Displaying 1 - 92 of 92 No filters currently applied.

4WD / AWD Systems 10602228

  • 1.00 credits
  • Autotec
  • $181.29

    • Diagnosis and repair of  four wheel drive/all wheel drive and drivelines. Students develop these skills in a classroom and lab setting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/02/2026 –
    03/10/2026
    		In-Person Wausau Main Campus
    Mar 2 – Mar 10
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$181.29

    ACLS - Advanced Cardiac Life Support 47531440

  • 0.40 credits
  • Emergency Medical Services
  • $149.00

    • Medical professionals who respond to cardiovascular emergencies in and out of the hospital enhance their treatment knowledge and skills through the AHA’s ACLS training courses.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD024 Summer
    Open
    06/08/2026 –
    06/09/2026
    		In-Person Wausau Main Campus
    Jun 8 – Jun 9
    Monday, Tuesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    Janet Abell
    		$149.00
    #PD025 Fall
    Open
    08/11/2026 –
    08/12/2026
    		In-Person Wausau Main Campus
    Aug 11 – Aug 12
    Tuesday, Wednesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    Michelle Lipke
    		$149.00

    Advanced Cardiac Life Support Refresher (ACLS) 47531461

  • 0.20 credits
  • Emergency Medical Services
  • $79.00

    • Refresher course for ACLS.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD012 Summer
    Open
    06/23/2026
    		In-Person Wausau Main Campus
    Jun 23
    Tuesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    		$79.00
    #PD013 Fall
    Open
    10/06/2026
    		In-Person Wausau Main Campus
    Oct 6
    Tuesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    Michelle Lipke
    		$79.00

    Advanced Chassis Systems 10602230

  • 2.00 credits
  • Autotec
  • $362.58

    • Develops the skills needed to diagnose and repair automotive advanced driver assistance systems (ADAS), electronic steering and electronic suspension systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/13/2026 –
    04/29/2026
    		In-Person Wausau Main Campus
    Apr 13 – Apr 29
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$362.58

    Advanced CNC Machining Centers 2 32420117

  • 3.00 credits
  • Machine Shop
  • $645.12

    • Optimizes machining concepts to produce parts non-traditional CNC equipment. This course will teach the learner to machine more complex parts, hold closer tolerances, add skills which can increase efficiency while using alternative machining methods.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/24/2026 –
    03/19/2026
    		In-Person Wausau Main Campus
    Feb 24 – Mar 19
    Monday, Tuesday, Wednesday
    07:00 AM - 01:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    Feb 24 – Mar 19
    Thursday
    07:00 AM - 10:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		$645.12

    AHA Instructor Renewal 47531510

  • 0.05 credits
  • Emergency Medical Services
  • $30.00

    • American Heart Association Instructor renewals, for BLS, ACLS and PALS.

    8 Course Sections
    8 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD022 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$30.00
    #PD023 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    05:00 PM - 07:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$30.00
    #PD024 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$30.00
    #PD025 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$30.00
    #PD026 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$40.00
    #PD027 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$40.00
    #PD028 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$40.00
    #PD029 Spring
    Open
    05/05/2026
    		In-Person Wausau Main Campus
    May 5
    Tuesday
    02:00 PM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$50.00

    Alignment 10602214

  • 1.00 credits
  • Autotec
  • $181.29

    • Explains operation and diagnosis of wheel alignment concerns and adjustments. Students will be performing vehicle inspections and wheel alignments.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/20/2026 –
    04/28/2026
    		In-Person Wausau Main Campus
    Apr 20 – Apr 28
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    Zach Knetter
    		$181.29

    Application of Investigations 30504502

  • 1.00 credits
  • Criminal Justice
  • $181.29

    • Through classroom lecture, on-campus lab, and WI Department of Justice 720 Academy integration exercises students will learn and apply skills addressed in the following Phase III topics of the Department of Justice 720 Academy curriculum framework: Ethics II: Moral Reasoning and Professional Conduct, Cultural Competence II, Interrogations, Testifying in Court, Crimes III and Physical Evidence Collection.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/27/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Mar 27 – May 12
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 07:00 PM
    Wausau Main Campus
    Matthew Kecker
    		$181.29

    Application of Traffic Response 30504507

  • 3.00 credits
  • Criminal Justice
  • $543.87

    • Through classroom lecture, and on-campus lab and WI Department of Justice integration exercises, students will learn and apply skills addressed in the following Phase III topics from the WI Department of Justice 720 Academy curriculum framework: Traffic Law Enforcement - Core and Radar, Traffic Crash Investigations & Incident Management, Operating a Motor Vehicle While Intoxicated (OMVWI), Standardized Field Sobriety Tests (SFST), Hazardous Materials and Weapons of Mass Destruction (WMD), Incident Command Systems and NIMS, and Report Writing.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/27/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Mar 27 – May 12
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 07:00 PM
    Wausau Main Campus
    Koua Thao
    		$543.87

