Course Search | Northcentral Technical College

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

1.00 credits

Electromechanical Technology

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Effa	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Effa	View Rates

Industry Workplace Safety 10620172

1.00 credits

Electromechanical Technology

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Intro To Microcontrollers 10660121

1.00 credits

Electronics Foundation

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

1.00 credits

Electronics Foundation

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

3 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates
#01 Fall	Open	08/26/2025 – 09/18/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Sep 18 Thursday, Tuesday 10:00 AM - 12:50 PM I110 - Classroom - I Building Bryan Schroder Aug 26 – Sep 18 Thursday, Tuesday 10:00 AM - 12:50 PM I104B - AME Lab - I Building Bryan Schroder	View Rates

Fluid Power Systems 1: Fundamentals 10612120

1.00 credits

Fluid Power Technology

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Knospe	View Rates

Machine Control 1: Ladder Logic Fundamentals 10620151

1.00 credits

Electromechanical Technology

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Knospe	View Rates

Mechanical Systems 1: Basic Machine Components 10620157

1.00 credits

Electromechanical Technology

Introduces how machines work and basic mechanical power transmission system components.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Industrial Motors 1: Electric Motors 10620159

1.00 credits

Electromechanical Technology

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Knospe	View Rates

Electromechanical Troubleshooting 10620173

1.00 credits

Electromechanical Technology

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Matt Jacobson	View Rates

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

1.00 credits

Electromechanical Technology

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Matt Jacobson	View Rates

Shielded Metal Arc Welding 1: E7018 10442192

1.00 credits

Welding

Introduces process fundamentals, electrode selection and machine setup are discussed. Learners use Low hydrogen, "stick" electrodes to complete fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Shielded Metal Arc Welding 2: E6010, E7018 10442193

1.00 credits

Welding

Builds on skills developed in SMAW 1. Learners cellulose and low hydrogen electrogen electrodes in fillet and groove welds in all positions. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 5: Stainless Steel And Aluminum 10442204

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on stainless steel and aluminum.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 6: Sheet Metal 10442205

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer and pulsed spray transfer to make fillet and groove welds in the horizontal and vertical positions on sheet metal.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Introduction To Welding 10442101

1.00 credits

Welding

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Weld Inspection & Testing 10442163

1.00 credits

Welding

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Welding Safety 10442172

1.00 credits

Welding

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Thermal Cutting 10442173

1.00 credits

Welding

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Weld Print Reading 1: Basic Views And Dimensions 10442181

1.00 credits

Welding

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Weld Print Reading 2: Other Views And Symbols 10442182

1.00 credits

Welding

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Metal Arc Welding 1: Short Circuit Transfer (Horizontal) 10442183

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the flat and horizontal positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Gas Metal Arc Welding 2: Short Circuit Transfer (Vertical And Overhead) 10442184

1.00 credits

Welding

Develops skill in gas metal arc welding. Learners use short circuit transfer to make fillet and groove welds in the vertical and overhead positions on steel. Weld quality is assessed per AWS D1.1 Structural Steel Code.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

1.00 credits

Electronics Foundation

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

1.00 credits

Electronics Foundation

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

5 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates
#90 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Wausau Main Campus	Aug 25 – Dec 17 - I104A - AME Lab - I Building Bryan Schroder	View Rates
#91 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#92 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Machine Control 2: Motor And Actuator Control 10620152

1.00 credits

Electromechanical Technology

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Knospe	View Rates

Machine Control 3: Sensors And Machine Safety 10620153

1.00 credits

Electromechanical Technology

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Knospe	View Rates

Electrical Fabrication 10660118

1.00 credits

Electronics Foundation

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Matt Jacobson	View Rates

Industrial Electronics Technology 4 - Electrical Systems 10660126

1.00 credits

Electronics Foundation

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Mechanical Systems 2: Power Transmission Systems 10620158

1.00 credits

Electromechanical Technology

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Bryan Schroder	View Rates

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

1.00 credits

Fluid Power Technology

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#81 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Antigo Campus	Aug 25 – Dec 17 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Knospe	View Rates

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

1.00 credits

Electromechanical Technology

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Effa	View Rates

PLC 2: Timers, Counters And Program Control 10620165

1.00 credits

Electromechanical Technology

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101B - IEMT Lab - Phillips Campus Benjamin Effa	View Rates

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

1.00 credits

Welding

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

1.00 credits

Welding

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

1.00 credits

Welding

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Welding Fabrication Techniques 1: International Weld Symbols 10442189

