

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Introduces the concept of looking at a current outdated automation process or future automation process and understanding how to correctly specify the hardware components that will be used to update the machine or process with today’s automation technology. The concept of creating and writing a project proposal will also be covered.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Fluid Power Systems 1: Fundamentals 10612120

  • 1.00 credits
  • Fluid Power Technology
  • $171.29

    • Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Benjamin Knospe
    		$171.29

    Remote Io For PLC Applications 10664109

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Learn what remote IO is and how to implement a POINT I/O system. The course will cover determining the quantity and type of I/O needed to test your system. This course will also show students how to calculate power requirements and decide whether an expansion power supply will be needed. Students will also add and configure an Ethernet adapter and I/O modules in a Studio 5000 Logix Designer project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Matt Jacobson
    		$200.04

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    12:00 PM - 02:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Bryan Schroder
    		$173.79

    Introduction To Safety PLC Programming 10664110

  • 1.00 credits
  • Automation Systems Technology
  • $200.04

    • Introduces the concept of setting up and programming various safety devices including GuardMaster Smart sensors, Programmable safety relays and safety PLC’s, The course will focus on how to setup, program and integrate safety components into your automation project.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/23/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 23 – May 22
    -
    I104A - AME Lab - I Building
    Dustin Van De Weerd
    		$200.04

    Proficient Salon Services 31502109

  • 3.00 credits
  • Barber/Cosmetology
  • $532.62

    • Provide services to guests at Studio Max, under supervision of an instructor. A full menu of services will be provided. Analyze time management on service timing and manage efficient salon flow. Safety and infection control will be practiced throughout this course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Wednesday
    08:00 AM - 12:00 PM
    F110 - Salon Lab - F Building
    Kayla Ackerman
    Mar 24 – May 21
    Thursday, Wednesday
    12:30 PM - 04:00 PM
    F110 - Salon Lab - F Building
    Kayla Ackerman
    Mar 24 – May 21
    Tuesday
    08:00 AM - 01:15 PM
    F110 - Salon Lab - F Building
    Kayla Ackerman
    		$532.62

    Metallurgy 32420119

  • 1.00 credits
  • Machine Shop
  • $215.04

    • Develop knowledge in science of metals and alloys. The crystalline structure and microstructure of metals and their effect on the properties of metals are studied. Prime consideration is given to heat treatment operations dealing with ferrous metals. Explore non-destructive testing of different metals along with destructive testing methods.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    07:00 AM - 08:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		$215.04

    Solidworks 1 10606133

  • 1.00 credits
  • Mechanical Technology
  • $171.29

    • Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 19
    Tuesday
    01:00 PM - 03:50 PM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$171.29

    Design & Presentation Techniques 1 10614119

  • 2.00 credits
  • Architectural Technology
  • $347.58

    • Explores the theory of design and its application in the world of architecture. Focuses learners’ skills of creating and thinking within the architectural field. Examines critical elements of design theory, sketching application, and space planning. Develops skills in visualization, modeling, presentation drawings, floor plans and exterior compositions. Prepares learners to be able to discuss projects in architectural terms with appropriate professional vocabulary.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    08:30 AM - 11:50 AM
    F212 - Classroom/Computer Lab - F Building
    Travis Severson
    		$347.58

    Marketing Principles 10104172

  • 3.00 credits
  • Marketing Business-to-business
  • $503.87

    • Introduces an understanding of basic marketing fundamentals. The learner will explore consumer demographics, lifestyles and decision making; evaluate product distribution; promotions and price planning. The learner will create a Strategic Marketing Plan combining the components listed and develop a presentation.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    03/24/2026 –
    05/19/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 24 – May 19
    Tuesday
    09:00 AM - 11:50 AM
    A211 - Classroom - A Building
    Dianne Carroll
    		$503.87