    Applied Mechanics For Technicians 10606111

  • 3.00 credits
  • Mechanical Technology
  • $556.54

    • Develop a thorough understanding of the statics and mechanics principles that are of paramount importance for learners in the engineering and technical programs. Mechanics is the branch of physical science that deals with state of rest or motion under the action of forces. Mechanics is the foundation for most engineering sciences and an indispensable prerequisite to most engineering or technical courses. In this course, you will develop a thorough understanding of the statics and mechanics principles that are of paramount importance for students in the engineering and technical programs. You will then apply these mechanics principles in various assignments and projects.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01AYW Spring
    Open
    03/24/2026 –
    05/22/2026
    		Hybrid Online Available Wausau Main Campus
    Mar 24 – May 22
    Tuesday, Wednesday, Thursday, Friday
    09:00 AM - 10:50 AM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$556.54

    Automatic Transmission Systems 10602229

  • 2.00 credits
  • Autotec
  • $362.58

    • Diagnose and repair automatic transmissions and transaxles for automobiles and light trucks. The course stresses care and use of shop equipment hand tools, databases and the application of safe shop practices. 

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/16/2026 –
    04/08/2026
    		In-Person Wausau Main Campus
    Mar 16 – Apr 8
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$362.58

    Battery, Starting And Charging Systems 10602211

  • 2.00 credits
  • Autotec
  • $362.58

    • Diagnose and repair automotive electrical and electronic systems. Applying knowledge of wiring diagrams along with manufactures descriptions and diagnostic procedures, Learners perform and evaluate testing and repairs on today’s computer controlled starting, charging, and battery systems.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/13/2026 –
    02/26/2026
    		In-Person Wausau Main Campus
    Feb 13 – Feb 26
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    Zach Knetter
    		$362.58

    Beginning Sign Language 47533500

  • 0.30 credits
  • Interpreter Technology
  • $69.00

    • Students enrolling in this course will learn basic techniques for communicating with the Deaf and Hard of Hearing persons, including fundamentals of sign language skill development--all in a fun and relaxed environment!

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Spring
    Waitlist
    03/03/2026 –
    04/07/2026
    		In-Person Wausau Main Campus
    Mar 3 – Apr 7
    Tuesday
    06:00 PM - 08:00 PM
    A165 - WTPD Innovation Classroom A - A Building
    Christine Kawski
    		$69.00

    BLS (Basic Life Support) CPR 47531437

  • 0.10 credits
  • Emergency Medical Services
  • $40.00

    • This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD085 Spring
    Open
    03/17/2026
    		In-Person Wausau Main Campus
    Mar 17
    Tuesday
    05:30 PM - 09:30 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$40.00

    BLS (Basic Life Support) CPR Refresher 47531438

  • 0.10 credits
  • Emergency Medical Services
  • $35.00

    • This American Heart Association approved course is a refresher for those already meeting requirements for CPR as a Healthcare Provider. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD052 Spring
    Open
    03/24/2026
    		In-Person Wausau Main Campus
    Mar 24
    Tuesday
    06:00 PM - 09:00 PM
    A162 - CPR Classroom - A Building
    Andrea Lerch
    		$35.00

    Board Prep 31502128

  • 2.00 credits
  • Barber/Cosmetology
  • $355.08

    • Examine and review all state board required procedures and theoretical-based material. Prepare for state board examination with multiple theory based examinations and practice for practical procedures. Conclude the course with a practical and written assessment of all state board subjects. Prepare and submit materials for state board exams.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 23 – May 19
    Tuesday
    02:00 PM - 03:30 PM
    A227 - Classroom - A Building
    Kayla Ackerman
    Mar 23 – May 19
    Monday
    12:30 PM - 04:00 PM
    A227 - Classroom - A Building
    Kayla Ackerman
    Mar 23 – May 19
    Monday
    08:00 AM - 12:00 PM
    A227 - Classroom - A Building
    Kayla Ackerman
    		$355.08

    Body Electrical 1 10602215

  • 2.00 credits
  • Autotec
  • $362.58

    • Diagnose and repair electrical and electronic systems, emphasizing proper diagnostic routines. Learners will perform and evaluate tests and repairs on electrical and electronic accessories including Horns, Wipers, Blower Motor, Heated Elements, power locks, seats, and windows.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/04/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    May 4 – May 20
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    Zach Knetter
    		$362.58

    Clutches 10602227

  • 1.00 credits
  • Autotec
  • $181.29

    • Diagnosis and repair of clutches. Students develop these skills in a classroom and lab setting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/19/2026 –
    02/26/2026
    		In-Person Wausau Main Campus
    Feb 19 – Feb 26
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$181.29

    CPR Instructor Course 47531471

  • 0.20 credits
  • Emergency Medical Services
  • $70.00

    • American Heart Association CPR instructor course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD002 Spring
    Open
    04/14/2026
    		In-Person Wausau Main Campus
    Apr 14
    Tuesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$70.00

    Culinary Skills Project 10316128

  • 1.00 credits
  • Culinary Arts
  • $241.29

    • Assess the learner on skills learned throughout the first year of the Culinary Arts program.  The learner will complete various culinary and sanitation skills in a timed environment.  