1.00 credits

Welding

This course provides for advanced competency in interpreting international weld symbols and ISO prints. Prints utilizing first angle projection are studied and fabricated.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Welding Fabrication Techniques 2: GD&T And Pipe Prints 10442190

1.00 credits

Welding

This course provides for an introduction to Geometric Dimensioning and Tolerancing and Pipe Prints. Prints are studied and fabricated.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Welding Fabrication Techniques 3: Production Welding 10442191

1.00 credits

Welding

Interpret and fabricate several different prints in this course. Practice interpreting and fabricating prints in a timely manner is emphasized. As the course progresses, student's design, plan, and fabricate a project of their own using all of the knowledge and skills they have acquired in Fab Tech 1 & 2.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#82 Fall	Open	08/25/2025 – 12/17/2025	08/30/2025	In-Person Open Labs	Phillips Campus	Aug 25 – Dec 17 - P101 - Welding Lab - Phillips Campus Adam Zogata	View Rates

Food Safety & Sanitation Certification 47303476

0.30 credits

Foods

$109.00

This state approved course prepares you for the National Restaurant Association Certification examination from the Department of Health and Social Services by providing managers and employees in the food-service industry the knowledge of food-safety procedures. By taking this state approved course and passing the certification examination, you will be eligible to apply for your Certified Food Manager License from the Department of Health and Social Services. The National Restaurant Association certification examination is the third night of the course. Textbook required from the NTC Bookstore.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD001 Fall	Open	08/25/2025 – 12/17/2025	12/12/2025	Online	Online	Aug 25 – Dec 17 - Online Rich Neumann	$109.00

Registered Behavior Technician 47520428

1.00 credits

Human Services

$199.00

The Registered Behavior Technician (RBT®) is a nationally recognized paraprofessional certification in behavior analysis. RBTs assist in areas such as delivering direct behavior-analytic services, aiding in implementing behavior plans which are developed by the BCBA or BCaBA, and collecting data. Completing this 40-hour course will provide students with the necessary training hours required for access to the RBT certification exam with the Behavior Analysis Certification Board (An exam separate from NTC).

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD001 Fall	Open	08/25/2025 – 12/17/2025	11/19/2025	Online	Online	Aug 25 – Dec 17 - Online Tara Geier	$199.00

Welding For Apprentices 47442443

1.00 credits

Welding

$209.95

This course highlights the similarities in equipment and technique between the major arc welding processes. Students complete introductory level competencies in the GMAW, SMAW, FCAW, and GTAW processes. Material preparation skills include shearing, sawing, grinding, and thermal cutting. This course is 40 hours for apprenticeship programs.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD003 Fall	Open	08/25/2025 – 12/17/2025	12/10/2025	In-Person	Wausau Main Campus	Aug 25 – Dec 17 Monday, Tuesday, Wednesday 12:00 PM - 08:00 PM Wausau Main Campus Robert Leafblad Aug 28 – Dec 11 Thursday 12:00 PM - 05:00 PM Wausau Main Campus Robert Leafblad	$209.95

Clinical Supervision In Substance Abuse Counseling 47520410

0.75 credits

Human Services

$199.00

The Clinical Supervision in Substance Abuse Counseling course is designed to fulfill the Wisconsin Department of Safety and Professional Services requirement of 30 hours of classroom training in clinical supervision. This course is designed for working professionals with the flexibility of online and self-paced. Each module includes a minimum of 6 hours of training in each of the following domains: Assessment or Evaluation, Counselor Development, Management or Administration, Professional Responsibility.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD003 Fall	Open	08/25/2025 – 12/17/2025	11/19/2025	Online	Online	Aug 25 – Dec 17 - Online April McHugh	$199.00

Train The Trainer For Nursing Assistant Primary Instructors 47543435

0.50 credits

Nursing

$199.00

The Nursing Assistant Instructor Train-the-Trainer Program is designed to equip healthcare professionals with the knowledge, skills, and competencies needed to effectively teach and train nursing assistant students. This comprehensive program focuses on adult learning principles, curriculum development, lesson planning, teaching strategies, and student performance evaluation. Participants will also gain expertise in supervising clinical practice and ensuring compliance with state and federal regulations governing nursing assistant education. Learner must have valid Wisconsin RN license and two years work experience (one year in long-term, home health, or rehabilitation care). This course will meet the state requirement for nurses who wish to become nursing assistant instructors.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD004 Fall	Open	08/25/2025 – 12/17/2025	12/05/2025	Online	Online	Aug 25 – Dec 17 - Online Karen Simington	$199.00