    Applied Mechanics For Technicians 10606111

  • 3.00 credits
  • Mechanical Technology
  • $556.54

    • Develop a thorough understanding of the statics and mechanics principles that are of paramount importance for learners in the engineering and technical programs. Mechanics is the branch of physical science that deals with state of rest or motion under the action of forces. Mechanics is the foundation for most engineering sciences and an indispensable prerequisite to most engineering or technical courses. In this course, you will develop a thorough understanding of the statics and mechanics principles that are of paramount importance for students in the engineering and technical programs. You will then apply these mechanics principles in various assignments and projects.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    03/24/2026 –
    05/22/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 24 – May 22
    Tuesday, Wednesday, Thursday, Friday
    09:00 AM - 10:50 AM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$556.54

    Welding Fabrication Techniques 3: Production Welding 10442191

  • 1.00 credits
  • Welding
  • $241.29

    • Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Transition To Trainer: Your Role As A Journey Worker 47455455

  • 0.20 credits
  • Supervision Management
  • $99.00

    • In this workshop you will be introduced to a new set of basic tools - the tools of a job site trainer. You will explore the skills that are necessary to be an effective trainer, discover how to deliver hands-on training, and examine the process for giving useful feedback.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD005 Spring
    Open
    03/24/2026
    		In-Person Wausau Main Campus
    Mar 24
    Tuesday
    08:00 AM - 04:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Joseph Dziedzic
    		$99.00

    Press Systems 10204182

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Analyzes offset, digital, flexographic and large format printing as learners work on projects within an individual and team environment. Four-color process and the PMS color system along with other printing concepts will be explained. Learners should take Introduction to Printing (10-204-112) before this course, or have prior knowledge of the printing industry.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/25/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    01:00 PM - 02:50 PM
    H109 - Mac Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H111 - Printing Lab - H Building
    Andrew Somers
    Mar 25 – May 21
    Thursday, Wednesday
    09:00 AM - 11:50 AM
    H109 - Mac Lab - H Building
    Andrew Somers
    		$555.12

    Cisco 3 - Network Communications 3 10150187

  • 3.00 credits
  • IT - Network Specialist
  • $510.12

    • Examines the architecture, components, operations, and security for large, complex networks, including wide area network (WAN) technologies. Learners will configure, troubleshoot, and secure enterprise network devices and understand how application programming interfaces (API) and configuration management tools enable network automation. Learners will configure and troubleshoot OSPFv2, ACLs, NAT, and QoS on IPv4 and IPv6 networks.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    03/25/2026 –
    05/20/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    01:00 PM - 04:50 PM
    A105 - IT Computer Lab - A Building
    Josh Kretzschmar
    		$510.12

    Network Capstone 10150506

  • 3.00 credits
  • IT - Network Specialist
  • $510.12

    • Utilizes multiple operating systems, multiple hardware platforms and a variety of network devices and tools to build a functional network infrastructure. Learners will perform enterprise level network monitoring and will resolve common network problems using troubleshooting methodologies. Learners utilize the skills and knowledge they have gained throughout the IT Network Specialist program.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    03/25/2026 –
    05/20/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    08:00 AM - 11:50 AM
    A105 - IT Computer Lab - A Building
    Josh Kretzschmar
    		$510.12

    Understanding Substance Use 10550201

  • 3.00 credits
  • Substance Use Disorder Counseling
  • $503.87

    • Explore the bio-psych social dynamics of substance use. Examine treatment approaches, models, and screening criteria. Examine substances of abuse, history of SUDs, and their impact on the individual and society.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/25/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    01:00 PM - 04:50 PM
    A239 - Classroom - A Building
    Christina Lucas
    		$503.87

    Accounting 2 10101113

  • 4.00 credits
  • Accounting
  • $670.16

    • Expands on the accounting concepts presented in Accounting 1. Introduces the learner to fixed assets, intangible assets, current and payroll liabilities, partnerships, corporations, bonds, the statement of cash flows, and financial statement analysis.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02AYW Spring
    Open
    03/25/2026 –
    05/20/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    12:00 PM - 03:50 PM
    A122 - IT Lab - A Building
    Sydney Fritzel
    		$670.16