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/04/2026 –
    05/14/2026
    		In-Person Wausau Main Campus
    May 4 – May 14
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 12:30 PM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    		$241.29

    Design & Presentation Techniques 1 10614119

  • 2.00 credits
  • Architectural Technology
  • $347.58

    • Explores the theory of design and its application in the world of architecture. Focuses learners’ skills of creating and thinking within the architectural field. Examines critical elements of design theory, sketching application, and space planning. Develops skills in visualization, modeling, presentation drawings, floor plans and exterior compositions. Prepares learners to be able to discuss projects in architectural terms with appropriate professional vocabulary.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    08:30 AM - 11:50 AM
    F212 - Classroom/Computer Lab - F Building
    Travis Severson
    		$347.58

    Drilling Machines For Machine Trades Apprentice 50420718

  • 0.50 credits
  • Machine Shop
  • $100.80

    • This course focuses on the terminology, construction and operations of drilling machines in the metal-working industry. Be aware that in-depth information regarding cutting tools, hardware and hand tools will be addressed in their own courses. Efforts should be made to reference information found in other courses in order to assist the apprentice in the application and assimilation of information.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/03/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Mar 3
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Mar 17
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Apr 14
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    Apr 28
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    May 12
    Tuesday
    07:00 AM - 11:00 AM
    H121A - Classroom - H Building
    Joseph Bonke
    		$100.80

    Electrical Fabrication 10660118

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/28/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Apr 28 – May 21
    Thursday, Tuesday
    12:00 PM - 02:50 PM
    I112 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Electrical Skill Development 50413508

  • 2.00 credits
  • Electricity
  • $343.20

    • Introduces the apprentice to the layout and purpose of the National Electric Code. It also strives to teach the apprentice proper methodology to research a code question and correctly interpret what they are reading. Various examples in the textbook and activity sheets help guide the apprentice through this process.  Apprentices will research the structure of the National Electric Code and define the requirements of the code that are common to all electrical installations and electrical codes applicable to the trade.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/10/2026 –
    05/05/2026
    		In-Person Wausau Main Campus
    Mar 10 – May 5
    Tuesday
    07:00 AM - 03:30 PM
    H146A - Mechatronics Project Lab - H Building
    James Buck
    Mar 10 – May 5
    Tuesday
    07:00 AM - 03:30 PM
    H131 - Apprentice Classroom - H Building
    James Buck
    		$343.20

    Electromechanical Troubleshooting 10620173

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    08:00 AM - 10:50 AM
    H129 - Classroom - H Building
    Matt Jacobson
    		$188.79

    Engine Service 10602212

  • 2.00 credits
  • Autotec
  • $362.58

    • Develop skills needed to locate, maintain and repair engine leaks and wear conditions. Emphasis is placed on in-vehicle engine repair including timing belt/chain replacement, oil and coolant leak repair, and engine mount replacement.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/02/2026 –
    03/18/2026
    		In-Person Wausau Main Campus
    Mar 2 – Mar 18
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    Zach Knetter
    		$362.58

    Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

  • 1.00 credits
  • Welding
  • $241.29

    • Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    02/05/2026 –
    02/17/2026
    		In-Person Wausau Main Campus
    Feb 5 – Feb 17
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29
    #01 Spring
    Open
    02/09/2026 –
    02/16/2026
    		In-Person Wausau Main Campus
    Feb 9 – Feb 16
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Feb 9 – Feb 16
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29

    Food Safety & Sanitation Certification 47303476

  • 0.30 credits
  • Foods
  • $109.00

    • This state approved course prepares you for the National Restaurant Association Certification examination from the Department of Health and Social Services by providing managers and employees in the food-service industry the knowledge of food-safety procedures. By taking this state approved course and passing the certification examination, you will be eligible to apply for your Certified Food Manager License from the Department of Health and Social Services. The National Restaurant Association certification examination is the third night of the course. Textbook required from the NTC Bookstore.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD009 Spring
    Open
    04/07/2026 –
    04/21/2026
    		In-Person Wausau Main Campus
    Apr 7 – Apr 21
    Tuesday
    08:30 AM - 12:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Rich Neumann
    Apr 21
    Tuesday
    08:30 AM - 12:30 PM
    A107 - IT Computer Lab - A Building
    Rich Neumann
    		$109.00

    Food Safety Recertification Refresher 47303477

  • 0.10 credits
  • Foods
  • $99.00

    • This course prepares students to successfully complete the ServSafe Manager exam with 2 hours of instructor led exam prep and completion of the standardized exam. The course will cover key concepts, regulations, and certification requirements. Note: Due to frequent changes in food safety regulations that are included on the exam, it is strongly recommended that students take the full certification course to ensure successful completion of the exam and license renewal.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD009 Spring
    Open
    04/21/2026
    		In-Person Wausau Main Campus
    Apr 21
    Tuesday
    08:30 AM - 12:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Rich Neumann
    		$99.00

    Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

  • 1.00 credits
  • Welding
  • $241.29

    • Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/16/2026 –
    03/18/2026
    		In-Person Wausau Main Campus
    Mar 16 – Mar 18
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 16 – Mar 18
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    03/17/2026 –
    03/19/2026
    		In-Person Wausau Main Campus
    Mar 17 – Mar 19
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    04/08/2026
    		In-Person Wausau Main Campus
    Mar 23 – Apr 8
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 23 – Apr 8
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    03/25/2026 –
    04/09/2026
    		In-Person Wausau Main Campus
    Mar 25 – Apr 9
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Gas Tungsten Arc Welding 3: Stainless Steel 10442199

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/13/2026 –
    04/22/2026
    		In-Person Wausau Main Campus
    Apr 13 – Apr 22
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Apr 13 – Apr 22
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    04/14/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Apr 14 – Apr 23
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Gas Tungsten Arc Welding 4: Aluminum 10442200

  • 1.00 credits
  • Welding
  • $241.29

    • Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/27/2026 –
    05/06/2026
    		In-Person Wausau Main Campus
    Apr 27 – May 6
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Apr 27 – May 6
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    04/28/2026 –
    05/07/2026
    		In-Person Wausau Main Campus
    Apr 28 – May 7
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

  • 1.00 credits
  • Welding
  • $241.29

    • Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/11/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    May 11 – May 20
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    May 11 – May 20
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    05/12/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    May 12 – May 21
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Group Dynamics 42818415

  • 0.60 credits
  • Group Dynamics
  • $311.50

    • Group Dynamics is an alcohol/drug education course for those persons convicted of operation while intoxicated (OWI) and who are identified as irresponsible users of alcohol and/or drugs by an assessment agency. The main goal of this course is to develop an individualized plan to modify or eliminate inappropriate behaviors and attitudes related to drinking and driving. This course is open only to those who have had a court-ordered assessment from an approved assessment agency.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD015 Spring
    Open
    04/07/2026 –
    05/26/2026
    		In-Person Wausau Main Campus
    Apr 7 – May 26
    Tuesday
    05:30 PM - 08:30 PM
    A216 - Classroom - A Building
    Kathleen Hackel
    		$311.50

    Hybrid Drivetrains 10602231

  • 2.00 credits
  • Autotec
  • $362.58

    • Examine hybrid systems and powertrains. The course will include: safety procedures and practices when working on hybrid components..  Learners will be testing hybrid battery assemblies, measuring high voltage circuits, safely disabling the high voltage for vehicle servicing, and dissembling hybrid drivetrains.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/04/2026 –
    05/20/2026
    		In-Person Wausau Main Campus
    May 4 – May 20
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$362.58

    Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/24/2026 –
    03/19/2026
    		In-Person Wausau Main Campus
    Feb 24 – Mar 19
    Thursday, Tuesday
    12:00 PM - 02:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 24 – Apr 23
    Thursday, Tuesday
    12:00 PM - 02:50 PM
    I110 - Classroom - I Building
    Bryan Schroder
    		$173.79

    Industrial Electronics Technology 6 - Advanced Digital Concepts 10660128

  • 1.00 credits
  • Electronics Foundation
  • $173.79

    • Apply advanced concepts involving digital electronics and electronic devices. Operational characteristics of advanced digital circuits will be explored and analyzed. Project based labs will allow learners to demonstrate an understanding of digital integrated circuits including combinational logic, counter circuits and storage circuits. IET 6 expands on IET 3 and IET 5.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/28/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Apr 28 – May 21
    Thursday, Tuesday
    08:00 AM - 10:50 AM
    I104B - AME Lab - I Building
    Bryan Schroder
    Apr 28 – May 21
    Thursday, Tuesday
    08:00 AM - 10:50 AM
    H129 - Classroom - H Building
    Bryan Schroder
    		$173.79

    International Cuisine 10316125

  • 2.00 credits
  • Culinary Arts
  • $482.58

    • Explores various international cuisines in a professional foodservice setting. Learners will plan menus, prepare and produce the various cuisines and serve.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 23 – May 18
    Monday
    08:00 AM - 02:00 PM
    E112 - Culinary Lab Wausau - E Building
    Jonathan Reinke
    May 19
    Tuesday
    08:00 AM - 02:00 PM
    E112 - Culinary Lab Wausau - E Building
    Jonathan Reinke
    		$482.58

    Intro to CNC Milling 47420450

  • 0.45 credits
  • Machine Shop
  • $75.00

    • Introduces learners to the fundamentals of CNC milling setup and operation. The course focuses on basic familiarity with the CNC milling machine control panel, common tooling, and simple program setup sheets. Learners practice running existing programs and make very simple edits under guidance to produce parts that meet basic print specifications.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Summer
    Open
    06/15/2026 –
    08/11/2026
    		In-Person Wausau Main Campus
    Jun 15 – Jun 23
    Monday, Tuesday
    08:00 AM - 02:30 PM
    H108 - Machine Tool Lab - H Building
    Jeff Block
    Jul 6 – Aug 11
    Monday, Tuesday
    08:00 AM - 02:30 PM
    H108 - Machine Tool Lab - H Building
    Jeff Block
    		$75.00