ACLS - Advanced Cardiac Life Support 47531440

0.40 credits

Emergency Medical Services

$149.00

Medical professionals who respond to cardiovascular emergencies in and out of the hospital enhance their treatment knowledge and skills through the AHA’s ACLS training courses.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD009 Fall	Open	08/25/2025 – 08/26/2025	08/25/2025	In-Person	Wausau Main Campus	Aug 25 – Aug 26 Monday, Tuesday 08:00 AM - 04:00 PM A162 - CPR Classroom - A Building Joseph Redding Aug 25 – Aug 26 Monday, Tuesday 08:00 AM - 04:00 PM A165 - WTPD Innovation Classroom A - A Building Joseph Redding	$149.00

BLS (Basic Life Support) CPR 47531437

0.10 credits

Emergency Medical Services

$40.00

This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD060 Fall	Open	08/25/2025	08/25/2025	In-Person	Public Safety Center of Excellence	Aug 25 Monday 05:30 PM - 09:30 PM PS110 - Command Center Classroom - Public Safety Center of Excellence Michael Jankowski	$40.00

NREMT Paramedic Refresher 47531501

1.50 credits

Emergency Medical Services

$243.00

Provides the State of Wisconsin Paramedic the continuing education required for renewing the provider's license at Wisconsin Department of Health Services(DHS} and renewing the National Registry certification. This program follows the Paramedic National Continued Competency Program (NCCP) curriculum. The NCCP is provided by the National Registry of Emergency Medical Technicians.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PS001 Fall	Open	08/25/2025 – 12/17/2025	12/03/2025	Online	Online	Aug 25 – Dec 17 - Online William Isham	$243.00

NREMT EMR Refresher (16hr) 47531513

0.40 credits

Emergency Medical Services

$70.00

Upon successful completion of the EMR (Emergency Medical Responder) Refresher course, the learner will be eligible to renew their WI State License and renew their National Registry Certification.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PS001 Fall	Open	08/25/2025 – 12/17/2025	12/03/2025	Online	Online	Aug 25 – Dec 17 - Online Paul Scheffler	$70.00

NREMT EMT Refresher 47531503

1.00 credits

Emergency Medical Services

$162.00

Provides the State of Wisconsin Emergency Medical Technician (EMT) thecontinuing education required for renewing the provider's license at Wisconsin Department of Health Services (DHS) and renewing the National Registry certification. This program follows the EMT National Continued Competency Program (NCCP) curriculum. The NCCP is provided by the National Registry ofEmergency Medical Technicians.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PS001 Fall	Open	08/25/2025 – 12/17/2025	12/03/2025	Online	Online	Aug 25 – Dec 17 - Online Paul Scheffler	$162.00

NREMT AEMT Refresher 47531502

1.25 credits

Emergency Medical Services

$203.00

Provides the State of Wisconsin Advanced Emergency Medical Technician (AEMT) the continuing education required for renewing the provider's license at Wisconsin Department of Health Services (DHS) and renewing the National Registry certification. This program follows the AEMT National Continued Competency Program (NCCP) curriculum. The NCCP is provided by the National Registry of Emergency Medical Technicians.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PS001 Fall	Open	08/25/2025 – 12/17/2025	12/03/2025	Online	Online	Aug 25 – Dec 17 - Online	$203.00

Critical Care Paramedic Refreser 47531500

0.60 credits

Emergency Medical Services

$100.00

Provides the continuing education required for renewing the Critical Care endorsement for the Wisconsin Department of Health Services (DHS). Provides the necessary training for awareness of critical care equipment and assessment tools needed to care for a patient during the mobile transition from ground care to an acute care setting. Reviews the basic principles of critical care transport including pharmacology, monitoring, lab values, and ventilation.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PS001 Fall	Open	08/25/2025 – 12/17/2025	12/03/2025	Online	Online	Aug 25 – Dec 17 - Online	$100.00

Certified Fire Fighter 1 47503720

2.40 credits

Fire Technology

This 96-hour course prepares the participant to be able to perform fire fighting functions at the nationally recognized minimum levels under direct supervision. The targeted audience is individuals who desire to become Wisconsin Certified Fire Fighter I based on the requirements set by SPS 330.08, Employment standards, Wisconsin Department of Safety and Professional Services. This course is designed to provide the Fire Fighter I candidate with the information needed to meet the job performance requirements (JPRs) defined in NFPA 1001, Standard for Fire Fighter Professional Qualifications, Current Edition, Chapters 5.2 through 5.5. The participant must also complete the Hazardous Materials Operation level course in order to meet the remainder of the NFPA Fire Fighter I JPR requirements.