    Management Principles 10196191

  • 3.00 credits
  • Supervision & Leadership Dev
  • $503.87

    • Gain knowledge and develop the expertise necessary to apply the tools needed to perform essential supervisory and managerial functions. Learners will develop the ability to provide timely and constructive feedback, evaluate and improve performance, conduct performance appraisals, conduct employee mentoring, provide workforce training and coaching, communicate effectively and create a motivating environment. Each learner will: demonstrate the application of important management and supervisory roles including planning, organizing, staffing, leading, controlling, analysis, delegation, problem-solving, decision-making, team development, leadership, motivation, training and staff development.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03AYW Spring
    Open
    03/25/2026 –
    05/20/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 25 – May 20
    Wednesday
    05:00 PM - 06:30 PM
    A239 - Classroom - A Building
    Kurt Swanson
    		$503.87

    Group Facilitation 10550204

  • 3.00 credits
  • Substance Use Disorder Counseling
  • $503.87

    • An introduction to theory and practice of group dynamics and processes. Includes ethical considerations, effective group leadership, and stages of group development. Also includes demonstration of group facilitation skills, clinical documentation, co-facilitation strategies, reflective practitioner techniques, and group formation.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 26 – May 21
    Thursday
    01:00 PM - 04:50 PM
    A239 - Classroom - A Building
    Christina Lucas
    Mar 26 – May 21
    Thursday
    01:00 PM - 04:50 PM
    A241 - Helping Skills Lab - A Building
    Christina Lucas
    		$503.87

    Microeconomics 10809143

  • 3.00 credits
  • Social Science
  • $503.87

    • Examines the behavior of individual decision makers, primarily consumers and firms. Topics include choices of how much to consume and to produce, the functioning of perfectly and imperfectly competitive markets, the conditions under which markets may fail, and arguments for and against government intervention. The student applies the fundamental tools of economics to real world problems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/26/2026 –
    05/21/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 26 – May 21
    Thursday
    09:00 AM - 11:50 AM
    A216 - Classroom - A Building
    Sarah Watson
    		$503.87

    Solidworks 3 10606183

  • 2.00 credits
  • Mechanical Technology
  • $340.08

    • Complete various projects utilizing intermediate and advanced SolidWorks skills. Upon completion the student will take the CSWA or Certified SolidWorks Exam to gain industry credentials. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03AYW Spring
    Open
    03/26/2026 –
    05/21/2026
    		Attend Your Way Online Available Wausau Main Campus
    Mar 26 – May 21
    Thursday
    01:00 PM - 03:50 PM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$340.08

    Layout & Welding Fabrication 2 10442143

  • 2.00 credits
  • Welding
  • $482.58

    • Expands on skills developed in Layout & Welding Fabrication 1. Learners design, plan, layout, and fabricate functional capstone projects. Integration of computer aided drafting, laser cutting, metal forming and robotic welding is emphasized. Learners conduct peer evaluation of cost, design and mechanical function.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #1 Spring
    Open
    03/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 26 – May 21
    Thursday
    07:00 AM - 02:30 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$482.58

    Automotive Service Experience 1 10602208

  • 1.00 credits
  • Autotec
  • $181.29

    • Demonstrate shop practices. Learners will practice vehicle maintenance on live customers vehicles. Emphasis on quality control of repairs, time management, techniques of customer communication (verbal and written), estimate planning, and meeting deadlines. Focus will be on first semester content.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #90 Spring
    Open
    03/26/2026 –
    05/22/2026
    		In-Person Open Labs Wausau Main Campus
    Mar 26 – May 22
    -
    H112 - Red Auto Lab - H Building
    Ross Nevienski
    		$181.29