    Machine Design 2 10606117

  • 3.00 credits
  • Mechanical Technology
  • $510.12

    • Incorporates the concepts learned in Statics and applies them to 3-dimensional applications. The learner will master the basic concepts of fatigue strength, the use of stress concentration factors, de-rating factors and factors of safety in order to compare design loads to material properties of objects in their actual working environment. The learner will understand all aspects of shaft design and will be able to properly account for all considerations when designing these common machine components.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #03AYW Spring
    Open
    03/23/2026 –
    05/21/2026
    		Hybrid Online Available Wausau Main Campus
    Mar 23 – May 21
    Monday, Tuesday, Wednesday, Thursday
    11:00 AM - 12:50 PM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$510.12

    Machine Tool Apprenticeship Greening Competencies - Sage Project 50420732

  • 0.50 credits
  • Machine Shop
  • $100.80

    • Identify recyclable material, in both the solid and liquid form, and understand why these materials need to be recycled and how to properly recycle these materials. Demonstrate the understanding of the information found on SDS documentation and the concept behind the 5's system. Learner will also demonstrate the ability to plan out a job in an efficient and cost effective manner.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/03/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Mar 3
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Mar 17
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Apr 14
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    Apr 28
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    May 12
    Tuesday
    11:30 AM - 03:30 PM
    H121A - Classroom - H Building
    Joseph Bonke
    		$100.80

    Manual Transmission Systems 10602226

  • 2.00 credits
  • Autotec
  • $362.58

    • Diagnosis and repair of manual transmissions/transaxle. Students develop these skills in a classroom and lab setting.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/06/2026 –
    02/18/2026
    		In-Person Wausau Main Campus
    Feb 6 – Feb 18
    Monday, Tuesday, Wednesday, Thursday, Friday
    08:00 AM - 02:30 PM
    H114 - Blue Auto Lab - H Building
    Matthew Klug
    		$362.58

    Meat & Fish Essentials 10316110

  • 3.00 credits
  • Culinary Arts
  • $723.87

    • Identify fish, meat or poultry by carcass, primal, sub primal and fabricated cuts of meat. Learners will explore the use of fish, meats and poultry by comparing both yield grades and quality grades. Hands-on meat fabrication, meat grinding, meat smoking and sausage making will be explored.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/16/2026 –
    04/23/2026
    		In-Person Wausau Main Campus
    Mar 16 – Mar 25
    Monday, Tuesday, Wednesday, Thursday
    08:30 AM - 01:30 PM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    Apr 6 – Apr 23
    Monday, Tuesday, Wednesday, Thursday
    08:30 AM - 01:30 PM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    		$723.87

    Menu Planning, Management And Design 10316112

  • 1.00 credits
  • Culinary Arts
  • $171.29

    • Plan and prepare menus for a variety of food operations and budgets. Projects will include designing, pricing and menu analysis.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/06/2026 –
    04/30/2026
    		In-Person Wausau Main Campus
    Apr 6 – Apr 23
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 08:30 AM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    Apr 27 – Apr 30
    Monday, Tuesday, Wednesday, Thursday
    08:00 AM - 11:00 AM
    E110 - Culinary Lab Wausau - E Building
    Travis Teska
    		$171.29

    Metallurgy 32420119

  • 1.00 credits
  • Machine Shop
  • $215.04

    • Develop knowledge in science of metals and alloys. The crystalline structure and microstructure of metals and their effect on the properties of metals are studied. Prime consideration is given to heat treatment operations dealing with ferrous metals. Explore non-destructive testing of different metals along with destructive testing methods.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    07:00 AM - 08:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		$215.04

    Nonprofit Management Institute (36Hrs) 47196917

  • 0.90 credits
  • Supervision & Leadership Dev
  • $150.00

    • This program will provide learners a foundational understanding of the unique issues faced when managing and operating a non-profit organization. This program is designed for those who work or wish to work in a non-profit setting, particularly for those in management and leadership roles. This program consists of six individual modules: Effective Non-Profit Leadership, Non-Profit Operations Management, Human Resources Essentials, Volunteer Engagement, Branding, PR and Marketing, and Fundraising Fundamentals.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD001 Spring
    Open
    02/10/2026 –
    05/05/2026
    		In-Person Wausau Main Campus
    Feb 10 – May 5
    Tuesday
    08:30 AM - 11:30 AM
    A227 - Classroom - A Building
    Timothy McKeough
    		$150.00