5 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PS003 Fall	Open	08/25/2025 – 11/10/2025	08/25/2025	In-Person	Public Safety Center of Excellence	Aug 25 – Aug 27 Monday, Wednesday 09:30 AM - 01:30 PM PS111 - Command Center Classroom - Public Safety Center of Excellence Bryson Cruise Sep 3 – Nov 10 Monday, Wednesday 09:30 AM - 01:30 PM PS111 - Command Center Classroom - Public Safety Center of Excellence Bryson Cruise Oct 25 Saturday 08:00 AM - 04:00 PM PS111 - Command Center Classroom - Public Safety Center of Excellence Bryson Cruise	View Rates
#PS004 Fall	Open	08/25/2025 – 11/10/2025	08/25/2025	In-Person	Public Safety Center of Excellence	Aug 25 – Aug 27 Monday, Wednesday 09:30 AM - 01:30 PM Public Safety Center of Excellence Bryson Cruise Sep 3 – Nov 10 Monday, Wednesday 09:30 AM - 01:30 PM Public Safety Center of Excellence Bryson Cruise Oct 25 Saturday 08:00 AM - 04:00 PM Public Safety Center of Excellence Bryson Cruise	$413.00
#PS005 Fall	Open	08/25/2025 – 11/10/2025	08/25/2025	In-Person	Public Safety Center of Excellence	Aug 25 – Aug 27 Monday, Wednesday 06:00 PM - 10:00 PM PS111 - Command Center Classroom - Public Safety Center of Excellence Bryson Cruise Sep 3 – Nov 10 Monday, Wednesday 06:00 PM - 10:00 PM PS111 - Command Center Classroom - Public Safety Center of Excellence Bryson Cruise Oct 25 Saturday 08:00 AM - 04:00 PM Public Safety Center of Excellence Bryson Cruise	View Rates
#PS006 Fall	Open	08/25/2025 – 11/10/2025	08/25/2025	In-Person	Public Safety Center of Excellence	Aug 25 – Aug 27 Monday, Wednesday 06:00 PM - 10:00 PM Public Safety Center of Excellence Bryson Cruise Sep 3 – Nov 10 Monday, Wednesday 06:00 PM - 10:00 PM Public Safety Center of Excellence Bryson Cruise Oct 25 Saturday 08:00 AM - 04:00 PM Public Safety Center of Excellence Bryson Cruise	$413.00
#PS010 Fall	Open	08/25/2025 – 11/10/2025	08/29/2025	In-Person	Public Safety Center of Excellence Spencer Off Campus	Aug 25 – Nov 10 Monday, Wednesday 06:00 PM - 10:00 PM Central Fire and EMS District - Spencer Off Campus Kyle Lech Oct 25 Saturday 08:00 AM - 04:00 PM Public Safety Center of Excellence Kyle Lech	View Rates

Building Trade Statics 10614184

3.00 credits

Architectural Technology

Explores the methods of calculating building loads and subsequent analysis of their effect on structural members. Examines topics including: the design of floor joists, headers, basement beams, tall walls and columns in residential and light commercial construction. Conventional lumber, manufactured lumber and steel beams and columns will be sized by standard calculations and manufacture/third party computer software.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 01:30 PM - 03:50 PM F212 - Classroom/Computer Lab - F Building Travis Severson Aug 26 – Dec 16 Thursday 01:00 PM - 03:30 PM F212 - Classroom/Computer Lab - F Building Travis Severson	View Rates

Advanced Civil 3D 10607110

3.00 credits

Civil Engineering Technology

Utilizes the knowledge gained in previous semesters to build more complex design models, add new features, and analyze their designs even further, with functions like vehicle tracking, quantity take Off tools, and storm & sanitary analysis. Provides a deeper development of complex corridor targeting in roadway design and advanced grading tools for site designs, all while adding additional underground utilities to our design models and plan sets. These tools will then again be used to create accurate construction models and plans sets ready for practical use.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person Zoom Available	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 10:00 AM - 12:50 PM H104 - Computer Lab - H Building Michael Kowal Aug 26 – Dec 16 Thursday 10:00 AM - 11:50 AM H104 - Computer Lab - H Building Michael Kowal	View Rates