    Mine Safety 47449412

  • 0.20 credits
  • Industrial Safety
  • $89.00

    • This course is provided by MSHA approved instructors and covers 8 complete hours of Mine Health and Safety topics including first aid, current MSHA changes, miners' rights and other relevant topics. Attendees will come from the mining industry, suppliers, vendors and contractors to the mining industry, logistics companies that do truck driving at mine sites, gravel pits, quarries, and companies that do excavation at mine sites for aggregate.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Spring
    Open
    03/26/2026
    		In-Person Wausau Main Campus
    Mar 26
    Thursday
    08:00 AM - 04:00 PM
    A165 - WTPD Innovation Classroom A - A Building
    WTPD Contracts
    		$89.00

    BLS (Basic Life Support) Skills Lab 47531509

  • 0.05 credits
  • Emergency Medical Services
  • $30.00

    • This course has 2 components: an online portion and an instructor-led classroom portion. You must complete the online portion first. This course covers adult, child and infant CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD020 Spring
    Open
    03/30/2026
    		In-Person Wausau Main Campus
    Mar 30
    Monday
    05:00 PM - 07:00 PM
    A162 - CPR Classroom - A Building
    Paige Thoune
    		$30.00

    SDS & Adhesives And Sealants For MMMP Trade (C-14) 50423723

  • 0.25 credits
  • Millwright
  • $43.21

    • Course compares adhesives and sealant types and applications. Then apprentice skills will be developed related to applying adhesives and sealants to repair applications, interpreting MSDS information, and handling hazardous materials.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/31/2026
    		In-Person Wausau Main Campus
    Mar 31
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$43.21

    Babysitting Certification 47531506

  • 0.20 credits
  • Emergency Medical Services
  • $71.00

    • This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD035 Spring
    Open
    04/02/2026
    		In-Person Wausau Main Campus
    Apr 2
    Thursday
    08:00 AM - 03:00 PM
    A162 - CPR Classroom - A Building
    Andrea Lerch
    		$71.00
    #PD036 Spring
    Open
    04/25/2026
    		In-Person Wausau Main Campus
    Apr 25
    Saturday
    08:00 AM - 03:00 PM
    A162 - CPR Classroom - A Building
    Paige Thoune
    		$71.00

    Menu Planning, Management And Design 10316112

  • 1.00 credits
  • Culinary Arts
  • $171.29

    • Plan and prepare menus for a variety of food operations and budgets. Projects will include designing, pricing and menu analysis.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/06/2026 –
    04/30/2026
    		In-Person Wausau Main Campus
    Apr 6 – Apr 23
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 08:30 AM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    Apr 27 – Apr 30
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 11:00 AM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    		$171.29

    Couplings & Alignment For The MMMP Trade (M-2) 50423731

  • 1.00 credits
  • Millwright
  • $160.35

    • Course compares different coupling types and examines common misalignment problems. Apprentices will develop skills related to inspecting, troubleshooting, and preparing couplings for removal and installation, and also aligning and lubricating couplings.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/06/2026 –
    05/18/2026
    		In-Person Wausau Main Campus
    Apr 6
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Apr 20
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 4
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 18
    Monday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$160.35

    Group Dynamics 42818415

  • 0.60 credits
  • Group Dynamics
  • $311.50

    • Group Dynamics is an alcohol/drug education course for those persons convicted of operation while intoxicated (OWI) and who are identified as irresponsible users of alcohol and/or drugs by an assessment agency. The main goal of this course is to develop an individualized plan to modify or eliminate inappropriate behaviors and attitudes related to drinking and driving. This course is open only to those who have had a court-ordered assessment from an approved assessment agency.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD015 Spring
    Open
    04/07/2026 –
    05/26/2026
    		In-Person Wausau Main Campus
    Apr 7 – May 26
    Tuesday
    05:30 PM - 08:30 PM
    A216 - Classroom - A Building
    Kathleen Hackel
    		$311.50