    Nursing Assistant 30543300

  • 3.00 credits
  • Nursing
  • $532.62

    • Prepares learners to perform basic nursing skills under the supervision of a nurse for job entry as a nursing assistant or a home health aide (HHA) in health care agencies. Face-to-face and hybrid classroom, campus lab and clinical instruction are offered at various nursing homes and hospitals throughout the district. Students need to submit an application and complete background check.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #13 Spring
    Waitlist
    03/17/2026 –
    05/12/2026
    		In-Person Medford Off Campus Medford Campus
    Mar 17 – Apr 16
    Thursday, Tuesday
    04:00 PM - 09:00 PM
    M135 - Nursing Lab - Medford Campus
    Karen Simington
    Apr 21 – May 7
    Thursday, Tuesday
    04:00 PM - 09:30 PM
    Medford Off Campus
    Karen Simington
    May 12
    Tuesday
    04:00 PM - 09:00 PM
    M135 - Nursing Lab - Medford Campus
    Karen Simington
    		$532.62

    Packings, Seals, Gaskets For MMMP Trades (C-13) 50423722

  • 0.50 credits
  • Millwright
  • $81.42

    • Apprentices will examine packing, seals and gaskets and compare materials and applications. Then skill in layout, cutting, inspecting, removing and installing these components will be developed.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/03/2026 –
    03/17/2026
    		In-Person Wausau Main Campus
    Mar 3
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Mar 17
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$81.42

    PALS - Pediatric Advanced Life Support 47531439

  • 0.40 credits
  • Emergency Medical Services
  • $149.00

    • The AHA’s PALS Course is for healthcare providers who respond to emergencies in infants and children. The goal of PALS is to improve the quality of care provided to seriously ill or injured children, resulting in improved outcomes.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD023 Fall
    Open
    08/04/2026 –
    08/05/2026
    		In-Person Wausau Main Campus
    Aug 4 – Aug 5
    Tuesday, Wednesday
    08:00 AM - 04:00 PM
    A162 - CPR Classroom - A Building
    Joseph Redding
    		$149.00

    Postpress Operations 10204181

  • 3.00 credits
  • Graphic Communication Tech
  • $555.12

    • Explore current and emerging technologies for postpress operations in bindery and finishing. Learners will perform postpress production on a variety of types of printed products. Learners will also develop skills in job planning from the postpress perspective, paper and paper calculations, quality control in post press, equipment operation and efficiency and productivity in post press.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 23 – May 19
    Monday, Tuesday
    09:00 AM - 11:50 AM
    H123 - Computer Lab - H Building
    Daniel Seanor
    Mar 23 – May 19
    Monday, Tuesday
    01:00 PM - 02:50 PM
    H123 - Computer Lab - H Building
    Daniel Seanor
    Mar 23 – May 19
    Monday, Tuesday
    01:00 PM - 02:50 PM
    H111 - Printing Lab - H Building
    Daniel Seanor
    Mar 23 – May 19
    Monday, Tuesday
    09:00 AM - 11:50 AM
    H111 - Printing Lab - H Building
    Daniel Seanor
    		$555.12

    Precision Machining Processes 1 32420114

  • 3.00 credits
  • Machine Shop
  • $645.12

    • Optimize proficiency development in the application of tooling and processes on the engine lathe, vertical milling machine and surface grinder. Manufacture parts to print specifications while developing problem solving skills. Basic Tool & Die concepts will be utilized during this course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    04/30/2026
    		In-Person Wausau Main Campus
    Mar 23 – Apr 30
    Monday, Wednesday
    07:00 AM - 01:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    Mar 23 – Apr 30
    Tuesday
    09:00 AM - 01:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    Mar 23 – Apr 30
    Thursday
    09:00 AM - 10:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		$645.12

    Precision Machining Processes 2 32420115

  • 2.00 credits
  • Machine Shop
  • $430.08

    • Apply machining concepts to produce parts within an assembly using precision machines. Learners will need to job plan the process in order to produce the parts in an efficient manner.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    05/04/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    May 4 – May 21
    Monday, Wednesday
    07:00 AM - 01:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    May 4 – May 21
    Tuesday
    09:00 AM - 01:50 PM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    May 4 – May 21
    Thursday
    09:00 AM - 10:50 AM
    H115 - Machine Tool Lab/Classroom - H Building
    Jeff Block
    		$430.08

    Principles of Emergency Vehicle Response 30504504

  • 2.00 credits
  • Criminal Justice
  • $362.58

    • Through classroom lecture, and on-campus lab, and WI Department of Justice 720 Academy integration exercises students will learn and apply skills addressed in the following Department of Justice 720 Academy Phase II topics: Emergency Vehicle Operation and Control (EVOC) and Vehicle Contacts II.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/16/2026 –
    03/27/2026
    		In-Person Wausau Main Campus
    Feb 16 – Mar 27
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 07:00 PM
    D128 - CJ Classroom - D Building
    Eric Soberg
    		$362.58

    Principles of Investigations 30504508

  • 1.00 credits
  • Criminal Justice
  • $181.29

    • Through classroom lecture, and on-campus lab, and WI Department of Justice 720 Academy integration exercises students will learn and apply skills addressed in the following Phase II topics of the WI Department of Justice 720 Academy curriculum framework: Constitutional Law II, Physical Evidence Collections, and Crisis Management. The Phase II Written Exam will be given in this course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/16/2026 –
    03/27/2026
    		In-Person Wausau Main Campus
    Feb 16 – Mar 27
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 07:00 PM
    D128 - CJ Classroom - D Building
    Matthew Kecker
    		$181.29