Basic Engineering Statics 10607112

1.00 credits

Civil Engineering Technology

Provides an introduction to Statics related to Engineering including the following topics; general static principals; force vectors; force system resultants; structural analysis (including simple trusses, zero-force members, and method of sections); characteristics of friction (including dry friction, wedges, and rolling resistance); center of gravity; and moments of inertia.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person Zoom Available	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 01:00 PM - 01:50 PM H104 - Computer Lab - H Building Michael Kowal	View Rates

Architectural Design 3 10614155

3.00 credits

Architectural Technology

Provides instruction in the design and preparation of working drawings for a tri-level residence on a city lot to meet local and state codes. Learners will prepare drawings for bidding as produced in an architectural or custom design office. Coursework will include the preparation of site plans, floor plans, foundation plans, elevations, sections, framing plans and finish schedules. Special emphasis is placed on utilizing high efficiency approaches to building construction.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 10:00 AM - 12:30 PM F212 - Classroom/Computer Lab - F Building Travis Severson Aug 26 – Dec 16 Thursday 09:00 AM - 11:50 AM F212 - Classroom/Computer Lab - F Building Travis Severson	View Rates

Print Reading For The Machine Trades 3 32420656

1.00 credits

Machine Shop

Develop advanced proficiency in reading and interpreting working industrial drawings, including assembly prints and detail prints. Specialized part prints are covered including gears, fastener, springs, cams, plastic components and sheet metal type drawings.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Oct 16 Thursday, Tuesday 07:00 AM - 08:50 AM H115 - Machine Tool Lab/Classroom - H Building Jeff Block	View Rates

Vertebrate Anatomy & Physiology 10091223

4.00 credits

Animal Husbandry

Examine the body systems of vertebrate animals. Learning activities include animal dissections. This course establishes the essential framework required for becoming a veterinary technician.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/17/2025	08/30/2025	In-Person	Agriculture Center of Excellence	Aug 26 – Dec 17 Tuesday 11:00 AM - 12:30 PM AG107 - Ag Science Lab - Agriculture Center of Excellence Katy-Jane Shanak Aug 26 – Dec 17 Tuesday 01:30 PM - 03:00 PM AG107 - Ag Science Lab - Agriculture Center of Excellence Katy-Jane Shanak Aug 26 – Dec 17 Wednesday 01:00 PM - 02:50 PM AG107 - Ag Science Lab - Agriculture Center of Excellence Katy-Jane Shanak	View Rates

Intro To Clinical Care Management 10543108

2.00 credits

Nursing

This clinical experience applies nursing concepts and therapeutic nursing interventions to groups of patients across the lifespan. It also provides an introduction to leadership, management, and team building.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Closed	08/26/2025 – 12/08/2025	08/30/2025	In-Person	Wausau Main Campus Wausau Off Campus	Aug 26 Tuesday 08:00 AM - 05:00 PM Wausau Main Campus Jennifer Oelke Sep 8 Monday 08:00 AM - 05:00 PM Wausau Main Campus Jennifer Oelke Sep 9 – Oct 7 Monday, Tuesday 06:00 AM - 03:00 PM Wausau Off Campus Jennifer Oelke Dec 8 Monday 08:00 AM - 05:00 PM Wausau Main Campus Jennifer Oelke	View Rates

Agriculture Equipment Safety 10093103

2.00 credits

Crop And Soil

Explore the work environment of an agriculture equipment technician. Learners will practice safe use of basic hand and power tools. Additionally, learners will cover various types of equipment safe operation in both a shop and farm environment. Learners will complete an agriculture equipment driving examination.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Agriculture Center of Excellence	Aug 26 – Dec 16 Tuesday 08:30 AM - 11:50 AM AG207 - Ag Classroom - Agriculture Center of Excellence Alex Crockford	View Rates

Network Operations Management 10150502

3.00 credits

IT - Network Specialist

Manage a computing environment using well known enterprise level system management tools that provide a comprehensive solution for client and server management. In this class you will configure software deployment, Operating System deployment, patch management, Identity and Security management, and inventory management of the infrastructure.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/14/2025	08/30/2025	In-Person Zoom Only	ZOOM	Aug 26 – Oct 14 Tuesday 01:00 PM - 04:50 PM ZOOM Scott Biscobing	View Rates

Advanced Page Layout 10204130

2.00 credits

Graphic Communication Tech

Applies techniques and skills learned in previous computer courses to advanced page layout projects. Learners will revisit the principles of design, prioritize work, prepare jobs for production, create output ready documents, examine the job planning process and apply advanced techniques for print, web and mobile presentation.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/14/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Oct 14 Tuesday 09:00 AM - 11:50 AM H123 - Computer Lab - H Building Andrew Somers Aug 26 – Oct 14 Tuesday 01:00 PM - 02:50 PM H123 - Computer Lab - H Building Andrew Somers	View Rates