    Gears, Gearboxes, Gear Assemblies For The MMMP Trades (M-5) 50423734

  • 0.75 credits
  • Millwright
  • $120.26

    • Course compares gear types and applications. Apprentices will develop skills inspecting gear assemblies, troubleshooting gear problems, removing gears and components, and reassembling gear drive systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/08/2026 –
    04/22/2026
    		In-Person Wausau Main Campus
    Apr 8 – Apr 22
    Wednesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$120.26

    Equipment Installation For The MMMP Trades (m-8) 50423737

  • 0.75 credits
  • Millwright
  • $120.26

    • Apprentices will layout equipment installations, plan for moving equipment, and set and level equipment.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/09/2026 –
    05/07/2026
    		In-Person Wausau Main Campus
    Apr 9
    Thursday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Apr 23
    Thursday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 7
    Thursday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$120.26

    Advanced Chassis Systems 10602230

  • 2.00 credits
  • Autotec
  • $362.58

    • Develops the skills needed to diagnose and repair automotive advanced driver assistance systems (ADAS), electronic steering and electronic suspension systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/13/2026 –
    04/29/2026
    		In-Person Wausau Main Campus
    Apr 13 – Apr 29
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$362.58

    BLS (Basic Life Support) CPR 47531437

  • 0.10 credits
  • Emergency Medical Services
  • $40.00

    • This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD086 Spring
    Open
    04/13/2026
    		In-Person Wausau Main Campus
    Apr 13
    Monday
    05:30 PM - 09:30 PM
    A162 - CPR Classroom - A Building
    Andrea Hebert
    		$40.00

    Pumps For The MMMP Trades (M-3) 50423732

  • 0.75 credits
  • Millwright
  • $120.26

    • Course compares different pump types and their applications. Apprentices will complete a field inspection of pumps and learn how to troubleshoot, remove, overhaul, install and perform preventative maintenance on pumps.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/14/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Apr 14
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Apr 28
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 12
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$120.26

    Powerpoint Level 1 10103241

  • 1.00 credits
  • Microcomputers
  • $171.29

    • Introduces learners to the basic concepts of using Microsoft PowerPoint with hands-on, project based activities. Learners will develop foundational skills by applying concepts explored to create new presentations, adding and formatting slides, navigating a slide show, inserting images/backgrounds, adding transitions, adding animations and working with charts, WordArt and tables.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02AYW Spring
    Open
    04/14/2026 –
    05/14/2026
    		Attend Your Way Online Available Wausau Main Campus
    Apr 14 – May 14
    Thursday, Tuesday
    09:00 AM - 10:50 AM
    A235 - Computer Lab - A Building
    Carrie Heckendorf
    		$171.29

    CPR Instructor Course 47531471

  • 0.20 credits
  • Emergency Medical Services
  • $70.00

    • American Heart Association CPR instructor course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD002 Spring
    Open
    04/14/2026
    		In-Person Wausau Main Campus
    Apr 14
    Tuesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$70.00

    Heartsaver First Aid/CPR/AED 47531475

  • 0.15 credits
  • Emergency Medical Services
  • $61.00

    • Heartsaver 1st Aid, CPR/AED training which includes adult, child and infant. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD039 Spring
    Open
    04/16/2026
    		In-Person Wausau Main Campus
    Apr 16
    Thursday
    04:30 PM - 09:30 PM
    A162 - CPR Classroom - A Building
    Andrea Lerch
    		$61.00

    Welding For MMMP Trades (C-6) 50423715

  • 0.75 credits
  • Millwright
  • $120.26

    • Course compares common welding processes and develops apprentice skills related to welding, cutting, heating and using oxy-gas. Welding with arc, MIG and TIG is included, along with common cutting and joining techniques.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/17/2026 –
    05/08/2026
    		In-Person Wausau Main Campus
    Apr 17
    Friday
    07:30 AM - 04:00 PM
    H136 - Welding Lab - H Building
    Ryan Vobornik
    Apr 17
    Friday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 1
    Friday
    07:30 AM - 04:00 PM
    H136 - Welding Lab - H Building
    Ryan Vobornik
    May 1
    Friday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 8
    Friday
    07:30 AM - 04:00 PM
    H136 - Welding Lab - H Building
    Ryan Vobornik
    May 8
    Friday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$120.26