    Principles of Tactics 30504509

  • 5.00 credits
  • Criminal Justice
  • $906.45

    • Through classroom lecture and on-campus lab and integration exercises, students will learn and apply skills addressed in the following Phase II topics from the Department of Justice 720 Academy curriculum frameworks including: Professional Communication Skills II, DAAT, Firearms II, Tactical Response, and Tactical Emergency Critical Care For Law Enforcement Officers.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/16/2026 –
    03/27/2026
    		In-Person Wausau Main Campus
    Feb 16 – Mar 27
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 07:00 PM
    D128 - CJ Classroom - D Building
    Matthew Kecker
    		$906.45

    Proficient Salon Services 31502109

  • 3.00 credits
  • Barber/Cosmetology
  • $532.62

    • Provide services to guests at Studio Max, under supervision of an instructor. A full menu of services will be provided. Analyze time management on service timing and manage efficient salon flow. Safety and infection control will be practiced throughout this course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Wednesday
    08:00 AM - 12:00 PM
    F110 - Salon Lab - F Building
    Kayla Ackerman
    Mar 24 – May 21
    Thursday, Wednesday
    12:30 PM - 04:00 PM
    F110 - Salon Lab - F Building
    Kayla Ackerman
    Mar 24 – May 21
    Tuesday
    08:00 AM - 01:15 PM
    F110 - Salon Lab - F Building
    Kayla Ackerman
    		$532.62

    Pumps For The MMMP Trades (M-3) 50423732

  • 0.75 credits
  • Millwright
  • $120.26

    • Course compares different pump types and their applications. Apprentices will complete a field inspection of pumps and learn how to troubleshoot, remove, overhaul, install and perform preventative maintenance on pumps.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    04/14/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Apr 14
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    Apr 28
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    May 12
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$120.26

    Restaurant Operations 2 10316126

  • 2.00 credits
  • Culinary Arts
  • $337.58

    • Expand on the skills of Restaurant Operations while applying costing, menu development, and management skills. Learners will work in a restaurant setting for the entirety of this class experiencing the day to day challenges found in food service.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/17/2026 –
    05/14/2026
    		In-Person Wausau Main Campus
    Mar 17 – May 14
    Thursday, Tuesday, Wednesday
    08:00 AM - 02:00 PM
    E112 - Culinary Lab Wausau - E Building
    Jonathan Reinke
    		$337.58

    SDS & Adhesives And Sealants For MMMP Trade (C-14) 50423723

  • 0.25 credits
  • Millwright
  • $43.21

    • Course compares adhesives and sealant types and applications. Then apprentice skills will be developed related to applying adhesives and sealants to repair applications, interpreting MSDS information, and handling hazardous materials.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/31/2026
    		In-Person Wausau Main Campus
    Mar 31
    Tuesday
    07:30 AM - 04:00 PM
    H117 - Trades Lab/Classroom - H Building
    Ryan Vobornik
    		$43.21

    Sensitive Crimes 30504505

  • 2.00 credits
  • Criminal Justice
  • $362.58

    • Through classroom lecture, and on-campus lab and WI Department of Justice 720 Academy integration exercises, students will learn and apply skills addressed in the following Department of Justice 720 Academy curriculum framework Phase III topics: Domestics, Juvenile Law, Victims, Sexual Assault, and Child Maltreatment. The DOJ Phase III Written Examination will be administered in this course.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #02 Spring
    Open
    03/27/2026 –
    05/12/2026
    		In-Person Wausau Main Campus
    Mar 27 – May 12
    Monday, Tuesday, Wednesday, Thursday, Friday
    07:30 AM - 07:00 PM
    Wausau Main Campus
    Eric Soberg
    		$362.58

    Servo Systems 2: Motion Control Systems 10620162

  • 1.00 credits
  • Electromechanical Technology
  • $188.79

    • Introduces the principles of motion control. Multi-axis CNC machines are operated using G-Code programming and CAM software. Servo motors, stepper motors and feedback devices are studied using hands on lab activities.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/24/2026 –
    03/19/2026
    		In-Person Wausau Main Campus
    Feb 24 – Mar 19
    Thursday, Tuesday
    08:00 AM - 10:50 AM
    H129 - Classroom - H Building
    Matt Jacobson
    		$188.79

    Shielded Metal Arc Welding 1: E7018 10442192

  • 1.00 credits
  • Welding
  • $241.29

    • Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/17/2026 –
    02/25/2026
    		In-Person Wausau Main Campus
    Feb 17 – Feb 25
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Feb 17 – Feb 25
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    02/18/2026 –
    02/26/2026
    		In-Person Wausau Main Campus
    Feb 18 – Feb 26
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Shielded Metal Arc Welding 2: E6010, E7018 10442193