Restaurant Operations 10316114

4.00 credits

Culinary Arts

Prepare foods in a lab setting while participating in various stations that are typically found in a restaurant. Learners will establish skills in serving, cooking, and customer service.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 11/06/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Nov 6 Thursday, Tuesday, Wednesday 08:00 AM - 02:00 PM E112 - Culinary Lab Wausau - E Building Jonathan Reinke Oct 3 Friday 04:00 PM - 10:00 PM E112 - Culinary Lab Wausau - E Building Jonathan Reinke Nov 3 Monday 08:00 AM - 02:00 PM E112 - Culinary Lab Wausau - E Building Jonathan Reinke	View Rates

Intro To Surgical Technology 10512125

4.00 credits

Surgical Technician

Provides the foundational knowledge of the occupational environment. Principles of sterilization and disinfection are learned. Surgical instruments are introduced. Preoperative patient care concepts are simulated. Lab practice is included.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Thursday, Tuesday 10:00 AM - 12:00 PM 3049 - Open Surgical Suite - Center for Health Sciences (CHS) Tyler Mann Aug 26 – Dec 16 Thursday, Tuesday 09:00 AM - 10:00 AM 3045 - Mock Surgical Classroom - Center for Health Sciences (CHS) Tyler Mann	View Rates

Surgical Tech Fundamentals 1 10512126

4.00 credits

Surgical Technician

Focuses on preparing the patient and operating room for surgery. Principles of sterile technique are emphasized as the student moves into the scrub role. Lab practice is included.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Thursday, Tuesday 01:00 PM - 02:00 PM 3045 - Mock Surgical Classroom - Center for Health Sciences (CHS) Tyler Mann Aug 26 – Dec 16 Thursday, Tuesday 02:00 PM - 04:00 PM 3049 - Open Surgical Suite - Center for Health Sciences (CHS) Tyler Mann	View Rates

American Sign Language 3 10533130

2.00 credits

Interpreter Technology

Develops advanced skills in American Sign Language including vocabulary, grammar and comprehensive communication. Emphasis will be on direct frequent contact with native ASL users. The learners explores Deaf Culture. Face to face delivery only.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/17/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 17 Tuesday, Wednesday 01:00 PM - 02:30 PM A219 - Sign Language Lab - A Building Chanel Volpel	View Rates

Understanding Substance Use 10550201

3.00 credits

Substance Use Disorder Counseling

Explore the bio-psych social dynamics of substance use. Examine treatment approaches, models, and screening criteria. Examine substances of abuse, history of SUDs, and their impact on the individual and society.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 10/14/2025	08/30/2025	In-Person Zoom Available	Wausau Main Campus	Aug 26 – Oct 14 Tuesday 08:30 AM - 12:30 PM A229 - Classroom - A Building Christina Lucas	View Rates

Imaging Modalities 10526231

2.00 credits

Radiologic Technology

Introduces radiography students to imaging modalities with an emphasis in computed tomography and cross-sectional anatomy.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/09/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 9 Tuesday 08:00 AM - 09:50 AM 3031 - Radiology Classroom - Center for Health Sciences (CHS) Amber Schuck	View Rates

Capstone CELL Integration 10664107

4.00 credits

Automation Systems Technology

Focuses on integration of a complete automated manufacturing cell. Typical components include programmable controllers, robot, sensors, drives, conveyors, pneumatics, hard automation, control wiring and vision systems. Students plan, wire, program, troubleshoot and develop an automated manufacturing process based on the “product” chosen by the group. All required programming and documentation for the entire automation system is required

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#01 Fall	Open	08/26/2025 – 12/16/2025	08/30/2025	In-Person	Wausau Main Campus	Aug 26 – Dec 16 Tuesday 08:00 AM - 09:50 AM I104A - AME Lab - I Building Benjamin Knospe Aug 26 – Dec 16 Tuesday 10:00 AM - 12:20 PM I105 - Smart Project Factory Lab - I Building Benjamin Knospe Aug 26 – Dec 16 Thursday 08:00 AM - 08:50 AM I104A - AME Lab - I Building Benjamin Knospe Aug 26 – Dec 16 Thursday 09:00 AM - 12:20 PM I105 - Smart Project Factory Lab - I Building Benjamin Knospe	View Rates