    Alignment 10602214

  • 1.00 credits
  • Autotec
  • $181.29

    • Explains operation and diagnosis of wheel alignment concerns and adjustments. Students will be performing vehicle inspections and wheel alignments.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/20/2026 –
    04/28/2026
    		In-Person Wausau Main Campus
    Apr 20 – Apr 28
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    Zach Knetter
    		$181.29

    Object-Oriented Programming C 10152506

  • 1.00 credits
  • IT - Programmer/analyst
  • $171.29

    • Explores object-oriented programming concepts and C# .NET syntax and features, with a focus on iterative development and testing. This course uses a variety of resources including Unified Modeling Language (UML) diagrams to present design principles and concepts. Learners will create console and GUI C# .NET applications which incorporate n-tier design principles and object-oriented design principles and patterns, emphasizing the use of composition over inheritance, interfaces and polymorphism. Additional topics include: file access and serialization, delegates, anonymous methods, lambda expressions, and LINQ.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    04/20/2026 –
    05/22/2026
    		Attend Your Way Online Available Wausau Main Campus
    Apr 20 – May 22
    Wednesday
    05:00 PM - 06:50 PM
    A122 - IT Lab - A Building
    Zachary Thunder
    		$171.29

    Programming Concepts C 10152503

  • 1.00 credits
  • IT - Programmer/analyst
  • $171.29

    • Emphasizes programming concepts and standards, building on the object-oriented approach of 10-152-502 Programming Concepts B, with a focus on iterative development and testing. This course uses C# .NET, the Unified Modeling Language (UML) and other tools to present concepts from a variety of perspectives. Learners will create UML diagrams and write/debug C# .NET applications, applying the object-oriented basics of abstraction, encapsulation, inheritance.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02AYW Spring
    Open
    04/20/2026 –
    05/22/2026
    		Attend Your Way Online Available Wausau Main Campus
    Apr 20 – May 22
    Wednesday
    10:00 AM - 11:50 AM
    A108 - Computer Lab - A Building
    Dominic Gruetzmacher
    		$171.29

    Programming Concepts B 10152502

  • 1.00 credits
  • IT - Programmer/analyst
  • $171.29

    • Reinforces programming concepts and standards, building on the object-oriented approach introduced in 10-152-501 Programming Concepts A, with a focus on iterative development and testing. This course uses C# .NET, the Unified Modeling Language (UML) and other tools to present concepts from a variety of perspectives. Learners will create UML diagrams and write/debug C# .NET applications, applying the object-oriented basics of abstraction and encapsulation. Additional topics include: utilization of a debugger, object multiplicity and constructors.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02AYW Spring
    Open
    04/20/2026 –
    05/22/2026
    		Attend Your Way Online Available Wausau Main Campus
    Apr 20 – May 22
    Wednesday
    01:00 PM - 02:50 PM
    A108 - Computer Lab - A Building
    Dominic Gruetzmacher
    		$171.29

    Servo Systems 3: Advanced Position Control And Integration 10620163

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Advanced servo integration is accomplished using industrial servo drives and programmable logic controllers. Servo gearing and camming is studied through hands-on activities. Learners solve real world servo related problems using advanced PLC and Servo programming.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    02:00 PM - 04:50 PM
    I104A - AME Lab - I Building
    Matt Jacobson
    Apr 27 – May 20
    Monday, Wednesday
    02:00 PM - 04:50 PM
    I110 - Classroom - I Building
    Matt Jacobson
    		$188.79

    PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/27/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 20
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I110 - Classroom - I Building
    Benjamin Effa
    Apr 27 – May 20
    Monday, Wednesday
    11:00 AM - 01:50 PM
    I104A - AME Lab - I Building
    Benjamin Effa
    		$188.79