  • 1.00 credits
  • Welding
  • $241.29

    • Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/02/2026 –
    03/11/2026
    		In-Person Wausau Main Campus
    Mar 2 – Mar 11
    Monday, Wednesday
    07:00 AM - 12:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 2 – Mar 11
    Tuesday
    10:00 AM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    03/03/2026 –
    03/12/2026
    		In-Person Wausau Main Campus
    Mar 3 – Mar 12
    Thursday, Tuesday, Wednesday
    07:00 AM - 12:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Solidworks 1 10606133

  • 1.00 credits
  • Mechanical Technology
  • $171.29

    • Introduces the learner to basic SolidWorks commands to produce 3-dimentsional parts, assemblies and engineering drawings. The learner will master beginner level commands and have a thorough understanding of the basic operation of the software.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/24/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 19
    Tuesday
    01:00 PM - 03:50 PM
    F206 - Computer Lab - F Building
    Bryan LaVigne
    		$171.29

    Soup & Stock Production 10316109

  • 2.00 credits
  • Culinary Arts
  • $482.58

    • Introduces the preparation of clear, cream, puree and specialty soups. Learners will prepare basic stocks and soups. Additionally learners will evaluate convenience soups and stocks for quality and cost.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/16/2026 –
    03/12/2026
    		In-Person Wausau Main Campus
    Feb 16 – Mar 9
    Monday, Tuesday, Wednesday, Thursday
    08:30 AM - 01:30 PM
    E110 - Culinary Lab Wausau - E Building
    Brock Decker
    Mar 11 – Mar 12
    Thursday, Wednesday
    08:30 AM - 01:30 PM
    E110 - Culinary Lab Wausau - E Building
    Brock Decker
    		$482.58

    Steering And Suspension Service 10602213

  • 2.00 credits
  • Autotec
  • $362.58

    • Diagnose and repair of steering and suspension systems. Learners will conduct inspections to determine and complete servicing and replacement of steering and suspension components.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    04/15/2026
    		In-Person Wausau Main Campus
    Mar 23 – Apr 15
    Monday, Tuesday, Wednesday
    08:00 AM - 02:30 PM
    H112 - Red Auto Lab - H Building
    Zach Knetter
    		$362.58

    Transition To Trainer: Your Role As A Journey Worker 47455455

  • 0.20 credits
  • Supervision Management
  • $99.00

    • In this workshop you will be introduced to a new set of basic tools - the tools of a job site trainer. You will explore the skills that are necessary to be an effective trainer, discover how to deliver hands-on training, and examine the process for giving useful feedback.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD004 Spring
    Open
    02/17/2026
    		In-Person Wausau Main Campus
    Feb 17
    Tuesday
    08:00 AM - 04:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Joseph Dziedzic
    		$99.00
    #PD005 Spring
    Open
    03/24/2026
    		In-Person Wausau Main Campus
    Mar 24
    Tuesday
    08:00 AM - 04:30 PM
    A165 - WTPD Innovation Classroom A - A Building
    Joseph Dziedzic
    		$99.00

    Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

  • 1.00 credits
  • Welding
  • $241.29

    • This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    02/24/2026 –
    03/17/2026
    		In-Person Wausau Main Campus
    Feb 24 – Mar 17
    Monday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Feb 24 – Mar 17
    Tuesday
    07:00 AM - 09:50 AM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    02/24/2026 –
    03/19/2026
    		In-Person Wausau Main Campus
    Feb 24 – Mar 19
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Welding Fabrication Techniques 3: Production Welding 10442191

  • 1.00 credits
  • Welding
  • $241.29

    • Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

    2 Course Sections
    2 Course Sections
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #01 Spring
    Open
    03/23/2026 –
    05/19/2026
    		In-Person Wausau Main Campus
    Mar 23 – May 19
    Monday
    01:00 PM - 03:50 PM
    H124 - Trades Classroom - H Building
    Veronica Hope
    Mar 23 – May 19
    Tuesday
    07:00 AM - 09:50 AM
    H124 - Trades Classroom - H Building
    Veronica Hope
    		$241.29
    #02 Spring
    Open
    03/24/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Mar 24 – May 21
    Thursday, Tuesday
    01:00 PM - 03:50 PM
    H122 - Trades Classroom - H Building
    Daniel Grabko
    		$241.29

    Welding For Apprentices 47442443

  • 1.00 credits
  • Welding
  • $209.95

    • This course highlights the similarities in equipment and technique between the major arc welding processes. Students complete introductory level competencies in the GMAW, SMAW, FCAW, and GTAW processes. Material preparation skills include shearing, sawing, grinding, and thermal cutting. This course is 40 hours for apprenticeship programs.

    1 Course Section
    1 Course Section
    Section Status Start/End Date Register By Instruction Mode Campus Meeting Information Cost
    #PD004 Spring
    Open
    01/26/2026 –
    05/21/2026
    		In-Person Wausau Main Campus
    Jan 26 – May 21
    Monday, Tuesday, Wednesday, Thursday
    12:00 PM - 08:00 PM
    Wausau Main Campus
    Robert Leafblad
    		$209.95